lkml.org 
[lkml]   [2017]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] USB: add device-tree support for interfaces
Date
This series adds support for representing USB interfaces in device tree
by implementing support for "interface nodes" and "combined nodes" from
the OF specification.

This is needed to be able to describe non-discoverable properties of
permanently attached USB devices and their interfaces such as any
i2c-clients connected to a USB-i2c bridge (e.g. the dln2 mfd) or,
eventually, devices connected to usb-serial converters (to be used with
serdev).

As part of this series the current binding for USB devices is cleaned
up and some already-used properties of "host-controller nodes" and "hub
nodes" are explicitly defined.

While doing this work I realised that a broken binding for USB-port LED
triggers had recently been merged. This trigger implementation assumes
an undocumented and conflicting binding for USB (root) hub ports, which
in fact lack a representation in device tree (the child nodes of hub
nodes represent the attached USB devices):

80dc6e1cd85f ("dt-bindings: leds: document new trigger-sources property")

In this series I only address an of_node leak in the trigger
implementation and add a FIXME about the port/device mixup. Note that
some broadcom dts have already started using such a "port" binding:

a503cf0cbe66 ("ARM: dts: BCM53573: Specify USB ports of on-SoC controllers")
69d22c70ac9a ("ARM: dts: BCM5301X: Specify USB ports for each controller")

To fix this, any triggers need to be described using properties of the
host-controller (or hub) rather than of their children.

Johan


Johan Hovold (8):
dt-bindings: usb: fix example hub node name
dt-bindings: usb: fix reg-property port-number range
dt-bindings: usb: clean up compatible property
dt-bindings: usb: document hub and host-controller properties
dt-bindings: usb: add interface binding
USB: add device-tree support for interfaces
USB: ledtrig-usbport: fix of-node leak
USB: of: clean up device-node helper

.../devicetree/bindings/usb/usb-device.txt | 99 +++++++++++++++++++---
drivers/usb/core/ledtrig-usbport.c | 10 ++-
drivers/usb/core/message.c | 18 ++--
drivers/usb/core/of.c | 95 ++++++++++++++++++---
drivers/usb/core/usb.c | 3 +-
include/linux/usb/of.h | 21 ++++-
6 files changed, 208 insertions(+), 38 deletions(-)

--
2.15.0

\
 
 \ /
  Last update: 2017-11-09 18:17    [W:0.114 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site