lkml.org 
[lkml]   [2017]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] iio: hx711: add triggered buffer support
On Wed, 6 Dec 2017 09:51:56 +0100
Andreas Klinger <ak@it-klinger.de> wrote:

> Add buffer to device data struct and add trigger function
>
> Data format is quite simple:
> voltage - channel 0 32 Bit
> voltage - channel 1 32 Bit
> timestamp 64 Bit
>
> Using both channels at the same time is working quite slow because of
> changing the channel which needs a dummy read.
>
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> ---
> drivers/iio/adc/Kconfig | 2 +
> drivers/iio/adc/hx711.c | 104 +++++++++++++++++++++++++++++++++++++++---------
> 2 files changed, 88 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index af4fc1279409..a83642e517d5 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -316,6 +316,8 @@ config HI8435
> config HX711
> tristate "AVIA HX711 ADC for weight cells"
> depends on GPIOLIB
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> help
> If you say yes here you get support for AVIA HX711 ADC which is used
> for weigh cells
> diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
> index d10b9f13d557..37982b93a227 100644
> --- a/drivers/iio/adc/hx711.c
> +++ b/drivers/iio/adc/hx711.c
> @@ -24,6 +24,9 @@
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> #include <linux/gpio/consumer.h>
> #include <linux/regulator/consumer.h>
>
> @@ -89,6 +92,11 @@ struct hx711_data {
> int gain_set; /* gain set on device */
> int gain_chan_a; /* gain for channel A */
> struct mutex lock;
> + /*
> + * triggered buffer
> + * 2x32-bit channel + 2x32-bit timestamp
> + */
> + u32 buffer[4];
> };
>
> static int hx711_cycle(struct hx711_data *hx711_data)
> @@ -236,34 +244,40 @@ static int hx711_set_gain_for_channel(struct hx711_data *hx711_data, int chan)
> return 0;
> }
>
> +static int hx711_reset_read(struct hx711_data *hx711_data, int chan)
> +{
> + int ret;
> + int val;
> +
> + /*
> + * hx711_reset() must be called from here
> + * because it could be calling hx711_read() by itself
> + */
> + if (hx711_reset(hx711_data)) {
> + dev_err(hx711_data->dev, "reset failed!");
> + return -EIO;
> + }
> +
> + ret = hx711_set_gain_for_channel(hx711_data, chan);
> + if (ret < 0)
> + return ret;
> +
> + val = hx711_read(hx711_data);
> +
> + return val;
> +}
> +
> static int hx711_read_raw(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> int *val, int *val2, long mask)
> {
> struct hx711_data *hx711_data = iio_priv(indio_dev);
> - int ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> mutex_lock(&hx711_data->lock);
>
> - /*
> - * hx711_reset() must be called from here
> - * because it could be calling hx711_read() by itself
> - */
> - if (hx711_reset(hx711_data)) {
> - mutex_unlock(&hx711_data->lock);
> - dev_err(hx711_data->dev, "reset failed!");
> - return -EIO;
> - }
> -
> - ret = hx711_set_gain_for_channel(hx711_data, chan->channel);
> - if (ret < 0) {
> - mutex_unlock(&hx711_data->lock);
> - return ret;
> - }
> -
> - *val = hx711_read(hx711_data);
> + *val = hx711_reset_read(hx711_data, chan->channel);
>
> mutex_unlock(&hx711_data->lock);
>
> @@ -339,6 +353,36 @@ static int hx711_write_raw_get_fmt(struct iio_dev *indio_dev,
> return IIO_VAL_INT_PLUS_NANO;
> }
>
> +static irqreturn_t hx711_trigger(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct hx711_data *hx711_data = iio_priv(indio_dev);
> + int i, j = 0;
> +
> + mutex_lock(&hx711_data->lock);
> +
> + memset(hx711_data->buffer, 0, sizeof(hx711_data->buffer));
> +
> + for (i = 0; i < indio_dev->masklength; i++) {
> + if (!test_bit(i, indio_dev->active_scan_mask))
> + continue;
> +
> + hx711_data->buffer[j] = hx711_reset_read(hx711_data,
> + indio_dev->channels[i].channel);
> + j++;
> + }
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, hx711_data->buffer,
> + pf->timestamp);
> +
> + mutex_unlock(&hx711_data->lock);
> +
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> static ssize_t hx711_scale_available_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> @@ -387,6 +431,14 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
> .indexed = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .scan_index = 0,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 24,
> + .storagebits = 32,
> + .shift = 0,
> + .endianness = IIO_CPU,
> + },
> },
> {
> .type = IIO_VOLTAGE,
> @@ -394,7 +446,16 @@ static const struct iio_chan_spec hx711_chan_spec[] = {
> .indexed = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .scan_index = 1,
> + .scan_type = {
> + .sign = 'u',
> + .realbits = 24,
> + .storagebits = 32,
> + .shift = 0,
> + .endianness = IIO_CPU,
> + },
> },
> + IIO_CHAN_SOFT_TIMESTAMP(2),
> };
>
> static int hx711_probe(struct platform_device *pdev)
> @@ -482,6 +543,13 @@ static int hx711_probe(struct platform_device *pdev)
> indio_dev->channels = hx711_chan_spec;
> indio_dev->num_channels = ARRAY_SIZE(hx711_chan_spec);
>
> + ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
> + iio_pollfunc_store_time, hx711_trigger, NULL);
> + if (ret < 0) {
> + dev_err(dev, "setup of iio triggered buffer failed\n");
This whole probe needs some reworking given it already has regulator_disable
in two error paths, and it needs it here as well.

Also to maintain ordering so that the remove is in the reverse order
of the probe you cannot use the managed version of iio_triggered_buffer_setup
unless you were to move it before the point where the regulator was enabled
(which would be odd from a logic point of view). Therefore you should undwind
it with a iio_triggered_buffer_cleanup in remove and the error path for
iio_device_register.
> + return ret;
> + }
> +
> ret = iio_device_register(indio_dev);
> if (ret < 0) {
> dev_err(dev, "Couldn't register the device\n");

\
 
 \ /
  Last update: 2017-12-10 19:21    [W:1.221 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site