lkml.org 
[lkml]   [2017]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM64: dts: meson-axg: enable IR controller
From
Date
On Fri, 2017-12-01 at 09:36 +0800, Yixun Lan wrote:
> Enable IR remote controller which find in Amlogic's Meson-AXG SoC.
>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 6 ++++++
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 14 ++++++++++++++
> 2 files changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> index 0864d1ff2d9b..ca676cafdbb3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> @@ -34,3 +34,9 @@
> pinctrl-0 = <&i2c1_z_pins>;
> pinctrl-names = "default";
> };
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 9bb85893c1b7..80d5b8c13fac 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -616,6 +616,13 @@
> #gpio-cells = <2>;
> gpio-ranges = <&pinctrl_aobus 0 0
> 15>;
> };
> +
> + remote_input_ao_pins: remote_input_ao {
> + mux {
> + groups = "remote_input_ao";
> + function = "remote_input_ao";
> + };
> + };
> };
>
> i2c_AO: i2c@5000 {
> @@ -664,6 +671,13 @@
> clock-names = "xtal", "pclk", "baud";
> status = "disabled";
> };
> +
> + ir: ir@8000 {
> + compatible = "amlogic,meson-gx-
> ir","amlogic,meson-gxbb-ir";

The order is bad here (Yes the same mistake is present a *LOT* in the gx family
- I'm preparing a patch for that). In addition, "amlogic,meson-gx-ir" is
unmatched, undocumented and unlikely to be ever used since every compatible SoC
will use the gxbb compatible string. You may as well drop it and just keep the
gxbb one

> + reg = <0x0 0x8000 0x0 0x20>;
> + interrupts = <GIC_SPI 196
> IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> };
> };
> };

\
 
 \ /
  Last update: 2017-12-01 10:26    [W:0.028 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site