lkml.org 
[lkml]   [2017]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface
On Wed, Dec 27, 2017 at 11:14:45PM +0100, Antoine Tenart wrote:
> This patch enables the fourth network interface on the Marvell
> Macchiatobin. It is configured in the 2500Base-X PHY mode.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index b3350827ee55..c51efd511324 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -279,6 +279,14 @@
> phys = <&cps_comphy0 1>;
> };
>
> +&cps_eth2 {
> + /* CPS Lane 5 */
> + status = "okay";
> + phy-mode = "2500base-x";
> + /* Generic PHY, providing serdes lanes */
> + phys = <&cps_comphy5 2>;
> +};
> +

This is wrong. This lane is connected to a SFP cage which can support
more than just 2500base-X. Tying it in this way to 2500base-X means
that this port does not support conenctions at 1000base-X, despite
that's one of the most popular and more standardised speeds.

So, I feel I have to NAK this patch in its current form.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

\
 
 \ /
  Last update: 2017-12-27 23:25    [W:0.095 / U:8.860 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site