lkml.org 
[lkml]   [2017]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] clocksource: sprd: Add timer driver for Spreadtrum SC9860 platform
Hi Daniel,

On 8 December 2017 at 14:58, Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
> On 08/12/2017 06:03, Baolin Wang wrote:
>> The Spreadtrum SC9860 platform will use the architected timers as local
>> clock events, but we also need a broadcast timer device to wakeup the
>> cpus when the cpus are in sleep mode.
>>
>> The Spreadtrum timer can support 32bit or 64bit counter, as well as
>> supporting period mode or one-shot mode.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>> ---
>> Changes since v2:
>> - Add more timer description in changelog.
>> - Rename the driver file.
>> - Remove GENERIC_CLOCKEVENTS and ARCH_SPRD dependency.
>> - Remove some redundant headfiles.
>> - Use timer-of APIs.
>> - Change the license format according to Linus[1][2][3],
>> Thomas[4] and Greg[5] comments on the topic.
>> [1] https://lkml.org/lkml/2017/11/2/715
>> [2] https://lkml.org/lkml/2017/11/25/125
>> [3] https://lkml.org/lkml/2017/11/25/133
>> [4] https://lkml.org/lkml/2017/11/2/805
>> [5] https://lkml.org/lkml/2017/10/19/165
>>
>> Changes since v1:
>> - Change to 32bit counter to avoid build warning.
>> ---
>> drivers/clocksource/Kconfig | 7 ++
>> drivers/clocksource/Makefile | 1 +
>> drivers/clocksource/timer-sprd.c | 168 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 176 insertions(+)
>> create mode 100644 drivers/clocksource/timer-sprd.c
>>
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index c729a88..9a6b087 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -441,6 +441,13 @@ config MTK_TIMER
>> help
>> Support for Mediatek timer driver.
>>
>> +config SPRD_TIMER
>> + bool "Spreadtrum timer driver" if COMPILE_TEST
>> + depends on HAS_IOMEM
>> + select TIMER_OF
>> + help
>> + Enables the support for the Spreadtrum timer driver.
>> +
>> config SYS_SUPPORTS_SH_MTU2
>> bool
>>
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 72711f1..d6dec44 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -54,6 +54,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
>> obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
>> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
>> obj-$(CONFIG_OWL_TIMER) += owl-timer.o
>> +obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
>>
>> obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
>> obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
>> diff --git a/drivers/clocksource/timer-sprd.c b/drivers/clocksource/timer-sprd.c
>> new file mode 100644
>> index 0000000..81a5f0c
>> --- /dev/null
>> +++ b/drivers/clocksource/timer-sprd.c
>> @@ -0,0 +1,168 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2017 Spreadtrum Communications Inc.
>> + */
>> +
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +
>> +#include "timer-of.h"
>> +
>> +#define TIMER_NAME "sprd_timer"
>> +
>> +#define TIMER_LOAD_LO 0x0
>> +#define TIMER_LOAD_HI 0x4
>> +#define TIMER_VALUE_LO 0x8
>> +#define TIMER_VALUE_HI 0xc
>> +
>> +#define TIMER_CTL 0x10
>> +#define TIMER_CTL_PERIOD_MODE BIT(0)
>> +#define TIMER_CTL_ENABLE BIT(1)
>> +#define TIMER_CTL_64BIT_WIDTH BIT(16)
>> +
>> +#define TIMER_INT 0x14
>> +#define TIMER_INT_EN BIT(0)
>> +#define TIMER_INT_RAW_STS BIT(1)
>> +#define TIMER_INT_MASK_STS BIT(2)
>> +#define TIMER_INT_CLR BIT(3)
>> +
>> +#define TIMER_VALUE_SHDW_LO 0x18
>> +#define TIMER_VALUE_SHDW_HI 0x1c
>> +
>> +#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
>> +
>> +static void sprd_timer_enable(void __iomem *base, u32 flag)
>> +{
>> + u32 val = readl_relaxed(base + TIMER_CTL);
>> +
>> + val |= TIMER_CTL_ENABLE;
>> + if (flag & TIMER_CTL_64BIT_WIDTH)
>> + val |= TIMER_CTL_64BIT_WIDTH;
>> + else
>> + val &= ~TIMER_CTL_64BIT_WIDTH;
>> +
>> + if (flag & TIMER_CTL_PERIOD_MODE)
>> + val |= TIMER_CTL_PERIOD_MODE;
>> + else
>> + val &= ~TIMER_CTL_PERIOD_MODE;
>> +
>> + writel_relaxed(val, base + TIMER_CTL);
>> +}
>> +
>> +static void sprd_timer_disable(void __iomem *base)
>> +{
>> + u32 val = readl_relaxed(base + TIMER_CTL);
>> +
>> + val &= ~TIMER_CTL_ENABLE;
>> + writel_relaxed(val, base + TIMER_CTL);
>> +}
>> +
>> +static void sprd_timer_update_counter(void __iomem *base, unsigned long cycles)
>> +{
>> + writel_relaxed(cycles & TIMER_VALUE_LO_MASK, base + TIMER_LOAD_LO);
>> + writel_relaxed(0, base + TIMER_LOAD_HI);
>> +}
>> +
>> +static void sprd_timer_enable_interrupt(void __iomem *base)
>> +{
>> + writel_relaxed(TIMER_INT_EN, base + TIMER_INT);
>> +}
>> +
>> +static void sprd_timer_clear_interrupt(void __iomem *base)
>> +{
>> + u32 val = readl_relaxed(base + TIMER_INT);
>> +
>> + val |= TIMER_INT_CLR;
>> + writel_relaxed(val, base + TIMER_INT);
>> +}
>> +
>> +static int sprd_timer_set_next_event(unsigned long cycles,
>> + struct clock_event_device *ce)
>> +{
>> + struct timer_of *to = to_timer_of(ce);
>> +
>> + sprd_timer_disable(timer_of_base(to));
>> + sprd_timer_update_counter(timer_of_base(to), cycles);
>> + sprd_timer_enable(timer_of_base(to), 0);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_timer_set_periodic(struct clock_event_device *ce)
>> +{
>> + struct timer_of *to = to_timer_of(ce);
>> +
>> + sprd_timer_disable(timer_of_base(to));
>> + sprd_timer_update_counter(timer_of_base(to), timer_of_period(to));
>> + sprd_timer_enable(timer_of_base(to), TIMER_CTL_PERIOD_MODE);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_timer_shutdown(struct clock_event_device *ce)
>> +{
>> + struct timer_of *to = to_timer_of(ce);
>> +
>> + sprd_timer_disable(timer_of_base(to));
>> + return 0;
>> +}
>> +
>> +static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
>> +{
>> + struct clock_event_device *ce = (struct clock_event_device *)dev_id;
>> + struct timer_of *to = to_timer_of(ce);
>> +
>> + sprd_timer_clear_interrupt(timer_of_base(to));
>> +
>> + if (clockevent_state_oneshot(ce))
>> + sprd_timer_disable(timer_of_base(to));
>> +
>> + ce->event_handler(ce);
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static struct timer_of to = {
>> + .flags = TIMER_OF_IRQ | TIMER_OF_BASE,
>
> Why not the TIMER_OF_CLOCK ?

