lkml.org 
[lkml]   [2017]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] clk: fix spin_lock/unlock imbalance on bad clk_enable() reentrancy
From
Date
On 12/15/2017 07:47 AM, Jerome Brunet wrote:
> On Tue, 2017-12-12 at 22:14 -0600, David Lechner wrote:
>> On 12/12/2017 05:43 PM, David Lechner wrote:
>>> If clk_enable() is called in reentrant way and spin_trylock_irqsave() is
>>> not working as expected, it is possible to get a negative enable_refcnt
>>> which results in a missed call to spin_unlock_irqrestore().
>>>
>>> It works like this:
>>>
>>> 1. clk_enable() is called.
>>> 2. clk_enable_unlock() calls spin_trylock_irqsave() and sets
>>> enable_refcnt = 1.
>>> 3. Another clk_enable() is called before the first has returned
>>> (reentrant), but somehow spin_trylock_irqsave() is returning true.
>>> (I'm not sure how/why this is happening yet, but it is happening to me
>>> with arch/arm/mach-davinci clocks that I am working on).
>>
>> I think I have figured out that since CONFIG_SMP=n and
>> CONFIG_DEBUG_SPINLOCK=n on my kernel that
>>
>> #define arch_spin_trylock(lock)({ barrier(); (void)(lock); 1; })
>>
>> in include/linux/spinlock_up.h is causing the problem.
>>
>> So, basically, reentrancy of clk_enable() is broken for non-SMP systems,
>> but I'm not sure I know how to fix it.
>
> Hi David,
>
> Correct me if I'm wrong but, in uni-processor mode, a call to
> spin_trylock_irqsave shall disable the preemption. see _raw_spin_trylock() in
> spinlock_api_up.h:71
>
> In this case I don't understand you could possibly get another call to
> clk_enable() ? ... unless the implementation of your clock ops re-enable the
> preemption or calls the scheduler.
>
>>
>>
>>> 4. Because spin_trylock_irqsave() returned true, enable_lock has been
>>> locked twice without being unlocked and enable_refcnt = 1 is called
>>> instead of enable_refcnt++.
>>> 5. After the inner clock is enabled clk_enable_unlock() is called which
>>> decrements enable_refnct to 0 and calls spin_unlock_irqrestore()
>>> 6. The inner clk_enable() function returns.
>>> 7. clk_enable_unlock() is called again for the outer clock. enable_refcnt
>>> is decremented to -1 and spin_unlock_irqrestore() is *not* called.
>>> 8. The outer clk_enable() function returns.
>>> 9. Unrelated code called later issues a BUG warning about sleeping in an
>>> atomic context because of the unbalanced calls for the spin lock.
>>>
>>> This patch fixes the problem of unbalanced calls by calling
>>> spin_unlock_irqrestore() if enable_refnct <= 0 instead of just checking if
>>> it is == 0.
>
> A negative ref is just illegal, which is why got this line:
> WARN_ON_ONCE(enable_refcnt != 0);
>
> If it ever happens, it means you've got a bug to fix some place else.
> Unless I missed something, the fix proposed is not right.

You are correct that this does not fix the actual problem and the
WARN_ON_ONCE() lines are still triggered. But it does prevent a red
herring in that it fixes the BUG warning about sleeping in an atomic
context in the unrelated code.

The part you are missing is that clk_enable() is called in a reentrant
way by design. This means that the first clk_enable() calls another
clk_enable() (and clk_disable()) before the first clk_enable() returns.

This is needed for a special case of the SoC I am working on. There is a
PLL that supplies 48MHz for USB. To enable the PLL, another clock domain
needs to be enabled temporarily while the PLL is being configured, but
then the other clock domain can be turned back off after the PLL has
locked. It is not your typical case of having a parent clock (in fact
this clock already has a parent clock that is different from the one
that is enabled temporarily).


Here is the code:


static void usb20_phy_clk_enable(struct davinci_clk *clk)
{
u32 val;
u32 timeout = 500000; /* 500 msec */

val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));

/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
clk_enable(usb20_clk);

/*
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
* host may use the PLL clock without USB 2.0 OTG being used.
*/
val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
val |= CFGCHIP2_PHY_PLLON;

writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));

while (--timeout) {
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
if (val & CFGCHIP2_PHYCLKGD)
goto done;
udelay(1);
}

pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
done:
clk_disable(usb20_clk);
}

>
>>>
>>> The BUG warning about sleeping in an atomic context in the unrelated code
>>> is eliminated with this patch, but there are still warnings printed from
>>> clk_enable_unlock() and clk_enable_unlock() because of the reference
>>> counting problems.
>>>
>>> Signed-off-by: David Lechner <david@lechnology.com>
>>> ---
>>> drivers/clk/clk.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>>> index 647d056..bb1b1f9 100644
>>> --- a/drivers/clk/clk.c
>>> +++ b/drivers/clk/clk.c
>>> @@ -162,7 +162,7 @@ static void clk_enable_unlock(unsigned long flags)
>>> WARN_ON_ONCE(enable_owner != current);
>>> WARN_ON_ONCE(enable_refcnt == 0);
>>>
>>> - if (--enable_refcnt) {
>>> + if (--enable_refcnt > 0) {
>>> __release(enable_lock);
>>> return;
>>> }
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2017-12-15 17:27    [W:0.123 / U:1.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site