lkml.org 
[lkml]   [2017]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] drm/rockchip: Add ROCKCHIP DW MIPI DSI controller driver
From
Date
Hi Archit,


On 2017年11月28日 14:27, Archit Taneja wrote:
> Hi,
>
> Thanks a lot for working on this. Some comments below.
>
Those comments have fixed in patch_v3
https://patchwork.kernel.org/patch/10079857/
Thanks for review.
> On 11/28/2017 07:25 AM, Nickey Yang wrote:
>> Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
>> MIPI DSI host controller bridge.
>>
>> Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
>> ---
>>   drivers/gpu/drm/rockchip/Kconfig                |    2 +-
>>   drivers/gpu/drm/rockchip/Makefile               |    2 +-
>>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c          | 1349
>> -----------------------
>>   drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c |  756 +++++++++++++
>>   drivers/gpu/drm/rockchip/rockchip_drm_drv.c     |    2 +-
>>   drivers/gpu/drm/rockchip/rockchip_drm_drv.h     |    2 +-
>>   6 files changed, 760 insertions(+), 1353 deletions(-)
>>   delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>   create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
>>
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig
>> b/drivers/gpu/drm/rockchip/Kconfig
>> index 0ccc762..9eb4795 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -7,7 +7,7 @@ config DRM_ROCKCHIP
>>       select VIDEOMODE_HELPERS
>>       select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP
>>       select DRM_DW_HDMI if ROCKCHIP_DW_HDMI
>> -    select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
>> +    select DRM_DW_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
>>       select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC
>>       help
>>         Choose this option if you have a Rockchip soc chipset.
>> diff --git a/drivers/gpu/drm/rockchip/Makefile
>> b/drivers/gpu/drm/rockchip/Makefile
>> index a314e21..c05fe47 100644
>> --- a/drivers/gpu/drm/rockchip/Makefile
>> +++ b/drivers/gpu/drm/rockchip/Makefile
>> @@ -11,7 +11,7 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) +=
>> rockchip_drm_fbdev.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>> -rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
>> +rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi_rockchip.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
>>   rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
>>   diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> deleted file mode 100644
>> index b15755b..0000000
>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>> +++ /dev/null
>> @@ -1,1349 +0,0 @@
>> -/*
>> - * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or
>> - * (at your option) any later version.
>> - */
>> -#include <linux/clk.h>
>> -#include <linux/component.h>
>> -#include <linux/iopoll.h>
>> -#include <linux/math64.h>
>> -#include <linux/module.h>
>> -#include <linux/of_device.h>
>> -#include <linux/pm_runtime.h>
>> -#include <linux/regmap.h>
>> -#include <linux/reset.h>
>> -#include <linux/mfd/syscon.h>
>> -#include <drm/drm_atomic_helper.h>
>> -#include <drm/drm_crtc.h>
>> -#include <drm/drm_crtc_helper.h>
>> -#include <drm/drm_mipi_dsi.h>
>> -#include <drm/drm_of.h>
>> -#include <drm/drm_panel.h>
>> -#include <drm/drmP.h>
>> -#include <video/mipi_display.h>
>> -
>> -#include "rockchip_drm_drv.h"
>> -#include "rockchip_drm_vop.h"
>> -
>> -#define DRIVER_NAME    "dw-mipi-dsi"
>> -
>> -#define RK3288_GRF_SOC_CON6        0x025c
>> -#define RK3288_DSI0_SEL_VOP_LIT        BIT(6)
>> -#define RK3288_DSI1_SEL_VOP_LIT        BIT(9)
>> -
>> -#define RK3399_GRF_SOC_CON20        0x6250
>> -#define RK3399_DSI0_SEL_VOP_LIT        BIT(0)
>> -#define RK3399_DSI1_SEL_VOP_LIT        BIT(4)
>> -
>> -/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
>> -#define RK3399_GRF_SOC_CON22        0x6258
>> -#define RK3399_GRF_DSI_MODE        0xffff0000
>> -
>> -#define DSI_VERSION            0x00
>> -#define DSI_PWR_UP            0x04
>> -#define RESET                0
>> -#define POWERUP                BIT(0)
>> -
>> -#define DSI_CLKMGR_CFG            0x08
>> -#define TO_CLK_DIVIDSION(div)        (((div) & 0xff) << 8)
>> -#define TX_ESC_CLK_DIVIDSION(div)    (((div) & 0xff) << 0)
>> -
>> -#define DSI_DPI_VCID            0x0c
>> -#define DPI_VID(vid)            (((vid) & 0x3) << 0)
>> -
>> -#define DSI_DPI_COLOR_CODING        0x10
>> -#define EN18_LOOSELY            BIT(8)
>> -#define DPI_COLOR_CODING_16BIT_1    0x0
>> -#define DPI_COLOR_CODING_16BIT_2    0x1
>> -#define DPI_COLOR_CODING_16BIT_3    0x2
>> -#define DPI_COLOR_CODING_18BIT_1    0x3
>> -#define DPI_COLOR_CODING_18BIT_2    0x4
>> -#define DPI_COLOR_CODING_24BIT        0x5
>> -
>> -#define DSI_DPI_CFG_POL            0x14
>> -#define COLORM_ACTIVE_LOW        BIT(4)
>> -#define SHUTD_ACTIVE_LOW        BIT(3)
>> -#define HSYNC_ACTIVE_LOW        BIT(2)
>> -#define VSYNC_ACTIVE_LOW        BIT(1)
>> -#define DATAEN_ACTIVE_LOW        BIT(0)
>> -
>> -#define DSI_DPI_LP_CMD_TIM        0x18
>> -#define OUTVACT_LPCMD_TIME(p)        (((p) & 0xff) << 16)
>> -#define INVACT_LPCMD_TIME(p)        ((p) & 0xff)
>> -
>> -#define DSI_DBI_CFG            0x20
>> -#define DSI_DBI_CMDSIZE            0x28
>> -
>> -#define DSI_PCKHDL_CFG            0x2c
>> -#define EN_CRC_RX            BIT(4)
>> -#define EN_ECC_RX            BIT(3)
>> -#define EN_BTA                BIT(2)
>> -#define EN_EOTP_RX            BIT(1)
>> -#define EN_EOTP_TX            BIT(0)
>> -
>> -#define DSI_MODE_CFG            0x34
>> -#define ENABLE_VIDEO_MODE        0
>> -#define ENABLE_CMD_MODE            BIT(0)
>> -
>> -#define DSI_VID_MODE_CFG        0x38
>> -#define FRAME_BTA_ACK            BIT(14)
>> -#define ENABLE_LOW_POWER        (0x3f << 8)
>> -#define ENABLE_LOW_POWER_MASK        (0x3f << 8)
