lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 101/148] bnx2x: fix detection of VLAN filtering feature for VF
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Schmidt <mschmidt@redhat.com>


[ Upstream commit 83bd9eb8fc69cdd5135ed6e1f066adc8841800fd ]

VFs are currently missing the VLAN filtering feature, because we were
checking the PF's acquire response before actually performing the acquire.

Fix it by setting the feature flag later when we have the PF response.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13293,17 +13293,15 @@ static int bnx2x_init_dev(struct bnx2x *
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;

- /* VF with OLD Hypervisor or old PF do not support filtering */
if (IS_PF(bp)) {
if (chip_is_e1x)
bp->accept_any_vlan = true;
else
dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-#ifdef CONFIG_BNX2X_SRIOV
- } else if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
- dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-#endif
}
+ /* For VF we'll know whether to enable VLAN filtering after
+ * getting a response to CHANNEL_TLV_ACQUIRE from PF.
+ */

dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
dev->features |= NETIF_F_HIGHDMA;
@@ -14006,6 +14004,14 @@ static int bnx2x_init_one(struct pci_dev
rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
if (rc)
goto init_one_freemem;
+
+#ifdef CONFIG_BNX2X_SRIOV
+ /* VF with OLD Hypervisor or old PF do not support filtering */
+ if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) {
+ dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ }
+#endif
}

/* Enable SRIOV if capability found in configuration space */

\
 
 \ /
  Last update: 2017-12-12 13:59    [W:0.360 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site