lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ASOC: wm8960: Add multiple MCLK frequency support
On Tue, Dec 19, 2017 at 02:19:48PM +0800, chen liu wrote:
> 2017-12-18 19:55 GMT+08:00 Charles Keepax <ckeepax@opensource.cirrus.com>:
> > On Mon, Dec 18, 2017 at 07:32:41PM +0800, chen liu wrote:
> > > 2017-12-18 17:31 GMT+08:00 Charles Keepax <ckeepax@opensource.cirrus.com
> > > > On Fri, Dec 15, 2017 at 09:07:15PM +0800, chen liu wrote:
> > > > > 2017-12-15 0:19 GMT+08:00 Charles Keepax <
> > ckeepax@opensource.cirrus.com
> > > > > > On Wed, Dec 13, 2017 at 08:37:30PM +0800, Chen.Liu wrote:
> // Then this branch will be executed.
> // If the sample rate is 44100HZ, the value of freq_out will be
> 11.2896MHZ
> freq_out = wm8960_configure_pll(codec, freq_in, &i, &j, &k);
> if (freq_out < 0) {
> dev_err(codec->dev, "failed to configure clock via PLL\n");
> return freq_out;
> }
> // The 'wm8960_set_pll' function will be executed,this function is
> very important.
> // But now, the freq_in is 24MHZ and the freq_out is 11.2896MHZ.
> wm8960_set_pll(codec, freq_in, freq_out);
> ...
>
> Because the 'wm8960_configure_pll' function has been pre-scaled by 2 for
> freq_out,
> but the value of freq_out is not multiplied by 2 in the 'pll_factors'
> function, it prints the
> "WM8960 PLL: Unsupported N =" error message.

Ah ok so I hadn't realised you were using the SYSCLK_AUTO stuff
and finding an issue with it. Thank you very much for the
explanation.

One thing I don't understand though is it looks like the freq_out
returned from wm8960_configure_pll should already be taking the
SYSCLK_DIV into account:

for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
sysclk = lrclk * dac_divs[j];
freq_out = sysclk * sysclk_divs[i];

So if lrclk=44100, j=0, i=2 which I believe is the case in
question we should get:

sysclk = 44100 * 256 = 11.2896MHz
freq_out = 11.2896MHz * 2 = 22.5792MHz

So when wm8960_configure_pll returns i=2 then it should also be
setting freq_out as 22.5792MHz. So you final call there to
wm8960_set_pll should be:

wm8960_set_pll(codec, 24MHz, 22.5792MHz);

Can you see why that isn't happening?

Thanks,
Charles

\
 
 \ /
  Last update: 2017-12-21 17:49    [W:0.074 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site