lkml.org 
[lkml]   [2017]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 8/9] pinctrl: axp209: add support for AXP813 GPIOs
Date
The AXP813 has only two GPIOs. GPIO0 can either be used as a GPIO, an
LDO regulator or an ADC. GPIO1 can be used either as a GPIO or an LDO
regulator.

Moreover, the status bit of the GPIOs when in input mode is not offset
by 4 unlike the AXP209.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/gpio/gpio-axp209.txt | 13 +++++++-
drivers/pinctrl/pinctrl-axp209.c | 35 +++++++++++++++++-----
2 files changed, 39 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
index 0d77597c3f92..fc42b2caa06d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
@@ -9,7 +9,9 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
This driver employs the per-pin muxing pattern.

Required properties:
-- compatible: Should be "x-powers,axp209-gpio"
+- compatible: Should be one of:
+ - "x-powers,axp209-gpio"
+ - "x-powers,axp813-gpio"
- #gpio-cells: Should be two. The first cell is the pin number and the
second is the GPIO flags.
- gpio-controller: Marks the device node as a GPIO controller.
@@ -57,8 +59,17 @@ GPIOs and their functions
Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
not force GPIO1 and GPIO2 to be in gpio_in function as well).

+axp209
+------
GPIO | Functions
------------------------
GPIO0 | gpio_in, gpio_out, ldo, adc
GPIO1 | gpio_in, gpio_out, ldo, adc
GPIO2 | gpio_in, gpio_out
+
+axp813
+------
+GPIO | Functions
+------------------------
+GPIO0 | gpio_in, gpio_out, ldo, adc
+GPIO1 | gpio_in, gpio_out, ldo
diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index 9bb8722ba90f..22d3bb0bf927 100644
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -19,6 +19,7 @@
#include <linux/mfd/axp20x.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
@@ -41,6 +42,8 @@
#define AXP20X_MUX_GPIO_IN BIT(1)
#define AXP20X_MUX_ADC BIT(2)

+#define AXP813_MUX_ADC (BIT(2) | BIT(0))
+
struct axp20x_pctrl_desc {
const struct pinctrl_pin_desc *pins;
unsigned int npins;
@@ -74,6 +77,11 @@ static const struct pinctrl_pin_desc axp209_pins[] = {
PINCTRL_PIN(2, "GPIO2"),
};

+static const struct pinctrl_pin_desc axp813_pins[] = {
+ PINCTRL_PIN(0, "GPIO0"),
+ PINCTRL_PIN(1, "GPIO1"),
+};
+
static const struct axp20x_pctrl_desc axp20x_data = {
.pins = axp209_pins,
.npins = ARRAY_SIZE(axp209_pins),
@@ -83,6 +91,15 @@ static const struct axp20x_pctrl_desc axp20x_data = {
.adc_mux = AXP20X_MUX_ADC,
};

+static const struct axp20x_pctrl_desc axp813_data = {
+ .pins = axp813_pins,
+ .npins = ARRAY_SIZE(axp813_pins),
+ .ldo_mask = BIT(0) | BIT(1),
+ .adc_mask = BIT(0),
+ .gpio_status_offset = 0,
+ .adc_mux = AXP813_MUX_ADC,
+};
+
static int axp20x_gpio_get_reg(unsigned int offset)
{
switch (offset) {
@@ -357,10 +374,18 @@ static void axp20x_build_funcs_groups(struct platform_device *pdev)
pctl->desc->pins);
}

+static const struct of_device_id axp20x_pctl_match[] = {
+ { .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, },
+ { .compatible = "x-powers,axp813-gpio", .data = &axp813_data, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, axp20x_pctl_match);
+
static int axp20x_pctl_probe(struct platform_device *pdev)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct axp20x_pctl *pctl;
+ struct device *dev = &pdev->dev;
struct pinctrl_desc *pctrl_desc;
int ret;

@@ -388,9 +413,9 @@ static int axp20x_pctl_probe(struct platform_device *pdev)
pctl->chip.set = axp20x_gpio_set;
pctl->chip.direction_input = axp20x_gpio_input;
pctl->chip.direction_output = axp20x_gpio_output;
- pctl->chip.ngpio = 3;
+ pctl->chip.ngpio = pctl->desc->npins;

- pctl->desc = &axp20x_data;
+ pctl->desc = (struct axp20x_pctrl_desc *)of_device_get_match_data(dev);
pctl->regmap = axp20x->regmap;
pctl->dev = &pdev->dev;

@@ -435,12 +460,6 @@ static int axp20x_pctl_probe(struct platform_device *pdev)
return 0;
}

-static const struct of_device_id axp20x_pctl_match[] = {
- { .compatible = "x-powers,axp209-gpio" },
- { }
-};
-MODULE_DEVICE_TABLE(of, axp20x_pctl_match);
-
static struct platform_driver axp20x_pctl_driver = {
.probe = axp20x_pctl_probe,
.driver = {
--
2.14.1
\
 
 \ /
  Last update: 2017-12-05 15:50    [W:0.334 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site