lkml.org 
[lkml]   [2017]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.14 42/60] fm10k: fix mis-ordered parameters in declaration for .ndo_set_vf_bw
Date
From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 3e256ac5b1ec307e5dd5a4c99fbdbc651446c738 ]

We've had support for setting both a minimum and maximum bandwidth via
.ndo_set_vf_bw since commit 883a9ccbae56 ("fm10k: Add support for SR-IOV
to driver", 2014-09-20).

Likely because we do not support minimum rates, the declaration
mis-ordered the "unused" parameter, which causes warnings when analyzed
with cppcheck.

Fix this warning by properly declaring the min_rate and max_rate
variables in the declaration and definition (rather than using
"unused"). Also rename "rate" to max_rate so as to clarify that we only
support setting the maximum rate.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/net/ethernet/intel/fm10k/fm10k.h | 4 ++--
drivers/net/ethernet/intel/fm10k/fm10k_iov.c | 9 +++++----
2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h
index 689c413b7782..d2f9a2dd76a2 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k.h
@@ -526,8 +526,8 @@ s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid);
int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac);
int fm10k_ndo_set_vf_vlan(struct net_device *netdev,
int vf_idx, u16 vid, u8 qos, __be16 vlan_proto);
-int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int rate,
- int unused);
+int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx,
+ int __always_unused min_rate, int max_rate);
int fm10k_ndo_get_vf_config(struct net_device *netdev,
int vf_idx, struct ifla_vf_info *ivi);

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
index 5f4dac0d36ef..f919199944a0 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -482,7 +482,7 @@ int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid,
}

int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx,
- int __always_unused unused, int rate)
+ int __always_unused min_rate, int max_rate)
{
struct fm10k_intfc *interface = netdev_priv(netdev);
struct fm10k_iov_data *iov_data = interface->iov_data;
@@ -493,14 +493,15 @@ int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx,
return -EINVAL;

/* rate limit cannot be less than 10Mbs or greater than link speed */
- if (rate && ((rate < FM10K_VF_TC_MIN) || rate > FM10K_VF_TC_MAX))
+ if (max_rate &&
+ (max_rate < FM10K_VF_TC_MIN || max_rate > FM10K_VF_TC_MAX))
return -EINVAL;

/* store values */
- iov_data->vf_info[vf_idx].rate = rate;
+ iov_data->vf_info[vf_idx].rate = max_rate;

/* update hardware configuration */
- hw->iov.ops.configure_tc(hw, vf_idx, rate);
+ hw->iov.ops.configure_tc(hw, vf_idx, max_rate);

return 0;
}
--
2.11.0
\
 
 \ /
  Last update: 2017-12-13 03:53    [W:1.885 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site