>> -#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES    0x0
>> -#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS    0x1
>> -#define VID_MODE_TYPE_BURST            0x2
>> -#define VID_MODE_TYPE_MASK            0x3
>> -
>> -#define DSI_VID_PKT_SIZE        0x3c
>> -#define VID_PKT_SIZE(p)            (((p) & 0x3fff) << 0)
>> -#define VID_PKT_MAX_SIZE        0x3fff
>> -
>> -#define DSI_VID_HSA_TIME        0x48
>> -#define DSI_VID_HBP_TIME        0x4c
>> -#define DSI_VID_HLINE_TIME        0x50
>> -#define DSI_VID_VSA_LINES        0x54
>> -#define DSI_VID_VBP_LINES        0x58
>> -#define DSI_VID_VFP_LINES        0x5c
>> -#define DSI_VID_VACTIVE_LINES        0x60
>> -#define DSI_CMD_MODE_CFG        0x68
>> -#define MAX_RD_PKT_SIZE_LP        BIT(24)
>> -#define DCS_LW_TX_LP            BIT(19)
>> -#define DCS_SR_0P_TX_LP            BIT(18)
>> -#define DCS_SW_1P_TX_LP            BIT(17)
>> -#define DCS_SW_0P_TX_LP            BIT(16)
>> -#define GEN_LW_TX_LP            BIT(14)
>> -#define GEN_SR_2P_TX_LP            BIT(13)
>> -#define GEN_SR_1P_TX_LP            BIT(12)
>> -#define GEN_SR_0P_TX_LP            BIT(11)
>> -#define GEN_SW_2P_TX_LP            BIT(10)
>> -#define GEN_SW_1P_TX_LP            BIT(9)
>> -#define GEN_SW_0P_TX_LP            BIT(8)
>> -#define EN_ACK_RQST            BIT(1)
>> -#define EN_TEAR_FX            BIT(0)
>> -
>> -#define CMD_MODE_ALL_LP            (MAX_RD_PKT_SIZE_LP | \
>> -                     DCS_LW_TX_LP | \
>> -                     DCS_SR_0P_TX_LP | \
>> -                     DCS_SW_1P_TX_LP | \
>> -                     DCS_SW_0P_TX_LP | \
>> -                     GEN_LW_TX_LP | \
>> -                     GEN_SR_2P_TX_LP | \
>> -                     GEN_SR_1P_TX_LP | \
>> -                     GEN_SR_0P_TX_LP | \
>> -                     GEN_SW_2P_TX_LP | \
>> -                     GEN_SW_1P_TX_LP | \
>> -                     GEN_SW_0P_TX_LP)
>> -
>> -#define DSI_GEN_HDR            0x6c
>> -#define GEN_HDATA(data)            (((data) & 0xffff) << 8)
>> -#define GEN_HDATA_MASK            (0xffff << 8)
>> -#define GEN_HTYPE(type)            (((type) & 0xff) << 0)
>> -#define GEN_HTYPE_MASK            0xff
>> -
>> -#define DSI_GEN_PLD_DATA        0x70
>> -
>> -#define DSI_CMD_PKT_STATUS        0x74
>> -#define GEN_CMD_EMPTY            BIT(0)
>> -#define GEN_CMD_FULL            BIT(1)
>> -#define GEN_PLD_W_EMPTY            BIT(2)
>> -#define GEN_PLD_W_FULL            BIT(3)
>> -#define GEN_PLD_R_EMPTY            BIT(4)
>> -#define GEN_PLD_R_FULL            BIT(5)
>> -#define GEN_RD_CMD_BUSY            BIT(6)
>> -
>> -#define DSI_TO_CNT_CFG            0x78
>> -#define HSTX_TO_CNT(p)            (((p) & 0xffff) << 16)
>> -#define LPRX_TO_CNT(p)            ((p) & 0xffff)
>> -
>> -#define DSI_BTA_TO_CNT            0x8c
>> -#define DSI_LPCLK_CTRL            0x94
>> -#define AUTO_CLKLANE_CTRL        BIT(1)
>> -#define PHY_TXREQUESTCLKHS        BIT(0)
>> -
>> -#define DSI_PHY_TMR_LPCLK_CFG        0x98
>> -#define PHY_CLKHS2LP_TIME(lbcc)        (((lbcc) & 0x3ff) << 16)
>> -#define PHY_CLKLP2HS_TIME(lbcc)        ((lbcc) & 0x3ff)
>> -
>> -#define DSI_PHY_TMR_CFG            0x9c
>> -#define PHY_HS2LP_TIME(lbcc)        (((lbcc) & 0xff) << 24)
>> -#define PHY_LP2HS_TIME(lbcc)        (((lbcc) & 0xff) << 16)
>> -#define MAX_RD_TIME(lbcc)        ((lbcc) & 0x7fff)
>> -
>> -#define DSI_PHY_RSTZ            0xa0
>> -#define PHY_DISFORCEPLL            0
>> -#define PHY_ENFORCEPLL            BIT(3)
>> -#define PHY_DISABLECLK            0
>> -#define PHY_ENABLECLK            BIT(2)
>> -#define PHY_RSTZ            0
>> -#define PHY_UNRSTZ            BIT(1)
>> -#define PHY_SHUTDOWNZ            0
>> -#define PHY_UNSHUTDOWNZ            BIT(0)
>> -
>> -#define DSI_PHY_IF_CFG            0xa4
>> -#define N_LANES(n)            ((((n) - 1) & 0x3) << 0)
>> -#define PHY_STOP_WAIT_TIME(cycle)    (((cycle) & 0xff) << 8)
>> -
>> -#define DSI_PHY_STATUS            0xb0
>> -#define LOCK                BIT(0)
>> -#define STOP_STATE_CLK_LANE        BIT(2)
>> -
>> -#define DSI_PHY_TST_CTRL0        0xb4
>> -#define PHY_TESTCLK            BIT(1)
>> -#define PHY_UNTESTCLK            0
>> -#define PHY_TESTCLR            BIT(0)
>> -#define PHY_UNTESTCLR            0
>> -
>> -#define DSI_PHY_TST_CTRL1        0xb8
>> -#define PHY_TESTEN            BIT(16)
>> -#define PHY_UNTESTEN            0
>> -#define PHY_TESTDOUT(n)            (((n) & 0xff) << 8)
>> -#define PHY_TESTDIN(n)            (((n) & 0xff) << 0)
>> -
>> -#define DSI_INT_ST0            0xbc
>> -#define DSI_INT_ST1            0xc0
>> -#define DSI_INT_MSK0            0xc4
>> -#define DSI_INT_MSK1            0xc8
>> -
>> -#define PHY_STATUS_TIMEOUT_US        10000
>> -#define CMD_PKT_STATUS_TIMEOUT_US    20000
>> -
>> -#define BYPASS_VCO_RANGE    BIT(7)
>> -#define VCO_RANGE_CON_SEL(val)    (((val) & 0x7) << 3)
>> -#define VCO_IN_CAP_CON_DEFAULT    (0x0 << 1)
>> -#define VCO_IN_CAP_CON_LOW    (0x1 << 1)
>> -#define VCO_IN_CAP_CON_HIGH    (0x2 << 1)
>> -#define REF_BIAS_CUR_SEL    BIT(0)
>> -
>> -#define CP_CURRENT_3MA        BIT(3)
>> -#define CP_PROGRAM_EN        BIT(7)
>> -#define LPF_PROGRAM_EN        BIT(6)
>> -#define LPF_RESISTORS_20_KOHM    0
>> -
>> -#define HSFREQRANGE_SEL(val)    (((val) & 0x3f) << 1)
>> -
>> -#define INPUT_DIVIDER(val)    (((val) - 1) & 0x7f)
>> -#define LOW_PROGRAM_EN        0
>> -#define HIGH_PROGRAM_EN        BIT(7)
>> -#define LOOP_DIV_LOW_SEL(val)    (((val) - 1) & 0x1f)
>> -#define LOOP_DIV_HIGH_SEL(val)    ((((val) - 1) >> 5) & 0x1f)
>> -#define PLL_LOOP_DIV_EN        BIT(5)
>> -#define PLL_INPUT_DIV_EN    BIT(4)
>> -
>> -#define POWER_CONTROL        BIT(6)
>> -#define INTERNAL_REG_CURRENT    BIT(3)
>> -#define BIAS_BLOCK_ON        BIT(2)
>> -#define BANDGAP_ON        BIT(0)
>> -
>> -#define TER_RESISTOR_HIGH    BIT(7)
>> -#define    TER_RESISTOR_LOW    0
>> -#define LEVEL_SHIFTERS_ON    BIT(6)