The timer's clock is fixed to 32.768K and no need to divide the
frequency, so our clock tree does not supply the timer's clock now.

>> +
>> + .clkevt = {
>> + .name = TIMER_NAME,
>> + .rating = 300,
>> + .features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
>> + CLOCK_EVT_FEAT_ONESHOT,
>> + .set_state_shutdown = sprd_timer_shutdown,
>> + .set_state_periodic = sprd_timer_set_periodic,
>> + .set_next_event = sprd_timer_set_next_event,
>> + .cpumask = cpu_possible_mask,
>> + },
>> +
>> + .of_irq = {
>> + .handler = sprd_timer_interrupt,
>> + .flags = IRQF_TIMER | IRQF_IRQPOLL,
>> + },
>> +};
>> +
>> +static int __init sprd_timer_init(struct device_node *np)
>> +{
>> + int ret;
>> + u32 freq;
>> +
>> + ret = timer_of_init(np, &to);
>> + if (ret)
>> + return ret;
>> +
>> + ret = of_property_read_u32(np, "clock-frequency", &freq);
>> + if (ret) {
>> + pr_err("failed to get clock frequency\n");
>> + timer_of_cleanup(&to);
>> + return ret;
>> + }
>> +
>> + to.of_clk.period = DIV_ROUND_UP(freq, HZ);
>> +
>> + sprd_timer_enable_interrupt(timer_of_base(&to));
>> + clockevents_config_and_register(&to.clkevt, freq, 1, UINT_MAX);
>> +
>> + return 0;
>> +}
>> +
>> +TIMER_OF_DECLARE(sc9860_timer, "sprd,sc9860-timer", sprd_timer_init);
>>

--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2017-12-08 09:21    [W:0.331 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site