lkml.org 
[lkml]   [2017]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 7/8] ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs
Date
Add the control register as the base for the clock nodes which are
missing them. This squashes the following warnings of the effect when built
with W=1:
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkusb1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkhyperlink0 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkpcie1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkxge has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: rebase

V1: https://patchwork.kernel.org/patch/10115125/

arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index 915a99d5bc5e..5e0e7d232161 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -32,7 +32,7 @@ clocks {
reg-names = "control";
};

- clkusb1: clkusb1 {
+ clkusb1: clkusb1@2350004 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks {
domain-id = <0>;
};

- clkhyperlink0: clkhyperlink0 {
+ clkhyperlink0: clkhyperlink02350030 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks {
domain-id = <5>;
};

- clkpcie1: clkpcie1 {
+ clkpcie1: clkpcie1@235006c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks {
domain-id = <18>;
};

- clkxge: clkxge {
+ clkxge: clkxge@23500c8 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
--
2.14.1
\
 
 \ /
  Last update: 2017-12-16 21:43    [W:0.120 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site