lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 26/45] ARM: dts: at91: at91sam9x5: TC blocks are also simple-mfd and syscon devices
    Date
    Add simple-mfd and syscon to the TC blocks to allow to register one of the
    channels as clocksource properly at boot time and free up the remaining
    channels for other use.

    Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
    ---
    arch/arm/boot/dts/at91sam9x5.dtsi | 8 ++++++--
    1 file changed, 6 insertions(+), 2 deletions(-)

    diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
    index ad779a7dfefd..fee4fe51a97e 100644
    --- a/arch/arm/boot/dts/at91sam9x5.dtsi
    +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
    @@ -433,7 +433,9 @@
    };

    tcb0: timer@f8008000 {
    - compatible = "atmel,at91sam9x5-tcb";
    + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
    + #address-cells = <1>;
    + #size-cells = <0>;
    reg = <0xf8008000 0x100>;
    interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
    clocks = <&tcb0_clk>, <&clk32k>;
    @@ -441,7 +443,9 @@
    };

    tcb1: timer@f800c000 {
    - compatible = "atmel,at91sam9x5-tcb";
    + compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
    + #address-cells = <1>;
    + #size-cells = <0>;
    reg = <0xf800c000 0x100>;
    interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
    clocks = <&tcb0_clk>, <&clk32k>;
    --
    2.15.1
    \
     
     \ /
      Last update: 2017-12-19 22:42    [W:4.154 / U:0.236 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site