lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 1/6] dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
Date
Add variable for checking channel idle state to ensure that dma
descriptor is not submitted when dmaengine is in progress.

This will avoid the polling for a bit in the status register to know
dma state in the driver hot path.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes for v7:
---> None.
Changes for v6:
---> Updated commit message as suggested by Vinod.
---> Added Channel idle variable description in the driver
as suggested by Vinod.
Changes for v5:
---> None.
Changes for v4:
---> None.
Changes for v3:
---> None.
Changes for v2:
---> Add idle check in the reset as suggested by Jose Abreu
---> Removed xilinx_dma_is_running/xilinx_dma_is_idle checks
in the driver and used common idle checks across the driver
as suggested by Laurent Pinchart.

drivers/dma/xilinx/xilinx_dma.c | 60 +++++++++++++++--------------------------
1 file changed, 22 insertions(+), 38 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 5eef133..c246563 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -321,6 +321,7 @@ struct xilinx_dma_tx_descriptor {
* @cyclic: Check for cyclic transfers.
* @genlock: Support genlock mode
* @err: Channel has errors
+ * @idle: Check for channel idle
* @tasklet: Cleanup work after irq
* @config: Device configuration info
* @flush_on_fsync: Flush on Frame sync
@@ -352,6 +353,7 @@ struct xilinx_dma_chan {
bool cyclic;
bool genlock;
bool err;
+ bool idle;
struct tasklet_struct tasklet;
struct xilinx_vdma_config config;
bool flush_on_fsync;
@@ -936,32 +938,6 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
}

/**
- * xilinx_dma_is_running - Check if DMA channel is running
- * @chan: Driver specific DMA channel
- *
- * Return: '1' if running, '0' if not.
- */
-static bool xilinx_dma_is_running(struct xilinx_dma_chan *chan)
-{
- return !(dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
- XILINX_DMA_DMASR_HALTED) &&
- (dma_ctrl_read(chan, XILINX_DMA_REG_DMACR) &
- XILINX_DMA_DMACR_RUNSTOP);
-}
-
-/**
- * xilinx_dma_is_idle - Check if DMA channel is idle
- * @chan: Driver specific DMA channel
- *
- * Return: '1' if idle, '0' if not.
- */
-static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
-{
- return dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
- XILINX_DMA_DMASR_IDLE;
-}
-
-/**
* xilinx_dma_stop_transfer - Halt DMA channel
* @chan: Driver specific DMA channel
*/
@@ -1029,6 +1005,9 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->err)
return;

+ if (!chan->idle)
+ return;
+
if (list_empty(&chan->pending_list))
return;

@@ -1040,13 +1019,6 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
tail_segment = list_last_entry(&tail_desc->segments,
struct xilinx_vdma_tx_segment, node);

- /* If it is SG mode and hardware is busy, cannot submit */
- if (chan->has_sg && xilinx_dma_is_running(chan) &&
- !xilinx_dma_is_idle(chan)) {
- dev_dbg(chan->dev, "DMA controller still busy\n");
- return;
- }
-
/*
* If hardware is idle, then all descriptors on the running lists are
* done, start new transfers
@@ -1143,6 +1115,8 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
list_splice_tail_init(&chan->pending_list, &chan->active_list);
chan->desc_pendingcount = 0;
}
+
+ chan->idle = false;
}

/**
@@ -1158,6 +1132,9 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->err)
return;

+ if (!chan->idle)
+ return;
+
if (list_empty(&chan->pending_list))
return;

@@ -1203,6 +1180,7 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)

list_splice_tail_init(&chan->pending_list, &chan->active_list);
chan->desc_pendingcount = 0;
+ chan->idle = false;
}

/**
@@ -1221,12 +1199,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
if (list_empty(&chan->pending_list))
return;

- /* If it is SG mode and hardware is busy, cannot submit */
- if (chan->has_sg && xilinx_dma_is_running(chan) &&
- !xilinx_dma_is_idle(chan)) {
- dev_dbg(chan->dev, "DMA controller still busy\n");
+ if (!chan->idle)
return;
- }

head_desc = list_first_entry(&chan->pending_list,
struct xilinx_dma_tx_descriptor, node);
@@ -1324,6 +1298,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)

list_splice_tail_init(&chan->pending_list, &chan->active_list);
chan->desc_pendingcount = 0;
+ chan->idle = false;
}

/**
@@ -1388,6 +1363,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
}

chan->err = false;
+ chan->idle = true;

return err;
}
@@ -1469,6 +1445,7 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
spin_lock(&chan->lock);
xilinx_dma_complete_descriptor(chan);
+ chan->idle = true;
chan->start_transfer(chan);
spin_unlock(&chan->lock);
}
@@ -2029,6 +2006,7 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)

/* Remove and free all of the descriptors in the lists */
xilinx_dma_free_descriptors(chan);
+ chan->idle = true;

if (chan->cyclic) {
reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
@@ -2344,6 +2322,12 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->has_sg = xdev->has_sg;
chan->desc_pendingcount = 0x0;
chan->ext_addr = xdev->ext_addr;
+ /* This variable enusres that descripotrs are not
+ * Submited when dma engine is in progress. This variable is
+ * Added to avoid pollling for a bit in the status register to
+ * Know dma state in the driver hot path.
+ */
+ chan->idle = true;

spin_lock_init(&chan->lock);
INIT_LIST_HEAD(&chan->pending_list);
--
2.7.4
\
 
 \ /
  Last update: 2017-12-07 06:37    [W:0.101 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site