lkml.org 
[lkml]   [2017]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 4.14.9 doesn't boot (regression)
On Sat, Dec 30, 2017 at 11:45:13AM +0300, Alexander Tsoy wrote:
> В Пт, 29/12/2017 в 21:49 -0600, Josh Poimboeuf пишет:
> > On Fri, Dec 29, 2017 at 05:10:35PM -0700, Andy Lutomirski wrote:
> > > (Also, Josh, the oops code should have printed the contents of the
> > > struct pt_regs at the top of the DF stack.  Any idea why it
> > > didn't?)
> >
> > Looking at one of the dumps:
> >
> >   [  392.774879] NMI backtrace for cpu 0
> >   [  392.774881] CPU: 0 PID: 1 Comm: init Not tainted 4.14.9-gentoo
> > #1
> >   [  392.774881] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
> >   [  392.774882] task: ffff8802368b8000 task.stack: ffffc9000000c000
> >   [  392.774885] RIP: 0010:double_fault+0x0/0x30
> >   [  392.774886] RSP: 0000:ffffffffff527fd0 EFLAGS: 00000086
> >   [  392.774887] RAX: 000000003fc00000 RBX: 0000000000000001 RCX:
> > 00000000c0000101
> >   [  392.774887] RDX: 00000000ffff8802 RSI: 0000000000000000 RDI:
> > ffffffffff527f58
> >   [  392.774887] RBP: 0000000000000000 R08: 0000000000000000 R09:
> > 0000000000000000
> >   [  392.774888] R10: 0000000000000000 R11: 0000000000000000 R12:
> > ffffffff816ae726
> >   [  392.774888] R13: 0000000000000000 R14: 0000000000000000 R15:
> > 0000000000000000
> >   [  392.774889] FS:  0000000000000000(0000)
> > GS:ffff88023fc00000(0000) knlGS:0000000000000000
> >   [  392.774889] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >   [  392.774890] CR2: ffffffffff526f08 CR3: 0000000235b48002 CR4:
> > 00000000001606f0
> >   [  392.774892] Call Trace:
> >   [  392.774894]  <#DF>
> >   [  392.774897]  do_double_fault+0xb/0x140
> >   [  392.774898]  </#DF>
> >
> > It should have at least printed the #DF iret frame registers, which I
> > recently added support for in "x86/unwinder: Handle stack overflows
> > more
> > gracefully", which is in both 4.14.9 and 4.15-rc5.
> >
> > I think the missing iret regs are due to a bug in
> > show_trace_log_lvl(),
> > where if the unwind starts with two regs frames in a row, the second
> > regs don't get printed.
> >
> > Alexander, would you mind reproducing again with the below patch?  It
> > should still fail, but this time it should hopefully show another
> > RIP/RSP/EFLAGS instead of the "do_double_fault+0xb/0x140" line.
> >
>
> Yes, it works:
>
> [   23.058064] NMI backtrace for cpu 2
> [   23.058068] CPU: 2 PID: 1 Comm: init Not tainted 4.15.0-rc5+ #1
> [   23.058069] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> BIOS 1.10.2-1.fc27 04/01/2014
> [   23.058074] RIP: 0010:double_fault+0x0/0x30
> [   23.058075] RSP: 0000:fffffe800005ffd0 EFLAGS: 00000086
> [   23.058077] RAX: 000000003fd00000 RBX: 0000000000000001 RCX:
> 00000000c0000101
> [   23.058077] RDX: 00000000ffff9681 RSI: 0000000000000000 RDI:
> fffffe800005ff58
> [   23.058078] RBP: 0000000000000000 R08: 0000000000000000 R09:
> 0000000000000000
> [   23.058079] R10: 0000000000000000 R11: 0000000000000000 R12:
> ffffffff92001426
> [   23.058080] R13: 0000000000000000 R14: 0000000000000000 R15:
> 0000000000000000
> [   23.058083] FS:  0000000000000000(0000) GS:ffff96813fd00000(0000)
> knlGS:0000000000000000
> [   23.058084] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   23.058085] CR2: fffffe800005ef08 CR3: 0000000137a09000 CR4:
> 00000000000406a0
> [   23.058089] Call Trace:
> [   23.058101]  <#DF>
> [   23.058104] RIP: 0010:do_double_fault+0xb/0x140
> [   23.058105] RSP: 0000:fffffe800005ef18 EFLAGS: 00010086 ORIG_RAX:
> 0000000000000000
> [   23.058106] RAX: 000000003fd00000 RBX: 0000000000000001 RCX:
> 00000000c0000101
> [   23.058107] RDX: 00000000ffff9681 RSI: 0000000000000000 RDI:
> fffffe800005ff58
> [   23.058107] RBP: 0000000000000000 R08: 0000000000000000 R09:
> 0000000000000000
> [   23.058108] R10: 0000000000000000 R11: 0000000000000000 R12:
> ffffffff92001426
> [   23.058108] R13: 0000000000000000 R14: 0000000000000000 R15:
> 0000000000000000
> [   23.058111]  </#DF>
> [   23.058111] Code: 05 00 00 48 89 e7 31 f6 e8 2e 8c 61 ff e9 69 06 00
> 00 e8 94 05 00 00 48 89 e7 31 f6 e8 1a 8c 61 ff e9 55 06 00 00 0f 1f 44
> 00 00 <0f> 1f 00 48 83 c4 88 e8 e4 04 00 00 48 89 e7 48 8b 74 24 78 48

That's better indeed, though still not quite right. It should have only
shown a subset of those registers. One more bug to fix there...

--
Josh

\
 
 \ /
  Last update: 2017-12-30 18:10    [W:0.079 / U:5.480 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site