lkml.org 
[lkml]   [2017]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/9] irqchip: stm32: add stm32h7 support
From
Date
hi Marc

normally, Alex take the last 3 ("ARM: dts")
commits in his branch, and will send in his pull request
Alex you confirm?

BR
Ludo

On 11/07/2017 12:23 PM, Marc Zyngier wrote:
> Hi Ludovic,
>
> On 06/11/17 17:03, Ludovic Barre wrote:
>> From: Ludovic Barre <ludovic.barre@st.com>
>>
>> This series adds:
>> -Management of multi-bank of external interrupts
>> stm32h7 has up to 96 inputs (3 banks of 32 inputs).
>> -Fix initial value after cold/hot boot (wakeup issue).
>>
>> Changes v3:
>> -remove chip.name and handler, already done by
>> irq_alloc_domain_generic_chips
>> -add Rob ack in dt-bindings commit
>>
>> Changes v2:
>> -Remove irq_mask and adds const on struct stm32_exti_bank
>> -Add wrapper functions pending and ack
>> -Replace BITS_PER_LONG by IRQS_PER_BANK
>> -Fill commit message on
>> "ARM: dts: stm32: add support of exti on stm32h743"
>> -Add system config bank for stm32h7
>>
>> Ludovic Barre (9):
>> irqchip: stm32: select GENERIC_IRQ_CHIP
>> irqchip: stm32: add multi-bank management
>> dt-bindings: interrupt-controllers: add compatible string for stm32h7
>> irqchip: stm32: add stm32h7 support
>> irqchip: stm32: fix initial values
>> irqchip: stm32: move the wakeup on interrupt mask
>> ARM: dts: stm32: add exti support for stm32h743
>> ARM: dts: stm32: add system config bank node for stm32h743
>> ARM: dts: stm32: add support of exti on stm32h743 pinctrl
>>
>> .../interrupt-controller/st,stm32-exti.txt | 4 +-
>> arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 +++
>> arch/arm/boot/dts/stm32h743.dtsi | 13 ++
>> drivers/irqchip/Kconfig | 1 +
>> drivers/irqchip/irq-stm32-exti.c | 206 ++++++++++++++++-----
>> 5 files changed, 198 insertions(+), 50 deletions(-)
>>
>
> I'm happy to take the first 6 patches through the irqchip tree. How
> about the last 3? I'd rather see them routed via armsoc if there is any
> risk of merge conflicts.
>
> How do you want to proceed?
>
> Thanks,
>
> M.
>

\
 
 \ /
  Last update: 2017-11-08 21:05    [W:0.125 / U:5.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site