Messages in this thread | | | From | Fabio Estevam <> | Date | Sun, 10 Dec 2017 13:20:21 -0200 | Subject | Re: [PATCH v1 4/6] ARM: dts: imx7s: add node and supplies for vdd1p2 |
| |
On Tue, Dec 5, 2017 at 8:27 PM, <tyler@opensourcefoundries.com> wrote: > From: Tyler Baker <tyler@opensourcefoundries.com> > > Add the regulator nodes and supplies for vdd1p2. This regulator is > used to power the GPC and USB HSIC PHY. > > Signed-off-by: Tyler Baker <tyler@opensourcefoundries.com> > --- > arch/arm/boot/dts/imx7s.dtsi | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi > index 7b85659..151ab34 100644 > --- a/arch/arm/boot/dts/imx7s.dtsi > +++ b/arch/arm/boot/dts/imx7s.dtsi > @@ -522,6 +522,20 @@ > anatop-max-voltage = <1200000>; > anatop-enable-bit = <0>; > }; > + > + reg_1p2: regulator-vdd1p2@220 {
Using a unit address without a corresponding reg would give you a warning with W=1.
Please see the patch I sent with Subject: ARM: dts: imx7s: Add unit address and reg for the anatop nodes
| |