[lkml]   [2017]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [RFC PATCH v11 4/5] PCI / PM: Add support for the PCIe WAKE# signal for OF
* Rafael J. Wysocki <> [171228 17:46]:
> To be precise, it is not quite possible to figure out which WAKE#
> triggered, if they are sharing the line, without looking into the
> config spaces of the devices below the switch. The switch is not
> expected to do that AFAICS. It only generates a PME message meaning
> "wakeup is being signaled somewhere below" and the PME driver that
> handles the Root Port receiving it should look at the PME Status bits
> of the devices below the switch (the pme.c driver does that IIRC or at
> least it should do that ;-)).
> Still, the handling of WAKE# doesn't need to cover this case AFAICS.

OK makes sense now.



 \ /
  Last update: 2017-12-29 18:17    [W:0.099 / U:1.452 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site