lkml.org 
[lkml]   [2017]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] of: build dbts with symbols when CONFIG_OF_OVERLAY is set
From
Date
Hi Frank,

On 15/12/17 22:06, Frank Rowand wrote:
> On 12/14/17 07:12, Andre Heider wrote:
>> The overlay feature requires the base dtb to be built with symbols, so
>> lets build the dtbs with symbols when overlay support was explicitly
>> enabled.
>>
>> With CONFIG_OF_ALL_DTBS on ARCH=arm the 989 dtb files grow about ~38% on
>> average.
>>
>> Totals in bytes with the 3 biggest ones:
>>
>> Before:
>> 90471 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtb
>> 90521 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dtb
>> 92639 arch/arm/boot/dts/dra7-evm.dtb
>> 25731296 total
>>
>> After:
>> 133203 arch/arm/boot/dts/am57xx-beagle-x15-revc.dtb
>> 133237 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dtb
>> 134545 arch/arm/boot/dts/dra7-evm.dtb
>> 35464440 total
>>
>> Signed-off-by: Andre Heider <a.heider@gmail.com>
>> ---
>>
>> Hi,
>>
>> while playing around with overlays I noticed that I needed to rebuilt
>> my distro's device trees because they didn't come with symbols.
>>
>> Is that for a reason, maybe the not so minor increase in size?
>
> Yes, size is the issue.
>
>
>>
>> Thanks,
>> Andre
>>
>> drivers/of/unittest-data/Makefile | 7 -------
>> scripts/Makefile.lib | 5 +++++
>> 2 files changed, 5 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
>> index 32389acfa616..b65061013512 100644
>> --- a/drivers/of/unittest-data/Makefile
>> +++ b/drivers/of/unittest-data/Makefile
>> @@ -15,13 +15,6 @@ targets += overlay.dtb overlay.dtb.S
>> targets += overlay_bad_phandle.dtb overlay_bad_phandle.dtb.S
>> targets += overlay_bad_symbol.dtb overlay_bad_symbol.dtb.S
>> targets += overlay_base.dtb overlay_base.dtb.S
>> -
>> -# enable creation of __symbols__ node
>> -DTC_FLAGS_overlay := -@
>> -DTC_FLAGS_overlay_bad_phandle := -@
>> -DTC_FLAGS_overlay_bad_symbol := -@
>> -DTC_FLAGS_overlay_base := -@
>> -
>> endif
>>
>> .PRECIOUS: \
>
> No. The unittests require these to be set unconditionally.
>
>
>> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
>> index 1ca4dcd2d500..c7ba4aa8a07a 100644
>> --- a/scripts/Makefile.lib
>> +++ b/scripts/Makefile.lib
>> @@ -278,6 +278,11 @@ DTC_FLAGS += -Wnode_name_chars_strict \
>> -Wproperty_name_chars_strict
>> endif
>>
>> +ifeq ($(CONFIG_OF_OVERLAY),y)
>> +# enable creation of __symbols__ node
>> +DTC_FLAGS += -@
>> +endif
>> +
>> DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
>>
>> # Generate an assembly file to wrap the output of the device tree compiler
>>
>
> Not needed. Instead set DTC_FLAGS in the make command. For example:
>
> DTC_FLAGS=-@ make qcom-apq8074-dragonboard.dtb
>
> There are a few architecture Makefiles that need to be fixed to not unconditionally
> set DTC_FLAGS.

Rebuilding the dts files manually with symbols isn't the problem. The
idea was to enable it with a switch which distros simply can flip.

Passing DTC_FLAGS to `make` would work too I guess, but on multi
platform builds that's still the same issue if there're boards which
can't handle that because of the size increase.

Would a solution which enables symbols per family work?
E.g. CONFIG_MACH_SUN7I chooses to use -@ because it can handle it.

Thanks,
Andre

\
 
 \ /
  Last update: 2017-12-16 18:26    [W:0.123 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site