lkml.org 
[lkml]   [2017]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 3/3] x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
The preempt_disable/enable() pair in __native_flush_tlb() was added in
commit 5cf0791da5c1 ("x86/mm: Disable preemption during CR3 read+write") to
protect the UP variant of flush_tlb_mm_range().

That preempt_disable/enable() pair should have been added to the UP variant
of flush_tlb_mm_range() instead.

The UP variant was removed with commit ce4a4e565f52 ("x86/mm: Remove the UP
asm/tlbflush.h code, always use the (formerly) SMP code"), but the
preempt_disable/enable() pair stayed around.

The latest change to __native_flush_tlb() in commit 6fd166aae78c ("x86/mm:
Use/Fix PCID to optimize user/kernel switches") added an access to a per
cpu variable outside the preempt disabled regions which makes no sense at
all. __native_flush_tlb() must always be called with at least preemption
disabled.

Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch
bad callers independent of the smp_processor_id() debugging.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/tlbflush.h | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -345,15 +345,17 @@ static inline void invalidate_user_asid(
*/
static inline void __native_flush_tlb(void)
{
- invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
/*
- * If current->mm == NULL then we borrow a mm which may change
- * during a task switch and therefore we must not be preempted
- * while we write CR3 back:
+ * Preemption or interrupts must be disabled to protect the access
+ * to the per cpu variable and to prevent being preempted between
+ * read_cr3() and write_cr3().
*/
- preempt_disable();
+ WARN_ON_ONCE(preemptible());
+
+ invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+
+ /* If current->mm == NULL then the read_cr3() "borrows" a mm */
native_write_cr3(__native_read_cr3());
- preempt_enable();
}

/*

\
 
 \ /
  Last update: 2017-12-30 22:23    [W:0.055 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site