lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/5] clk: Add Aspeed clock driver
Hi Stephen (and other maintainers),

Have you had a chance to review this series?

I've done a lot of testing and they are looking good on hardware.

On Mon, Oct 30, 2017 at 4:32 PM, Joel Stanley <joel@jms.id.au> wrote:
> This driver supports the ast2500, ast2400 (and derivative) BMC SoCs from
> Aspeed.
>
> This is v5. See patches for detailed changelogs.
>
> v5: Address review from Andrew
> v4: Address review from Andrew and Stephen.
> v3: Address review from Andrew and has seen more testing on hardware
> v2: split the driver out into a series of patches to make them easier to
> review.
>
> All of the important clocks are supported, with most non-essential ones
> also implemented where information is available. I am working with
> Aspeed to clear up some of the missing information, including the
> missing parent-sibling relationships.
>
> We need to know the rate of the apb clock in order to correctly program
> the clocksource driver, so the apb and it's parents are created in the
> CLK_OF_DECLARE_DRIVER callback.
>
> The rest of the clocks are created at normal driver probe time. I
> followed the Gemini driver's lead with using the regmap where I could,
> but also having a pointer to the base address for use with the common
> clock callbacks.
>
> The driver borrows from the clk_gate common clock infrastructure, but modifies
> it in order to support the clock gate and reset pair that most of the clocks
> have. This pair must be reset-ungated-released, with appropriate delays,
> according to the datasheet.
>
> The first patch introduces the core clock registration parts, and describes
> the clocks. The second creates the core clocks, giving the system enough to
> boot (but without uart). Next come the non-core clocks, and finally the reset
> controller that is used for the few cocks that don't have a gate to go with their
> reset pair.
>
> Please review!
>
> Cheers,
>
> Joel
>
>
> Joel Stanley (5):
> clk: Add clock driver for ASPEED BMC SoCs
> clk: aspeed: Register core clocks
> clk: aspeed: Add platform driver and register PLLs
> clk: aspeed: Register gated clocks
> clk: aspeed: Add reset controller
>
> drivers/clk/Kconfig | 12 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-aspeed.c | 666 +++++++++++++++++++++++++++++++
> include/dt-bindings/clock/aspeed-clock.h | 52 +++
> 4 files changed, 731 insertions(+)
> create mode 100644 drivers/clk/clk-aspeed.c
> create mode 100644 include/dt-bindings/clock/aspeed-clock.h
>
> --
> 2.14.1
>

\
 
 \ /
  Last update: 2017-11-08 21:08    [W:0.058 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site