lkml.org 
[lkml]   [2017]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] leds: lp8860: Various fixes to align with LED framework
Date
Update the driver to conform with the LED framework.
Use devm_led_classdev_register
Destroy mutex on exit
Remove dependency on CONFIG_OF in the driver and move
to the Kconfig
Update the MODULE_LICENSE to GPL v2
Remove setting of MAX brightness as the LED framework
does this.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/leds/Kconfig | 2 +-
drivers/leds/leds-lp8860.c | 13 +++++--------
2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 318a28fd58fe..ac4d9d8bf96b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -347,7 +347,7 @@ config LEDS_LP8788

config LEDS_LP8860
tristate "LED support for the TI LP8860 4 channel LED driver"
- depends on LEDS_CLASS && I2C
+ depends on LEDS_CLASS && I2C && OF
select REGMAP_I2C
help
If you say yes here you get support for the TI LP8860 4 channel
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
index 4fed603ee728..e94041e0e693 100644
--- a/drivers/leds/leds-lp8860.c
+++ b/drivers/leds/leds-lp8860.c
@@ -399,7 +399,6 @@ static int lp8860_probe(struct i2c_client *client,

led->client = client;
led->led_dev.name = led->label;
- led->led_dev.max_brightness = LED_FULL;
led->led_dev.brightness_set_blocking = lp8860_brightness_set;

mutex_init(&led->lock);
@@ -426,7 +425,7 @@ static int lp8860_probe(struct i2c_client *client,
if (ret)
return ret;

- ret = led_classdev_register(&client->dev, &led->led_dev);
+ ret = devm_led_classdev_register(&client->dev, &led->led_dev);
if (ret) {
dev_err(&client->dev, "led register err: %d\n", ret);
return ret;
@@ -440,8 +439,6 @@ static int lp8860_remove(struct i2c_client *client)
struct lp8860_led *led = i2c_get_clientdata(client);
int ret;

- led_classdev_unregister(&led->led_dev);
-
if (led->enable_gpio)
gpiod_direction_output(led->enable_gpio, 0);

@@ -452,6 +449,8 @@ static int lp8860_remove(struct i2c_client *client)
"Failed to disable regulator\n");
}

+ mutex_destroy(&led->lock);
+
return 0;
}

@@ -461,18 +460,16 @@ static const struct i2c_device_id lp8860_id[] = {
};
MODULE_DEVICE_TABLE(i2c, lp8860_id);

-#ifdef CONFIG_OF
static const struct of_device_id of_lp8860_leds_match[] = {
{ .compatible = "ti,lp8860", },
{},
};
MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
-#endif

static struct i2c_driver lp8860_driver = {
.driver = {
.name = "lp8860",
- .of_match_table = of_match_ptr(of_lp8860_leds_match),
+ .of_match_table = of_lp8860_leds_match,
},
.probe = lp8860_probe,
.remove = lp8860_remove,
@@ -482,4 +479,4 @@ module_i2c_driver(lp8860_driver);

MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
--
2.15.0.124.g7668cbc60
\
 
 \ /
  Last update: 2017-12-04 22:22    [W:0.039 / U:2.232 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site