>> -#define TER_CAL_DONE        BIT(5)
>> -#define SETRD_MAX        (0x7 << 2)
>> -#define POWER_MANAGE        BIT(1)
>> -#define TER_RESISTORS_ON    BIT(0)
>> -
>> -#define BIASEXTR_SEL(val)    ((val) & 0x7)
>> -#define BANDGAP_SEL(val)    ((val) & 0x7)
>> -#define TLP_PROGRAM_EN        BIT(7)
>> -#define THS_PRE_PROGRAM_EN    BIT(7)
>> -#define THS_ZERO_PROGRAM_EN    BIT(6)
>> -
>> -#define DW_MIPI_NEEDS_PHY_CFG_CLK    BIT(0)
>> -#define DW_MIPI_NEEDS_GRF_CLK        BIT(1)
>> -
>> -enum {
>> -    BANDGAP_97_07,
>> -    BANDGAP_98_05,
>> -    BANDGAP_99_02,
>> -    BANDGAP_100_00,
>> -    BANDGAP_93_17,
>> -    BANDGAP_94_15,
>> -    BANDGAP_95_12,
>> -    BANDGAP_96_10,
>> -};
>> -
>> -enum {
>> -    BIASEXTR_87_1,
>> -    BIASEXTR_91_5,
>> -    BIASEXTR_95_9,
>> -    BIASEXTR_100,
>> -    BIASEXTR_105_94,
>> -    BIASEXTR_111_88,
>> -    BIASEXTR_118_8,
>> -    BIASEXTR_127_7,
>> -};
>> -
>> -struct dw_mipi_dsi_plat_data {
>> -    u32 dsi0_en_bit;
>> -    u32 dsi1_en_bit;
>> -    u32 grf_switch_reg;
>> -    u32 grf_dsi0_mode;
>> -    u32 grf_dsi0_mode_reg;
>> -    unsigned int flags;
>> -    unsigned int max_data_lanes;
>> -};
>> -
>> -struct dw_mipi_dsi {
>> -    struct drm_encoder encoder;
>> -    struct drm_connector connector;
>> -    struct mipi_dsi_host dsi_host;
>> -    struct drm_panel *panel;
>> -    struct device *dev;
>> -    struct regmap *grf_regmap;
>> -    void __iomem *base;
>> -
>> -    struct clk *grf_clk;
>> -    struct clk *pllref_clk;
>> -    struct clk *pclk;
>> -    struct clk *phy_cfg_clk;
>> -
>> -    int dpms_mode;
>> -    unsigned int lane_mbps; /* per lane */
>> -    u32 channel;
>> -    u32 lanes;
>> -    u32 format;
>> -    u16 input_div;
>> -    u16 feedback_div;
>> -    unsigned long mode_flags;
>> -
>> -    const struct dw_mipi_dsi_plat_data *pdata;
>> -};
>> -
>> -enum dw_mipi_dsi_mode {
>> -    DW_MIPI_DSI_CMD_MODE,
>> -    DW_MIPI_DSI_VID_MODE,
>> -};
>> -
>> -struct dphy_pll_testdin_map {
>> -    unsigned int max_mbps;
>> -    u8 testdin;
>> -};
>> -
>> -/* The table is based on 27MHz DPHY pll reference clock. */
>> -static const struct dphy_pll_testdin_map dptdin_map[] = {
>> -    {  90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01},
>> -    { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12},
>> -    { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23},
>> -    { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15},
>> -    { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07},
>> -    { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09},
>> -    { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a},
>> -    {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
>> -    {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
>> -    {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
>> -};
>> -
>> -static int max_mbps_to_testdin(unsigned int max_mbps)
>> -{
>> -    int i;
>> -
>> -    for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
>> -        if (dptdin_map[i].max_mbps > max_mbps)
>> -            return dptdin_map[i].testdin;
>> -
>> -    return -EINVAL;
>> -}
>> -
>> -/*
>> - * The controller should generate 2 frames before
>> - * preparing the peripheral.
>> - */
>> -static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode
>> *mode)
>> -{
>> -    int refresh, two_frames;
>> -
>> -    refresh = drm_mode_vrefresh(mode);
>> -    two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
>> -    msleep(two_frames);
>> -}
>> -
>> -static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host
>> *host)
>> -{
>> -    return container_of(host, struct dw_mipi_dsi, dsi_host);
>> -}
>> -
>> -static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
>> -{
>> -    return container_of(con, struct dw_mipi_dsi, connector);
>> -}
>> -
>> -static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder
>> *encoder)
>> -{
>> -    return container_of(encoder, struct dw_mipi_dsi, encoder);
>> -}
>> -
>> -static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
>> -{
>> -    writel(val, dsi->base + reg);
>> -}
>> -
>> -static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
>> -{
>> -    return readl(dsi->base + reg);
>> -}
>> -
>> -static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8
>> test_code,
>> -                  u8 test_data)
>> -{
>> -    /*
>> -     * With the falling edge on TESTCLK, the TESTDIN[7:0] signal
>> content
>> -     * is latched internally as the current test code. Test data is
>> -     * programmed internally by rising edge on TESTCLK.
>> -     */
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
>> -
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
>> -                      PHY_TESTDIN(test_code));
>> -
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
>> -
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
>> -                      PHY_TESTDIN(test_data));
>> -
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
>> -}
>> -
>> -/**
>> - * ns2bc - Nanoseconds to byte clock cycles
>> - */
>> -static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns)
>> -{
>> -    return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
>> -}
>> -
>> -/**
>> - * ns2ui - Nanoseconds to UI time periods
>> - */
>> -static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
>> -{
>> -    return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
>> -}
>> -
>> -static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
>> -{
>> -    int ret, testdin, vco, val;
>> -
>> -    vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
>> -
>> -    testdin = max_mbps_to_testdin(dsi->lane_mbps);
>> -    if (testdin < 0) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "failed to get testdin for %dmbps lane clock\n",
>> -                  dsi->lane_mbps);
>> -        return testdin;
>> -    }
>> -
>> -    /* Start by clearing PHY state */
