lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/9] PCI: Regroup all PCI related entries into drivers/pci/Makefile
Date
This patch cleans drivers/Makefile up by moving the pci/endpoint and
pci/dwc entries from drivers/Makefile into drivers/pci/Makefile.

Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.

Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
drivers/Makefile | 5 +----
drivers/pci/Kconfig | 1 +
drivers/pci/Makefile | 11 ++++++++---
drivers/pci/host/Makefile | 2 ++
4 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 1d034b680431..9757199b9a65 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,10 +16,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl/
obj-$(CONFIG_GPIOLIB) += gpio/
obj-y += pwm/

-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/
-# PCI dwc controller drivers
-obj-y += pci/dwc/
+obj-y += pci/

obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index bda151788f3f..7eeb969ab86a 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -125,6 +125,7 @@ config PCI_PASID

config PCI_LABEL
def_bool y if (DMI || ACPI)
+ depends on PCI
select NLS

config PCI_HYPERV
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c7819b973df7..7284a7f6ad1e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,12 +3,15 @@
# Makefile for the PCI bus specific drivers.
#

-obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
+obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o

+ifdef CONFIG_PCI
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
+obj-$(CONFIG_OF) += of.o
+endif

obj-$(CONFIG_PCI_QUIRKS) += quirks.o

@@ -44,10 +47,12 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o

obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o

-obj-$(CONFIG_OF) += of.o
-
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG

# PCI host controller drivers
obj-y += host/
obj-y += switch/
+
+obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+# PCI dwc controller drivers
+obj-y += dwc/
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 34ec1d88f961..3b1059190867 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -34,6 +34,8 @@ obj-$(CONFIG_VMD) += vmd.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.

+ifdef CONFIG_PCI
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o
+endif
--
2.11.0
\
 
 \ /
  Last update: 2017-12-18 19:34    [W:0.315 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site