lkml.org 
[lkml]   [2017]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] i2c: aspeed: Deassert reset in probe
On Wed, Nov 01, 2017 at 10:53:30AM +1030, Joel Stanley wrote:
> In order to use i2c from a cold boot, the i2c peripheral must be taken
> out of reset. We request a shared reset controller each time a bus
> driver is loaded, as the reset is shared between the 14 i2c buses.
>
> On remove the reset is asserted, which only touches the hardware once
> the last i2c bus is removed.
>
> The reset is required as the I2C buses will not work without releasing
> the reset. Previously the driver only worked with out of tree hacks
> that released this reset before the driver was loaded. Update the
> device tree bindings to reflect this.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Applied to for-next, thanks and thanks for the ack, Rob!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-11-06 19:23    [W:0.095 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site