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
>> -    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
>> -
>> -    ret = clk_prepare_enable(dsi->phy_cfg_clk);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
>> -        return ret;
>> -    }
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
>> -                     VCO_RANGE_CON_SEL(vco) |
>> -                     VCO_IN_CAP_CON_LOW |
>> -                     REF_BIAS_CUR_SEL);
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
>> -    dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
>> -                     LPF_RESISTORS_20_KOHM);
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
>> -    dw_mipi_dsi_phy_write(dsi, 0x18,
>> LOOP_DIV_LOW_SEL(dsi->feedback_div) |
>> -                     LOW_PROGRAM_EN);
>> -    dw_mipi_dsi_phy_write(dsi, 0x18,
>> LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
>> -                     HIGH_PROGRAM_EN);
>> -    dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN |
>> PLL_INPUT_DIV_EN);
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
>> -                     BIASEXTR_SEL(BIASEXTR_127_7));
>> -    dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
>> -                     BANDGAP_SEL(BANDGAP_96_10));
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL |
>> INTERNAL_REG_CURRENT |
>> -                     BIAS_BLOCK_ON | BANDGAP_ON);
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
>> -                     SETRD_MAX | TER_RESISTORS_ON);
>> -    dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH |
>> LEVEL_SHIFTERS_ON |
>> -                     SETRD_MAX | POWER_MANAGE |
>> -                     TER_RESISTORS_ON);
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
>> -    dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi,
>> 40));
>> -    dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN |
>> ns2bc(dsi, 300));
>> -    dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi,
>> 100));
>> -    dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
>> -    dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
>> -
>> -    dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
>> -    dw_mipi_dsi_phy_write(dsi, 0x71,
>> -                  THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
>> -    dw_mipi_dsi_phy_write(dsi, 0x72,
>> -                  THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
>> -    dw_mipi_dsi_phy_write(dsi, 0x73,
>> -                  THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
>> -    dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
>> -
>> -    dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>> -                     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
>> -
>> -    ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
>> -                 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
>> -    if (ret < 0) {
>> -        DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n");
>> -        goto phy_init_end;
>> -    }
>> -
>> -    ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
>> -                 val, val & STOP_STATE_CLK_LANE, 1000,
>> -                 PHY_STATUS_TIMEOUT_US);
>> -    if (ret < 0)
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "failed to wait for phy clk lane stop state\n");
>> -
>> -phy_init_end:
>> -    clk_disable_unprepare(dsi->phy_cfg_clk);
>> -
>> -    return ret;
>> -}
>> -
>> -static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
>> -                    struct drm_display_mode *mode)
>> -{
>> -    unsigned int i, pre;
>> -    unsigned long mpclk, pllref, tmp;
>> -    unsigned int m = 1, n = 1, target_mbps = 1000;
>> -    unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) -
>> 1].max_mbps;
>> -    int bpp;
>> -
>> -    bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>> -    if (bpp < 0) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "failed to get bpp for pixel format %d\n",
>> -                  dsi->format);
>> -        return bpp;
>> -    }
>> -
>> -    mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
>> -    if (mpclk) {
>> -        /* take 1 / 0.8, since mbps must big than bandwidth of RGB */
>> -        tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
>> -        if (tmp < max_mbps)
>> -            target_mbps = tmp;
>> -        else
>> -            DRM_DEV_ERROR(dsi->dev,
>> -                      "DPHY clock frequency is out of range\n");
>> -    }
>> -
>> -    pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
>> -    tmp = pllref;
>> -
>> -    /*
>> -     * The limits on the PLL divisor are:
>> -     *
>> -     *    5MHz <= (pllref / n) <= 40MHz
>> -     *
>> -     * we walk over these values in descreasing order so that if we hit
>> -     * an exact match for target_mbps it is more likely that "m"
>> will be
>> -     * even.
>> -     *
>> -     * TODO: ensure that "m" is even after this loop.
>> -     */
>> -    for (i = pllref / 5; i > (pllref / 40); i--) {
>> -        pre = pllref / i;
>> -        if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
>> -            tmp = target_mbps % pre;
>> -            n = i;
>> -            m = target_mbps / pre;
>> -        }
>> -        if (tmp == 0)
>> -            break;
>> -    }
>> -
>> -    dsi->lane_mbps = pllref / n * m;
>> -    dsi->input_div = n;
>> -    dsi->feedback_div = m;
>> -
>> -    return 0;
>> -}
>> -
>> -static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> -                   struct mipi_dsi_device *device)
>> -{
>> -    struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> -
>> -    if (device->lanes > dsi->pdata->max_data_lanes) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "the number of data lanes(%u) is too many\n",
>> -                  device->lanes);
>> -        return -EINVAL;
>> -    }
>> -
>> -    dsi->lanes = device->lanes;
