lkml.org 
[lkml]   [2017]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH v4 0/2] Initial Allwinner V3s CSI Support
Hi,

On Fri, 22 Dec 2017 14:46:48 +0100
Ondřej Jirman <megous@megous.com> wrote:

> Hello,
>
> Yong Deng píše v Pá 22. 12. 2017 v 17:32 +0800:
> > This patchset add initial support for Allwinner V3s CSI.
> >
> > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> > and CSI1 is used for parallel interface. This is not documented in
> > datasheet but by testing and guess.
> >
> > This patchset implement a v4l2 framework driver and add a binding
> > documentation for it.
> >
> > Currently, the driver only support the parallel interface. And has been
> > tested with a BT1120 signal which generating from FPGA. The following
> > fetures are not support with this patchset:
> > - ISP
> > - MIPI-CSI2
> > - Master clock for camera sensor
> > - Power regulator for the front end IC
> >
> > Thanks for Ondřej Jirman's help.
> >
> > Changes in v4:
> > * Deal with the CSI 'INNER QUEUE'.
> > CSI will lookup the next dma buffer for next frame before the
> > the current frame done IRQ triggered. This is not documented
> > but reported by Ondřej Jirman.
> > The BSP code has workaround for this too. It skip to mark the
> > first buffer as frame done for VB2 and pass the second buffer
> > to CSI in the first frame done ISR call. Then in second frame
> > done ISR call, it mark the first buffer as frame done for VB2
> > and pass the third buffer to CSI. And so on. The bad thing is
> > that the first buffer will be written twice and the first frame
> > is dropped even the queued buffer is sufficient.
> > So, I make some improvement here. Pass the next buffer to CSI
> > just follow starting the CSI. In this case, the first frame
> > will be stored in first buffer, second frame in second buffer.
> > This mothed is used to avoid dropping the first frame, it
> > would also drop frame when lacking of queued buffer.
> > * Fix: using a wrong mbus_code when getting the supported formats
> > * Change all fourcc to pixformat
> > * Change some function names
> >
> > Changes in v3:
> > * Get rid of struct sun6i_csi_ops
> > * Move sun6i-csi to new directory drivers/media/platform/sunxi
> > * Merge sun6i_csi.c and sun6i_csi_v3s.c into sun6i_csi.c
> > * Use generic fwnode endpoints parser
> > * Only support a single subdev to make things simple
> > * Many complaintion fix
> >
> > Changes in v2:
> > * Change sunxi-csi to sun6i-csi
> > * Rebase to media_tree master branch
> >
> > Following is the 'v4l2-compliance -s -f' output, I have test this
> > with both interlaced and progressive signal:
> >
> > # ./v4l2-compliance -s -f
> > v4l2-compliance SHA : 6049ea8bd64f9d78ef87ef0c2b3dc9b5de1ca4a1
> >
> > Driver Info:
> > Driver name : sun6i-video
> > Card type : sun6i-csi
> > Bus info : platform:csi
> > Driver version: 4.15.0
> > Capabilities : 0x84200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> >
> > Compliance test for device /dev/video0 (not using libv4l2):
> >
> > Required ioctls:
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second video open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK (Not Supported)
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 1 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Test input 0:
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> > test VIDIOC_QUERYCTRL: OK (Not Supported)
> > test VIDIOC_G/S_CTRL: OK (Not Supported)
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 0 Private Controls: 0
>
> I'm not sure if your driver passes control queries to the subdev. It
> did not originally, and I'm not sure you picked up the change from my
> version of the driver. "Not supported" here seems to indicate that it
> does not.
>
> I'd be interested what's the recommended practice here. It sure helps
> with some apps that expect to be able to modify various input controls
> directly on the /dev/video# device. These are then supported out of the
> box.
>
> It's a one-line change. See:
>
> https://www.kernel.org/doc/html/latest/media/kapi/v4l2-controls.html#in
> heriting-controls

I think this is a feature and not affect the driver's main function.
I just focused on making the CSI main function to work properly in
the initial version. Is this feature mandatory or most commonly used?

>
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > test VIDIOC_EXPBUF: OK
> >
> > Test input 0:
> >
> > Streaming ioctls:
> > test read/write: OK (Not Supported)
> > test MMAP: OK
> > test USERPTR: OK (Not Supported)
> > test DMABUF: Cannot test, specify --expbuf-device
> >
> > Stream using all formats:
> > test MMAP for Format HM12, Frame Size 1280x720:
> > Stride 1920, Field None: OK
> > test MMAP for Format NV12, Frame Size 1280x720:
> > Stride 1920, Field None: OK
> > test MMAP for Format NV21, Frame Size 1280x720:
> > Stride 1920, Field None: OK
> > test MMAP for Format YU12, Frame Size 1280x720:
> > Stride 1920, Field None: OK
> > test MMAP for Format YV12, Frame Size 1280x720:
> > Stride 1920, Field None: OK
> > test MMAP for Format NV16, Frame Size 1280x720:
> > Stride 2560, Field None: OK
> > test MMAP for Format NV61, Frame Size 1280x720:
> > Stride 2560, Field None: OK
> > test MMAP for Format 422P, Frame Size 1280x720:
> > Stride 2560, Field None: OK
> >
> > Total: 54, Succeeded: 54, Failed: 0, Warnings: 0
> >
> > Yong Deng (2):
> > dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)
> > media: V3s: Add support for Allwinner CSI.
> >
> > .../devicetree/bindings/media/sun6i-csi.txt | 51 ++
> > MAINTAINERS | 8 +
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 2 +
> > drivers/media/platform/sunxi/sun6i-csi/Kconfig | 9 +
> > drivers/media/platform/sunxi/sun6i-csi/Makefile | 3 +
> > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 878 +++++++++++++++++++++
> > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 147 ++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h | 203 +++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_video.c | 752 ++++++++++++++++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_video.h | 60 ++
> > 11 files changed, 2114 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Kconfig
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Makefile
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.h
> >
> > --
> > 1.8.3.1
> >


Thanks,
Yong

\
 
 \ /
  Last update: 2017-12-25 04:16    [W:0.073 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site