lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] net: qcom/emac: Change the order of mac up and sgmii open
From
Date
On 12/17/2017 11:57 PM, Hemanth Puranik wrote:
> This patch fixes the order of mac_up and sgmii_open for the
> reasons noted below:
>
> - If open takes more time(if the SGMII block is not responding or
> if we want to do some delay based task) in this situation we
> will hit NETDEV watchdog
> - The main reason : We should signal to upper layers that we are
> ready to receive packets "only" when the entire path is initialized
> not the other way around, this is followed in the reset path where
> we do mac_down, sgmii_reset and mac_up. This also makes the driver
> uniform across the reset and open paths.
> - In the future there may be need for delay based tasks to be done in
> sgmii open which will result in NETDEV watchdog
> - As per the documentation the order of init should be sgmii, mac, rings
> and DMA
>
> Signed-off-by: Hemanth Puranik<hpuranik@codeaurora.org>

Acked-by: Timur Tabi <timur@codeaurora.org>

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2017-12-18 17:06    [W:0.036 / U:6.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site