>> -    dsi->channel = device->channel;
>> -    dsi->format = device->format;
>> -    dsi->mode_flags = device->mode_flags;
>> -    dsi->panel = of_drm_find_panel(device->dev.of_node);
>> -    if (dsi->panel)
>> -        return drm_panel_attach(dsi->panel, &dsi->connector);
>> -
>> -    return -EINVAL;
>> -}
>> -
>> -static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
>> -                   struct mipi_dsi_device *device)
>> -{
>> -    struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> -
>> -    drm_panel_detach(dsi->panel);
>> -
>> -    return 0;
>> -}
>> -
>> -static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>> -                   const struct mipi_dsi_msg *msg)
>> -{
>> -    bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
>> -    u32 val = 0;
>> -
>> -    if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
>> -        val |= EN_ACK_RQST;
>> -    if (lpm)
>> -        val |= CMD_MODE_ALL_LP;
>> -
>> -    dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
>> -    dsi_write(dsi, DSI_CMD_MODE_CFG, val);
>> -}
>> -
>> -static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi,
>> u32 hdr_val)
>> -{
>> -    int ret;
>> -    u32 val, mask;
>> -
>> -    ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> -                 val, !(val & GEN_CMD_FULL), 1000,
>> -                 CMD_PKT_STATUS_TIMEOUT_US);
>> -    if (ret < 0) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "failed to get available command FIFO\n");
>> -        return ret;
>> -    }
>> -
>> -    dsi_write(dsi, DSI_GEN_HDR, hdr_val);
>> -
>> -    mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
>> -    ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> -                 val, (val & mask) == mask,
>> -                 1000, CMD_PKT_STATUS_TIMEOUT_US);
>> -    if (ret < 0) {
>> -        DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n");
>> -        return ret;
>> -    }
>> -
>> -    return 0;
>> -}
>> -
>> -static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
>> -                       const struct mipi_dsi_msg *msg)
>> -{
>> -    const u8 *tx_buf = msg->tx_buf;
>> -    u16 data = 0;
>> -    u32 val;
>> -
>> -    if (msg->tx_len > 0)
>> -        data |= tx_buf[0];
>> -    if (msg->tx_len > 1)
>> -        data |= tx_buf[1] << 8;
>> -
>> -    if (msg->tx_len > 2) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "too long tx buf length %zu for short write\n",
>> -                  msg->tx_len);
>> -        return -EINVAL;
>> -    }
>> -
>> -    val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
>> -    return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
>> -}
>> -
>> -static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
>> -                      const struct mipi_dsi_msg *msg)
>> -{
>> -    const u8 *tx_buf = msg->tx_buf;
>> -    int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
>> -    u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
>> -    u32 remainder;
>> -    u32 val;
>> -
>> -    if (msg->tx_len < 3) {
>> -        DRM_DEV_ERROR(dsi->dev,
>> -                  "wrong tx buf length %zu for long write\n",
>> -                  msg->tx_len);
>> -        return -EINVAL;
>> -    }
>> -
>> -    while (DIV_ROUND_UP(len, pld_data_bytes)) {
>> -        if (len < pld_data_bytes) {
>> -            remainder = 0;
>> -            memcpy(&remainder, tx_buf, len);
>> -            dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> -            len = 0;
>> -        } else {
>> -            memcpy(&remainder, tx_buf, pld_data_bytes);
>> -            dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> -            tx_buf += pld_data_bytes;
>> -            len -= pld_data_bytes;
>> -        }
>> -
>> -        ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> -                     val, !(val & GEN_PLD_W_FULL), 1000,
>> -                     CMD_PKT_STATUS_TIMEOUT_US);
>> -        if (ret < 0) {
>> -            DRM_DEV_ERROR(dsi->dev,
>> -                      "failed to get available write payload FIFO\n");
>> -            return ret;
>> -        }
>> -    }
>> -
>> -    return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
>> -}
>> -
>> -static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>> -                     const struct mipi_dsi_msg *msg)
>> -{
>> -    struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> -    int ret;
>> -
>> -    dw_mipi_message_config(dsi, msg);
>> -
>> -    switch (msg->type) {
>> -    case MIPI_DSI_DCS_SHORT_WRITE:
>> -    case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> -    case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> -        ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
>> -        break;
>> -    case MIPI_DSI_DCS_LONG_WRITE:
>> -        ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
>> -        break;
>> -    default:
>> -        DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n",
>> -                  msg->type);
>> -        ret = -EINVAL;
>> -    }
>> -
>> -    return ret;
>> -}
>> -
>> -static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
>> -    .attach = dw_mipi_dsi_host_attach,
>> -    .detach = dw_mipi_dsi_host_detach,
>> -    .transfer = dw_mipi_dsi_host_transfer,
>> -};
>> -
>> -static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> -{
>> -    u32 val;
>> -
>> -    val = ENABLE_LOW_POWER;
>> -
>> -    if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> -        val |= VID_MODE_TYPE_BURST;
>> -    else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
>> -        val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
>> -    else
>> -        val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>> -
>> -    dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> -}
>> -
>> -static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
