lkml.org 
[lkml]   [2017]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 0/4] ARM64: dts: meson-gx: fix VPU init for non-vendor u-boot
Date
Neil Armstrong <narmstrong@baylibre.com> writes:

> On the Amlogic Gx SoCs (GXBB, GXL & GXM), the VPU power domain is initialized
> by the vendor U-Boot code, but running mainline U-boot has been possible
> on these SoCs. But lacking such init made the system lock at kernel boot.
>
> A PM Power Domain driver has been pushed at [1] to solve the main issue.
>
> This patchset depends on the the following patchsets :
> - [1] soc: amlogic: add support for Meson GX VPU Domains
> - [2] reset: meson: add level reset support for GX SoC family
> - [3] clk: meson: gxbb: Add VPU and VAPB clocks
>
> Changes since v1 at [4] :
> - Dropped hdmi-supply in hdmi node until 4.16
> - set 5v regulator always-on for now

v2 applied to v4.15/fixes,

Thanks,

Kevin

\
 
 \ /
  Last update: 2017-12-01 08:43    [W:0.052 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site