lkml.org 
[lkml]   [2017]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/11] ARM: dts: sun8i: a83t: Add HDMI display pipeline
Date
This commit adds all bits necessary for HDMI on A83T - mixer1, tcon1,
hdmi and hdmi pinctrl entries.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 108 +++++++++++++++++++++++++++++++++++++-
1 file changed, 107 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 7f4955a5fab7..601d1eb5460e 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -155,7 +155,7 @@

de: display-engine {
compatible = "allwinner,sun8i-a83t-display-engine";
- allwinner,pipelines = <&mixer0>;
+ allwinner,pipelines = <&mixer0>, <&mixer1>;
status = "disabled";
};

@@ -208,6 +208,32 @@
};
};

+ mixer1: mixer@1200000 {
+ compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+ reg = <0x01200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_WB>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mixer1_out_tcon1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_in_mixer1>;
+ };
+ };
+ };
+ };
+
syscon: syscon@1c00000 {
compatible = "allwinner,sun8i-a83t-system-controller",
"syscon";
@@ -256,6 +282,43 @@
};
};

+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun8i-a83t-tcon-tv";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON1>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_mixer1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ };
+ };
+ };
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-a83t-mmc",
"allwinner,sun7i-a20-mmc";
@@ -427,6 +490,11 @@
drive-strength = <40>;
};

+ hdmi_pins: hdmi-pins {
+ pins = "PH6", "PH7", "PH8";
+ function = "hdmi";
+ };
+
i2c0_pins: i2c0-pins {
pins = "PH0", "PH1";
function = "i2c0";
@@ -685,6 +753,44 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};

+ hdmi: hdmi@1ee0000 {
+ compatible = "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>,
+ <0x01ef0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>;
+ reset-names = "phy", "ctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun8i-a83t-r-intc",
"allwinner,sun6i-a31-r-intc";
--
2.15.1
\
 
 \ /
  Last update: 2017-12-30 22:04    [W:0.263 / U:0.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site