>> -                 enum dw_mipi_dsi_mode mode)
>> -{
>> -    if (mode == DW_MIPI_DSI_CMD_MODE) {
>> -        dsi_write(dsi, DSI_PWR_UP, RESET);
>> -        dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> -        dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> -    } else {
>> -        dsi_write(dsi, DSI_PWR_UP, RESET);
>> -        dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
>> -        dw_mipi_dsi_video_mode_config(dsi);
>> -        dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> -        dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> -    }
>> -}
>> -
>> -static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_write(dsi, DSI_PWR_UP, RESET);
>> -    dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
>> -}
>> -
>> -static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>> -{
>> -    /*
>> -     * The maximum permitted escape clock is 20MHz and it is derived
>> from
>> -     * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
>> -     *
>> -     *     (lane_mbps >> 3) / esc_clk_division < 20
>> -     * which is:
>> -     *     (lane_mbps >> 3) / 20 > esc_clk_division
>> -     */
>> -    u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
>> -
>> -    dsi_write(dsi, DSI_PWR_UP, RESET);
>> -    dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
>> -          | PHY_RSTZ | PHY_SHUTDOWNZ);
>> -    dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
>> -          TX_ESC_CLK_DIVIDSION(esc_clk_division));
>> -}
>> -
>> -static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>> -                   struct drm_display_mode *mode)
>> -{
>> -    u32 val = 0, color = 0;
>> -
>> -    switch (dsi->format) {
>> -    case MIPI_DSI_FMT_RGB888:
>> -        color = DPI_COLOR_CODING_24BIT;
>> -        break;
>> -    case MIPI_DSI_FMT_RGB666:
>> -        color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
>> -        break;
>> -    case MIPI_DSI_FMT_RGB666_PACKED:
>> -        color = DPI_COLOR_CODING_18BIT_1;
>> -        break;
>> -    case MIPI_DSI_FMT_RGB565:
>> -        color = DPI_COLOR_CODING_16BIT_1;
>> -        break;
>> -    }
>> -
>> -    if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> -        val |= VSYNC_ACTIVE_LOW;
>> -    if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> -        val |= HSYNC_ACTIVE_LOW;
>> -
>> -    dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
>> -    dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
>> -    dsi_write(dsi, DSI_DPI_CFG_POL, val);
>> -    dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
>> -          | INVACT_LPCMD_TIME(4));
>> -}
>> -
>> -static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
>> -}
>> -
>> -static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>> -                        struct drm_display_mode *mode)
>> -{
>> -    dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
>> -}
>> -
>> -static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) |
>> LPRX_TO_CNT(1000));
>> -    dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
>> -    dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> -}
>> -
>> -/* Get lane byte clock cycles. */
>> -static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
>> -                       struct drm_display_mode *mode,
>> -                       u32 hcomponent)
>> -{
>> -    u32 frac, lbcc;
>> -
>> -    lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
>> -
>> -    frac = lbcc % mode->clock;
>> -    lbcc = lbcc / mode->clock;
>> -    if (frac)
>> -        lbcc++;
>> -
>> -    return lbcc;
>> -}
>> -
>> -static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
>> -                      struct drm_display_mode *mode)
>> -{
>> -    u32 htotal, hsa, hbp, lbcc;
>> -
>> -    htotal = mode->htotal;
>> -    hsa = mode->hsync_end - mode->hsync_start;
>> -    hbp = mode->htotal - mode->hsync_end;
>> -
>> -    lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
>> -    dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
>> -
>> -    lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
>> -    dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
>> -
>> -    lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
>> -    dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
>> -}
>> -
>> -static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
>> -                           struct drm_display_mode *mode)
>> -{
>> -    u32 vactive, vsa, vfp, vbp;
>> -
>> -    vactive = mode->vdisplay;
>> -    vsa = mode->vsync_end - mode->vsync_start;
>> -    vfp = mode->vsync_start - mode->vdisplay;
>> -    vbp = mode->vtotal - mode->vsync_end;
>> -
>> -    dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
>> -    dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
>> -    dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
>> -    dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
>> -}
>> -
>> -static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>> -          | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>> -
>> -    dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>> -          | PHY_CLKLP2HS_TIME(0x40));
>> -}
>> -
>> -static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
>> -          N_LANES(dsi->lanes));
>> -}
>> -
>> -static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>> -{
>> -    dsi_read(dsi, DSI_INT_ST0);
>> -    dsi_read(dsi, DSI_INT_ST1);
>> -    dsi_write(dsi, DSI_INT_MSK0, 0);
>> -    dsi_write(dsi, DSI_INT_MSK1, 0);
>> -}
>> -
>> -static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
>> -{
>> -    struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
>> -
>> -    if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
>> -        return;
>> -
>> -    if (clk_prepare_enable(dsi->pclk)) {
>> -        DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
>> -        return;
