lkml.org 
[lkml]   [2017]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC 0/2] of: Add whitelist
On Wed, Nov 29, 2017 at 3:20 AM, Frank Rowand <frowand.list@gmail.com> wrote:
> On 11/27/17 15:58, Alan Tull wrote:
>> Here's a proposal for a whitelist to lock down the dynamic device tree.
>>
>> For an overlay to be accepted, all of its targets are required to be
>> on a target node whitelist.
>>
>> Currently the only way I have to get on the whitelist is calling a
>> function to add a node. That works for fpga regions, but I think
>> other uses will need a way of having adding specific nodes from the
>> base device tree, such as by adding a property like 'allow-overlay;'
>> or 'allow-overlay = "okay";' If that is acceptable, I could use some
>> advice on where that particular code should go.
>>
>> Alan
>>
>> Alan Tull (2):
>> of: overlay: add whitelist
>> fpga: of region: add of-fpga-region to whitelist
>>
>> drivers/fpga/of-fpga-region.c | 9 ++++++
>> drivers/of/overlay.c | 73 +++++++++++++++++++++++++++++++++++++++++++
>> include/linux/of.h | 12 +++++++
>> 3 files changed, 94 insertions(+)
>>
>
> The plan was to use connectors to restrict where an overlay could be applied.
> I would prefer not to have multiple methods for accomplishing the same thing
> unless there is a compelling reason to do so.

Connector nodes need a mechanism to enable themselves, too. I don't
think connector nodes are going to solve every usecase.

Rob

\
 
 \ /
  Last update: 2017-11-29 14:32    [W:0.150 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site