lkml.org 
[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] i2c: allow specify device properties in i2c_board_info
On Tue, Jan 31, 2017 at 06:11:30PM -0800, Dmitry Torokhov wrote:
> With many drivers converting to using generic device properties, it is
> useful to provide array of device properties when instantiating new i2c
> client via i2c_board_info and have them automatically added to the device
> in question.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/i2c/i2c-core.c | 16 +++++++++++++++-
> include/linux/i2c.h | 3 +++
> 2 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index f009549f86a5..3897e78e5e9a 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -1335,15 +1335,29 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
> client->dev.fwnode = info->fwnode;
>
> i2c_dev_set_name(adap, client);
> +
> + if (info->properties) {
> + status = device_add_properties(&client->dev, info->properties);

I don't remember anymore how it was but is the driver core supposed to
free this automatically when the device is removed or should we deal
this in the i2c-core instead?

> + if (status) {
> + dev_err(&adap->dev,
> + "Failed to add properties to client %s: %d\n",
> + client->name, status);
> + goto out_err;
> + }
> + }
> +
> status = device_register(&client->dev);
> if (status)
> - goto out_err;
> + goto out_free_props;
>
> dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
> client->name, dev_name(&client->dev));
>
> return client;
>
> +out_free_props:
> + if (info->properties)
> + device_remove_properties(&client->dev);
> out_err:
> dev_err(&adap->dev,
> "Failed to register i2c client %s at 0x%02x (%d)\n",
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index 4aa7d244b38a..ec8f866a5656 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -51,6 +51,7 @@ enum i2c_slave_event;
> typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum i2c_slave_event, u8 *);
>
> struct module;
> +struct property_entry;
>
> #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
> /*
> @@ -310,6 +311,7 @@ static inline int i2c_slave_event(struct i2c_client *client,
> * @archdata: copied into i2c_client.dev.archdata
> * @of_node: pointer to OpenFirmware device node
> * @fwnode: device node supplied by the platform firmware
> + * @properties: additional device properties for the device
> * @irq: stored in i2c_client.irq
> *
> * I2C doesn't actually support hardware probing, although controllers and
> @@ -331,6 +333,7 @@ struct i2c_board_info {
> struct dev_archdata *archdata;
> struct device_node *of_node;
> struct fwnode_handle *fwnode;
> + const struct property_entry *properties;
> int irq;
> };
>
> --
> 2.11.0.483.g087da7b7c-goog

\
 
 \ /
  Last update: 2017-02-01 16:27    [W:0.070 / U:7.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site