>> -    }
>> -
>> -    drm_panel_disable(dsi->panel);
>> -
>> -    dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> -    drm_panel_unprepare(dsi->panel);
>> -
>> -    dw_mipi_dsi_disable(dsi);
>> -    pm_runtime_put(dsi->dev);
>> -    clk_disable_unprepare(dsi->pclk);
>> -    dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> -}
>> -
>> -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
>> -{
>> -    struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
>> -    struct drm_display_mode *mode =
>> &encoder->crtc->state->adjusted_mode;
>> -    const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
>> -    int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node,
>> encoder);
>> -    u32 val;
>> -    int ret;
>> -
>> -    ret = dw_mipi_dsi_get_lane_bps(dsi, mode);
>> -    if (ret < 0)
>> -        return;
>> -
>> -    if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
>> -        return;
>> -
>> -    if (clk_prepare_enable(dsi->pclk)) {
>> -        DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
>> -        return;
>> -    }
>> -
>> -    pm_runtime_get_sync(dsi->dev);
>> -    dw_mipi_dsi_init(dsi);
>> -    dw_mipi_dsi_dpi_config(dsi, mode);
>> -    dw_mipi_dsi_packet_handler_config(dsi);
>> -    dw_mipi_dsi_video_mode_config(dsi);
>> -    dw_mipi_dsi_video_packet_config(dsi, mode);
>> -    dw_mipi_dsi_command_mode_config(dsi);
>> -    dw_mipi_dsi_line_timer_config(dsi, mode);
>> -    dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> -    dw_mipi_dsi_dphy_timing_config(dsi);
>> -    dw_mipi_dsi_dphy_interface_config(dsi);
>> -    dw_mipi_dsi_clear_err(dsi);
>> -
>> -    /*
>> -     * For the RK3399, the clk of grf must be enabled before writing
>> grf
>> -     * register. And for RK3288 or other soc, this grf_clk must be
>> NULL,
>> -     * the clk_prepare_enable return true directly.
>> -     */
>> -    ret = clk_prepare_enable(dsi->grf_clk);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
>> -        return;
>> -    }
>> -
>> -    if (pdata->grf_dsi0_mode_reg)
>> -        regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
>> -                 pdata->grf_dsi0_mode);
>> -
>> -    dw_mipi_dsi_phy_init(dsi);
>> -    dw_mipi_dsi_wait_for_two_frames(mode);
>> -
>> -    dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> -    if (drm_panel_prepare(dsi->panel))
>> -        DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n");
>> -
>> -    dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>> -    drm_panel_enable(dsi->panel);
>> -
>> -    clk_disable_unprepare(dsi->pclk);
>> -
>> -    if (mux)
>> -        val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16);
>> -    else
>> -        val = pdata->dsi0_en_bit << 16;
>> -
>> -    regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
>> -    DRM_DEV_DEBUG(dsi->dev,
>> -              "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
>> -    dsi->dpms_mode = DRM_MODE_DPMS_ON;
>> -
>> -    clk_disable_unprepare(dsi->grf_clk);
>> -}
>> -
>> -static int
>> -dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
>> -                 struct drm_crtc_state *crtc_state,
>> -                 struct drm_connector_state *conn_state)
>> -{
>> -    struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
>> -    struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
>> -
>> -    switch (dsi->format) {
>> -    case MIPI_DSI_FMT_RGB888:
>> -        s->output_mode = ROCKCHIP_OUT_MODE_P888;
>> -        break;
>> -    case MIPI_DSI_FMT_RGB666:
>> -        s->output_mode = ROCKCHIP_OUT_MODE_P666;
>> -        break;
>> -    case MIPI_DSI_FMT_RGB565:
>> -        s->output_mode = ROCKCHIP_OUT_MODE_P565;
>> -        break;
>> -    default:
>> -        WARN_ON(1);
>> -        return -EINVAL;
>> -    }
>> -
>> -    s->output_type = DRM_MODE_CONNECTOR_DSI;
>> -
>> -    return 0;
>> -}
>> -
>> -static const struct drm_encoder_helper_funcs
>> -dw_mipi_dsi_encoder_helper_funcs = {
>> -    .enable = dw_mipi_dsi_encoder_enable,
>> -    .disable = dw_mipi_dsi_encoder_disable,
>> -    .atomic_check = dw_mipi_dsi_encoder_atomic_check,
>> -};
>> -
>> -static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
>> -    .destroy = drm_encoder_cleanup,
>> -};
>> -
>> -static int dw_mipi_dsi_connector_get_modes(struct drm_connector
>> *connector)
>> -{
>> -    struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> -
>> -    return drm_panel_get_modes(dsi->panel);
>> -}
>> -
>> -static struct drm_connector_helper_funcs
>> dw_mipi_dsi_connector_helper_funcs = {
>> -    .get_modes = dw_mipi_dsi_connector_get_modes,
>> -};
>> -
>> -static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector
>> *connector)
>> -{
>> -    drm_connector_unregister(connector);
>> -    drm_connector_cleanup(connector);
>> -}
>> -
>> -static const struct drm_connector_funcs
>> dw_mipi_dsi_atomic_connector_funcs = {
>> -    .fill_modes = drm_helper_probe_single_connector_modes,
>> -    .destroy = dw_mipi_dsi_drm_connector_destroy,
>> -    .reset = drm_atomic_helper_connector_reset,
>> -    .atomic_duplicate_state =
>> drm_atomic_helper_connector_duplicate_state,
>> -    .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> -};
>> -
>> -static int dw_mipi_dsi_register(struct drm_device *drm,
>> -                struct dw_mipi_dsi *dsi)
>> -{
>> -    struct drm_encoder *encoder = &dsi->encoder;
>> -    struct drm_connector *connector = &dsi->connector;
>> -    struct device *dev = dsi->dev;
>> -    int ret;
>> -
>> -    encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
>> -                                 dev->of_node);
>> -    /*
>> -     * If we failed to find the CRTC(s) which this encoder is
>> -     * supposed to be connected to, it's because the CRTC has
>> -     * not been registered yet.  Defer probing, and hope that
>> -     * the required CRTC is added later.
