[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 00/24] i.MX Media Driver
On Wed, Feb 01, 2017 at 11:42:31AM +0100, Philipp Zabel wrote:
> On Wed, 2017-02-01 at 10:11 +0000, Russell King - ARM Linux wrote:
> Right, it's just that in the latest version there is no v4l2_subdev for
> fifos and idmac. There is the capture interface entity that represents
> one of the IDMAC write channels, but that doesn't have a pad and format
> configuration.
> The SMFC entity was removed because the fifo can be considered part of
> the link between CSI and IDMAC. There is no manual configuration
> necessary as the SMFC itself can't do anything to the data that flows
> through it. There is no reason to present it to userspace as a no-op
> entity.
> So in the direct CSI -> SMFC -> IDMAC case, the CSI source pad now is
> the nearest neighbor pad to the IDMAC capture video device.

Ok, that sounds fine then.

RMK's Patch system:
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to

 \ /
  Last update: 2017-02-01 11:55    [W:0.098 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site