lkml.org 
[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:efi/core] efi/libstub: Preserve .debug sections after absolute relocation check
Commit-ID:  696204faa6e8a318320ebb49d9fa69bc8275644d
Gitweb: http://git.kernel.org/tip/696204faa6e8a318320ebb49d9fa69bc8275644d
Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
AuthorDate: Tue, 31 Jan 2017 13:21:42 +0000
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Wed, 1 Feb 2017 08:45:47 +0100

efi/libstub: Preserve .debug sections after absolute relocation check

The build commands for the ARM and arm64 EFI stubs strip the .debug
sections and other sections that may legally contain absolute relocations,
in order to inspect the remaining sections for the presence of such
relocations.

This leaves us without debugging symbols in the stub for no good reason,
considering that these sections are omitted from the kernel binary anyway,
and that these relocations are thus only consumed by users of the ELF
binary, such as debuggers.

So move to 'strip' for performing the relocation check, and if it succeeds,
invoke objcopy as before, but leaving the .debug sections in place. Note
that these sections may refer to ksymtab/kcrctab contents, so leave those
in place as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1485868902-20401-11-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
drivers/firmware/efi/libstub/Makefile | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index d564d25..33e0e2f 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -11,7 +11,7 @@ cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ -O2 \
-mno-mmx -mno-sse

cflags-$(CONFIG_ARM64) := $(subst -pg,,$(KBUILD_CFLAGS))
-cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) -g0 \
+cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) \
-fno-builtin -fpic -mno-single-pic-base

cflags-$(CONFIG_EFI_ARMSTUB) += -I$(srctree)/scripts/dtc/libfdt
@@ -60,7 +60,7 @@ CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
extra-$(CONFIG_EFI_ARMSTUB) := $(lib-y)
lib-$(CONFIG_EFI_ARMSTUB) := $(patsubst %.o,%.stub.o,$(lib-y))

-STUBCOPY_FLAGS-y := -R .debug* -R *ksymtab* -R *kcrctab*
+STUBCOPY_RM-y := -R *ksymtab* -R *kcrctab*
STUBCOPY_FLAGS-$(CONFIG_ARM64) += --prefix-alloc-sections=.init \
--prefix-symbols=__efistub_
STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
@@ -68,17 +68,25 @@ STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
$(obj)/%.stub.o: $(obj)/%.o FORCE
$(call if_changed,stubcopy)

+#
+# Strip debug sections and some other sections that may legally contain
+# absolute relocations, so that we can inspect the remaining sections for
+# such relocations. If none are found, regenerate the output object, but
+# this time, use objcopy and leave all sections in place.
+#
quiet_cmd_stubcopy = STUBCPY $@
- cmd_stubcopy = if $(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@; then \
- $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y) \
- && (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
- rm -f $@; /bin/false); else /bin/false; fi
+ cmd_stubcopy = if $(STRIP) --strip-debug $(STUBCOPY_RM-y) -o $@ $<; \
+ then if $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y); \
+ then (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
+ rm -f $@; /bin/false); \
+ else $(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@; fi \
+ else /bin/false; fi

#
# ARM discards the .data section because it disallows r/w data in the
# decompressor. So move our .data to .data.efistub, which is preserved
# explicitly by the decompressor linker script.
#
-STUBCOPY_FLAGS-$(CONFIG_ARM) += --rename-section .data=.data.efistub \
- -R ___ksymtab+sort -R ___kcrctab+sort
+STUBCOPY_FLAGS-$(CONFIG_ARM) += --rename-section .data=.data.efistub
+STUBCOPY_RM-$(CONFIG_ARM) += -R ___ksymtab+sort -R ___kcrctab+sort
STUBCOPY_RELOC-$(CONFIG_ARM) := R_ARM_ABS
\
 
 \ /
  Last update: 2017-02-01 10:50    [W:0.129 / U:2.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site