lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/11] fs: add frozen sb state helpers
Hello,

I think I owe you a reply here... Sorry that it took so long.

On Fri 01-12-17 22:13:27, Luis R. Rodriguez wrote:
> On Fri, Dec 01, 2017 at 12:47:24PM +0100, Jan Kara wrote:
> > On Thu 30-11-17 20:05:48, Luis R. Rodriguez wrote:
> > > > In fact, what might be a cleaner solution is to introduce a 'freeze_count'
> > > > for superblock freezing (we already do have this for block devices). Then
> > > > you don't need to differentiate these two cases - but you'd still need to
> > > > properly handle cleanup if freezing of all superblocks fails in the middle.
> > > > So I'm not 100% this works out nicely in the end. But it's certainly worth
> > > > a consideration.
> > >
> > > Ah, there are three important reasons for doing it the way I did it which are
> > > easy to miss, unless you read the commit log message very carefully.
> > >
> > > 0) The ioctl interface causes a failure to be sent back to userspace if
> > > you issue two consecutive freezes, or two thaws. Ie, once a filesystem is
> > > frozen, a secondary call will result in an error. Likewise for thaw.
> >
> > Yep. But also note that there's *another* interface to filesystem freezing
> > which behaves differently - freeze_bdev() (used internally by dm). That
> > interface uses the counter and freezing of already frozen device succeeds.
>
> Ah... so freeze_bdev() semantics matches the same semantics I was looking
> for.
>
> > IOW it is a mess.
>
> To say the least.
>
> > We cannot change the behavior of the ioctl but we could
> > still provide an in-kernel interface to freeze_super() with the same
> > semantics as freeze_bdev() which might be easier to use by suspend - maybe
> > we could call it 'exclusive' (for the current freeze_super() semantics) and
> > 'non-exclusive' (for the freeze_bdev() semantics) since this is very much
> > like O_EXCL open of block devices...
>
> Sure, now typically I see we make exclusive calls with the postfix _excl() so
> I take it you'd be OK in renaming freeze_super() freeze_super_excl() eventually
> then?

In principle yes but let's leave the naming disputes to a later time when
it is clear what API do we actually want to provide.

> I totally missed freeze_bdev() otherwise I think I would have picked up on the
> shared semantics stuff and I would have just made a helper out of what
> freeze_bdev() uses, and then have both in-kernel and freeze_bdev() use it.
>
> I'll note that its still not perfectly clear if really the semantics behind
> freeze_bdev() match what I described above fully. That still needs to be
> vetted for. For instance, does thaw_bdev() keep a superblock frozen if we
> an ioctl initiated freeze had occurred before? If so then great. Otherwise
> I think we'll need to distinguish the ioctl interface. Worst possible case
> is that bdev semantics and in-kernel semantics differ somehow, then that
> will really create a holy fucking mess.

I believe nobody really thought about mixing those two interfaces to fs
freezing and so the behavior is basically defined by the implementation.
That is:

freeze_bdev() on sb frozen by ioctl_fsfreeze() -> EBUSY
freeze_bdev() on sb frozen by freeze_bdev() -> success
ioctl_fsfreeze() on sb frozen by freeze_bdev() -> EBUSY
ioctl_fsfreeze() on sb frozen by ioctl_fsfreeze() -> EBUSY

thaw_bdev() on sb frozen by ioctl_fsfreeze() -> EINVAL
ioctl_fsthaw() on sb frozen by freeze_bdev() -> success

What I propose is the following API:

freeze_super_excl()
- freezes superblock, returns EBUSY if the superblock is already frozen
(either by another freeze_super_excl() or by freeze_super())
freeze_super()
- this function will make sure superblock is frozen when the function
returns with success. It can be nested with other freeze_super() or
freeze_super_excl() calls (this second part is different from how
freeze_bdev() behaves currently but AFAICT this behavior is actually
what all current users of freeze_bdev() really want - just make sure
fs cannot be written to)
thaw_super()
- counterpart to freeze_super(), would fail with EINVAL if we were to
drop the last "freeze reference" but sb was actually frozen with
freeze_super_excl()
thaw_super_excl()
- counterpart to freeze_super_excl(). Fails with EINVAL if sb was not
frozen with freeze_super_excl() (this is different to current behavior
but I don't believe anyone relies on this and doing otherwise is asking
for data corruption).

I'd implement it by a freeze counter in the superblock (similar to what we
currently have in bdev) where every call to freeze_super() or
freeze_super_excl() would add one. Additionally we'd have a flag in the
superblock whether the first freeze (it could not be any other since those
would fail with EBUSY) came from freeze_super_excl().

Then we could make ioctl interface use the _excl() variant of the freezing
API, freeze_bdev() would use the non-exclusive variant (we could drop the
freeze counter in bdev completely), your freezing on suspend could then use
the non-exclusive variant as well.

Also when doing this, you'd need to move code like:

if (sb->s_op->freeze_super)
error = sb->s_op->freeze_super(sb);
else
error = freeze_super(sb);

into the freeze_super() / freeze_super_excl() handler behind the
freeze counting code which might be a bit tricky WRT locking. GFS2 is the
only fs having ->freeze_super() and that callback was implemented specifically
so that it can do its own (cluster wide) locking before generic code grabbing
s_umount semaphore. Then internally GFS2 ends up calling freeze_super()
from freeze_go_sync() when cluster lock is acquired.


> > 2) It is not that normal users + one special user (who owns the "flag" in
> > the superblock in form of a special freeze state) setup. We'd simply have
> > exclusive and non-exclusive users of superblock freezing and there can be
> > arbitrary numbers of them.
>
> Sorry I did not understand this point. Can you rephrase perhaps a bit?
>
> Anyway, I just tried implementing this and it seemed rather easy to
> use a pivot, however note that then freeze_processes() which calls
> fs_suspend_freeze() would somehow need to pass the failed sb... do
> we want to have let fs_suspend_freeze() pass a parameter to be set
> to the failed sb of it failed? Locking-wise this seems racy.

So with your iterate_supers_excl() doing this is somewhat difficult but you
could have something like:

int freeze_all_supers(void)
{
struct super_block *sb, *p = NULL;
int error = 0;

spin_lock(&sb_lock);
list_for_each_entry_reverse(sb, &super_blocks, s_list) {
if (hlist_unhashed(&sb->s_instances))
continue;
sb->s_count++;
spin_unlock(&sb_lock);

down_write(&sb->s_umount);
if (sb->s_root && (sb->s_flags & SB_BORN)) {
error = freeze_super(sb, arg);
if (error) {
up_write(&sb->s_umount);
spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
list_for_each_entry_continue(sb, &super_blocks,
s_list) {
if (hlist_unhashed(&sb->s_instances))
continue;
sb->s_count++;
spin_unlock(&sb_lock);

down_write(&sb->s_umount);
if (sb->s_root && (sb->s_flags & SB_BORN))
thaw_super(sb, arg);
up_write(&sb->s_umount);

spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
}
break;
}
}
up_write(&sb->s_umount);

spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
}
if (p)
__put_super(p);
spin_unlock(&sb_lock);

return error;
}

And you could possibly factor that out into two helper functions for
iterating the superblocks, just they'd need more parameters and you'd need
to pass reference (sb->count) when passing in the 'pivot' as you call it.

Honza
--
Jan Kara <jack@suse.com>
SUSE Labs, CR

\
 
 \ /
  Last update: 2017-12-21 12:04    [W:0.198 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site