lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] usb: dwc3: Enable USB 3.0 phy driver
Date
Adds entry point at dwc3 core init function to enable
USB 3.0 PHY driver.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v2:
- New file

drivers/usb/dwc3/core.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 03474d3575ab..a9df03c64a7b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -746,6 +746,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
{
u32 reg;
int ret;
+ int retval;
+ struct phy *phy;

if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
@@ -770,6 +772,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (ret)
goto err0;

+ phy = phy_get(dwc->dev, "usb-phy");
+ if (IS_ERR(phy)) {
+ retval = PTR_ERR(phy);
+ if (retval == -EPROBE_DEFER)
+ dev_dbg(dwc->dev, "usb-phy no found\n");
+ } else {
+ retval = phy_init(phy);
+ if (retval) {
+ phy_put(phy);
+ dev_dbg(dwc->dev, "phy_init() error!\n");
+ }
+ }
+
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
--
2.14.1
\
 
 \ /
  Last update: 2017-11-08 21:02    [W:0.067 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site