[lkml]   [2017]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] irqchip/gic-v3: Support MSIs via aliases and distributor

Hi Stephen,

Thanks for the patch.
On 27/11/17 10:24, Stephen Boyd wrote:
> Some GIC configurations don't have an accessible ITS, but they
> want to support MSIs through the distributor's SETSPI registers
> or through the IMPLEMENTATION DEFINED message-based interrupt
> request register region. This mode of operation is similar to the
> v2m support on gic-400, but we don't necessarily know what
> particular SPIs are supported as MSIs so we need some help from
> firmware to know what to do.
> Introduce an "arm,spi-ranges" property for this, similar to the
> "marvell,spi-ranges" property, that indicates the base and size
> of each MSI range. This property applies equally to the
> distributor and alias registers. In either case, we detect this
> mode of operation by looking for a node with the "msi-controller"
> property and then probe the v2m frame code on top of it. Assume
> these nodes will have the "arm,spi-ranges" property in them so
> that the v2m code works mostly unmodified.
> Cc: <>
> Cc: Srinivas Kandagatla <>
> Cc: Marc Zyngier <>
> Signed-off-by: Stephen Boyd <>

Tested it on DB820c board.

Tested-by: Srinivas Kandagatla <>

 \ /
  Last update: 2017-11-28 08:17    [W:0.091 / U:1.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site