lkml.org 
[lkml]   [2017]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/18] dt-bindings: panel: lvds: Document power-supply property
Hi Rob,

On Tue, Nov 28, 2017 at 11:48:47AM -0600, Rob Herring wrote:
> Please CC DT list.
>
> On Mon, Nov 27, 2017 at 9:41 AM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > The power-supply property is used by a vast majority of panels, including
> > panel-simple. Let's document it as a common property
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> > Documentation/devicetree/bindings/display/panel/panel-common.txt | 6 ++++++
> > Documentation/devicetree/bindings/display/panel/panel-lvds.txt | 1 +
> > 2 files changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt
> > index ec52c472c845..125ea68052af 100644
> > --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt
> > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt
> > @@ -78,6 +78,12 @@ used for panels that implement compatible control signals.
> > while active. Active high reset signals can be supported by inverting the
> > GPIO specifier polarity flag.
> >
> > +Power
> > +-----
> > +
> > +- power-supply: many display panels need an additional power supply in
> > + order to be fully powered-up. For such panels, power-supply contains
> > + a phandle to the regulator powering the panel.
> >
> > Backlight
> > ---------
> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> > index b938269f841e..250850a2150b 100644
> > --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> > +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> > @@ -32,6 +32,7 @@ Optional properties:
> > - label: See panel-common.txt.
> > - gpios: See panel-common.txt.
> > - backlight: See panel-common.txt.
> > +- power-supply: See panel-common.txt.
>
> simple-panel.txt should do the same.

I'll make simple-panel do that then

> Really, I'd like to see panel-common.txt and simple-panel.txt merged
> and simple-panel.txt removed altogether. But there are a lot of
> references back to simple-panel.txt. A given panel still needs to say
> what common properties it uses or doesn't use. Omitting a property
> like power-supply is ambiguous and can either mean "I only have 1
> supply" or "I haven't thought about supplies yet there are more than
> 1".

While I agree with you here, and in general, power-supply should be
mandatory, do you expect me to fix all the panel bindings as part of
this serie?

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-11-30 16:31    [W:0.055 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site