lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v5 1/4] phylib: Add device reset delay support
On Mon, Dec 18, 2017 at 1:30 AM, Richard Leitner
<richard.leitner@skidata.com> wrote:
> Hi Rob,
>
> On 12/15/2017 11:17 PM, Rob Herring wrote:
>> On Mon, Dec 11, 2017 at 01:16:57PM +0100, Richard Leitner wrote:
>>> From: Richard Leitner <richard.leitner@skidata.com>
>>>
>>> Some PHYs need a minimum time after the reset gpio was asserted and/or
>>> deasserted. To ensure we meet these timing requirements add two new
>>> optional devicetree parameters for the phy: reset-delay-us and
>>> reset-post-delay-us.
>>>
>>> Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
>>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>> ---
>>> Documentation/devicetree/bindings/net/phy.txt | 10 ++++++++++
>>> drivers/net/phy/mdio_device.c | 13 +++++++++++--
>>> drivers/of/of_mdio.c | 4 ++++
>>> include/linux/mdio.h | 2 ++
>>> 4 files changed, 27 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
>>> index c05479f5ac7c..72860ce7f610 100644
>>> --- a/Documentation/devicetree/bindings/net/phy.txt
>>> +++ b/Documentation/devicetree/bindings/net/phy.txt
>>> @@ -55,6 +55,12 @@ Optional Properties:
>>>
>>> - reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
>>>
>>> +- reset-delay-us: Delay after the reset was asserted in microseconds.
>>> + If this property is missing the delay will be skipped.
>>> +
>>> +- reset-post-delay-us: Delay after the reset was deasserted in microseconds.
>>> + If this property is missing the delay will be skipped.
>>
>> I think these names could be clearer as to exactly what they mean.
>> Looking at existing properties with "reset-delay" there's a mixture of
>> definitions whether it is the assert time or the time after deassert.
>>
>> So I'd call these "reset-assert-us" and "reset-deassert-us".
>
> Ok, that would be fine with me, but are you sure that we should omit the
> "-delay" term completely?

These are just minimum assertion and deassertion times. I think that's
clear enough.

> What would be the best approach to post this change (as the patchset was
> already merged to net-next)? A separate patch or a v6 of the complete
> patchset?

A patch on top of this.

Rob

\
 
 \ /
  Last update: 2017-12-19 18:13    [W:0.076 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site