lkml.org 
[lkml]   [2017]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: mptsas driver cannot detect hotplugging disk with the LSI SCSI SAS1068 controller in Ubuntu guest on VMware
From
Date
On 11/03/2017 04:38 AM, Gavin Guo wrote:
> On Sat, Oct 28, 2017 at 11:35 AM, Gavin Guo <gavin.guo@canonical.com> wrote:
>> On Fri, Oct 27, 2017 at 10:53 PM, Hannes Reinecke <hare@suse.de> wrote:
>>> On 10/27/2017 04:02 PM, Gavin Guo wrote:
>>>> Hi Hannes,
>>>>
>>>> Thank you for looking into the issue. If there is anything I can help
>>>> to test the patch? I appreciate your help. Thank you.
>>>>
>>> If you had checked linux-scsi you would have found this patch:
>>> '[PATCH] mptsas: Fixup device hotplug for VMWare ESXi', which I guess is
>>> already scheduled for inclusion in 4.14.
>>> Anything else I could help you with?
>>>
>>> Cheers,
>>>
>>> Hannes
>>> --
>>> Dr. Hannes Reinecke Teamlead Storage & Networking
>>> hare@suse.de +49 911 74053 688
>>> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
>>> GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
>>> HRB 21284 (AG Nürnberg)
>>
>> Really appreciate your help. I will proceed the testing and keep you posted.
>
> Hello Hannes,
>
> I've tested the MPT SAS device controller, the patch works perfectly.
> However, the MPT SPI still cannot work with the hotplugging. The lspci
> of the LSI SPI device is listed:
>
> 00:10.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
> 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 01)
> Subsystem: VMware LSI Logic Parallel SCSI Controller [15ad:1976]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (1500ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at 1400 [size=256]
> Region 1: Memory at feba0000 (64-bit, non-prefetchable) [size=128K]
> Region 3: Memory at febc0000 (64-bit, non-prefetchable) [size=128K]
> [virtual] Expansion ROM at 40008000 [disabled] [size=16K]
> Kernel driver in use: mptspi
>
> The vendor id/device id[1000:0030] can also be found in the
> mptspi_pci_table(drivers/message/fusion/mptspi.c).
>
> PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030
>
> If there is anything I missed in the testing? I appreciate your help.
>
Don't. Ever. Try.

SCSI Parallel hotplugging is so loosely defined that essentially every
vendor can (and did!) implement their own thing, and _still_ be spec
compliant.
Plus there is no guarantee that we even see events when a hot-add
occurs. So any thingie we put in here has a really high chance of
breaking other installations.
I wouldn't even bother to attempt this; it's virtualized anyway so you
can as well switch to the SAS emulation here.
Or use a different SCSI parallel emulation like the Symbios/LSI 53c800 one.

Cheers,

Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2017-11-03 12:00    [W:0.064 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site