lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/13] New driver to support OpenCAPI devices on POWER9
Date

This series adds support for Open Coherent Accelerator (ocxl) devices
on POWER9 processor. OpenCAPI is a consortium developing the
specifications for an interface between processors and accelerators,
allowing sharing the host memory with the accelerators, using virtual
addresses.

The OpenCAPI device can also have its own local memory and provide
access to the host, though it is not supported by that series.

The OpenCAPI specification is processor agnostic, but this series adds
support specifically for powerpc.

Even though the underlying transport is not PCI, the firmware
abstracts the hardware like a PCI host bridge and Linux sees the
OpenCAPI devices as PCI devices. So a lot of existing infrastructure
and commands can be reused.

Patches 1-5: add the platform-specific services needed by the driver
Patches 6-10: driver code
Patch 11: small correction to existing cxl driver
Patch 12: documentation

Current limitations, that will be addressed in later patches:
- no capability to trigger a reset of the opencapi adapter
- no support for the 'wake_host_thread' command
- no support for adapters with a dual-link connection (none exists yet)
- no access to the adapter-local memory

Many people contributed directly or indirectly, from the software,
hardware and bringup teams. In particular Andrew Donnellan and
Alastair D'Silva, who are developing the related firmware and library.

Feedback welcome!



Frederic Barrat (13):
powerpc/powernv: Introduce new PHB type for opencapi links
powerpc/powernv: Set correct configuration space size for opencapi
devices
powerpc/powernv: Add opal calls for opencapi
powerpc/powernv: Add platform-specific services for opencapi
powerpc/powernv: Capture actag information for the device
ocxl: Driver code for 'generic' opencapi devices
ocxl: Add AFU interrupt support
ocxl: Add a kernel API for other opencapi drivers
ocxl: Add trace points
ocxl: Add Makefile and Kconfig
cxl: Remove support for "Processing accelerators" class
ocxl: Documentation
ocxl: add MAINTAINERS entry

Documentation/accelerators/ocxl.rst | 151 +++++
Documentation/ioctl/ioctl-number.txt | 1 +
MAINTAINERS | 12 +
arch/powerpc/include/asm/opal-api.h | 5 +-
arch/powerpc/include/asm/opal.h | 6 +
arch/powerpc/include/asm/pnv-ocxl.h | 43 ++
arch/powerpc/platforms/powernv/Makefile | 1 +
arch/powerpc/platforms/powernv/npu-dma.c | 2 +-
arch/powerpc/platforms/powernv/ocxl.c | 519 ++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +
arch/powerpc/platforms/powernv/pci-ioda.c | 56 +-
arch/powerpc/platforms/powernv/pci.c | 4 +
arch/powerpc/platforms/powernv/pci.h | 8 +-
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/cxl/pci.c | 2 -
drivers/misc/ocxl/Kconfig | 25 +
drivers/misc/ocxl/Makefile | 10 +
drivers/misc/ocxl/afu_irq.c | 209 +++++++
drivers/misc/ocxl/config.c | 729 +++++++++++++++++++++++++
drivers/misc/ocxl/context.c | 275 ++++++++++
drivers/misc/ocxl/file.c | 438 +++++++++++++++
drivers/misc/ocxl/link.c | 654 ++++++++++++++++++++++
drivers/misc/ocxl/main.c | 40 ++
drivers/misc/ocxl/ocxl_internal.h | 138 +++++
drivers/misc/ocxl/pasid.c | 114 ++++
drivers/misc/ocxl/pci.c | 592 ++++++++++++++++++++
drivers/misc/ocxl/sysfs.c | 150 +++++
drivers/misc/ocxl/trace.c | 13 +
drivers/misc/ocxl/trace.h | 189 +++++++
include/misc/ocxl-config.h | 52 ++
include/misc/ocxl.h | 221 ++++++++
include/uapi/misc/ocxl.h | 56 ++
33 files changed, 4702 insertions(+), 18 deletions(-)
create mode 100644 Documentation/accelerators/ocxl.rst
create mode 100644 arch/powerpc/include/asm/pnv-ocxl.h
create mode 100644 arch/powerpc/platforms/powernv/ocxl.c
create mode 100644 drivers/misc/ocxl/Kconfig
create mode 100644 drivers/misc/ocxl/Makefile
create mode 100644 drivers/misc/ocxl/afu_irq.c
create mode 100644 drivers/misc/ocxl/config.c
create mode 100644 drivers/misc/ocxl/context.c
create mode 100644 drivers/misc/ocxl/file.c
create mode 100644 drivers/misc/ocxl/link.c
create mode 100644 drivers/misc/ocxl/main.c
create mode 100644 drivers/misc/ocxl/ocxl_internal.h
create mode 100644 drivers/misc/ocxl/pasid.c
create mode 100644 drivers/misc/ocxl/pci.c
create mode 100644 drivers/misc/ocxl/sysfs.c
create mode 100644 drivers/misc/ocxl/trace.c
create mode 100644 drivers/misc/ocxl/trace.h
create mode 100644 include/misc/ocxl-config.h
create mode 100644 include/misc/ocxl.h
create mode 100644 include/uapi/misc/ocxl.h

--
2.14.1

\
 
 \ /
  Last update: 2017-12-18 16:25    [W:0.177 / U:33.788 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site