>> -     */
>> -    if (encoder->possible_crtcs == 0)
>> -        return -EPROBE_DEFER;
>> -
>> -    drm_encoder_helper_add(&dsi->encoder,
>> -                   &dw_mipi_dsi_encoder_helper_funcs);
>> -    ret = drm_encoder_init(drm, &dsi->encoder,
>> &dw_mipi_dsi_encoder_funcs,
>> -                   DRM_MODE_ENCODER_DSI, NULL);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n");
>> -        return ret;
>> -    }
>> -
>> -    drm_connector_helper_add(connector,
>> -                 &dw_mipi_dsi_connector_helper_funcs);
>> -
>> -    drm_connector_init(drm, &dsi->connector,
>> -               &dw_mipi_dsi_atomic_connector_funcs,
>> -               DRM_MODE_CONNECTOR_DSI);
>> -
>> -    drm_mode_connector_attach_encoder(connector, encoder);
>> -
>> -    return 0;
>> -}
>> -
>> -static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
>> -{
>> -    struct device_node *np = dsi->dev->of_node;
>> -
>> -    dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np,
>> "rockchip,grf");
>> -    if (IS_ERR(dsi->grf_regmap)) {
>> -        DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
>> -        return PTR_ERR(dsi->grf_regmap);
>> -    }
>> -
>> -    return 0;
>> -}
>> -
>> -static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
>> -    .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
>> -    .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
>> -    .grf_switch_reg = RK3288_GRF_SOC_CON6,
>> -    .max_data_lanes = 4,
>> -};
>> -
>> -static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
>> -    .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
>> -    .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
>> -    .grf_switch_reg = RK3399_GRF_SOC_CON20,
>> -    .grf_dsi0_mode = RK3399_GRF_DSI_MODE,
>> -    .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
>> -    .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
>> -    .max_data_lanes = 4,
>> -};
>> -
>> -static const struct of_device_id dw_mipi_dsi_dt_ids[] = {
>> -    {
>> -     .compatible = "rockchip,rk3288-mipi-dsi",
>> -     .data = &rk3288_mipi_dsi_drv_data,
>> -    }, {
>> -     .compatible = "rockchip,rk3399-mipi-dsi",
>> -     .data = &rk3399_mipi_dsi_drv_data,
>> -    },
>> -    { /* sentinel */ }
>> -};
>> -MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids);
>> -
>> -static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>> -                void *data)
>> -{
>> -    const struct of_device_id *of_id =
>> -            of_match_device(dw_mipi_dsi_dt_ids, dev);
>> -    const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
>> -    struct platform_device *pdev = to_platform_device(dev);
>> -    struct reset_control *apb_rst;
>> -    struct drm_device *drm = data;
>> -    struct dw_mipi_dsi *dsi;
>> -    struct resource *res;
>> -    int ret;
>> -
>> -    dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> -    if (!dsi)
>> -        return -ENOMEM;
>> -
>> -    dsi->dev = dev;
>> -    dsi->pdata = pdata;
>> -    dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> -
>> -    ret = rockchip_mipi_parse_dt(dsi);
>> -    if (ret)
>> -        return ret;
>> -
>> -    res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -    if (!res)
>> -        return -ENODEV;
>> -
>> -    dsi->base = devm_ioremap_resource(dev, res);
>> -    if (IS_ERR(dsi->base))
>> -        return PTR_ERR(dsi->base);
>> -
>> -    dsi->pllref_clk = devm_clk_get(dev, "ref");
>> -    if (IS_ERR(dsi->pllref_clk)) {
>> -        ret = PTR_ERR(dsi->pllref_clk);
>> -        DRM_DEV_ERROR(dev,
>> -                  "Unable to get pll reference clock: %d\n", ret);
>> -        return ret;
>> -    }
>> -
>> -    dsi->pclk = devm_clk_get(dev, "pclk");
>> -    if (IS_ERR(dsi->pclk)) {
>> -        ret = PTR_ERR(dsi->pclk);
>> -        DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret);
>> -        return ret;
>> -    }
>> -
>> -    /*
>> -     * Note that the reset was not defined in the initial device
>> tree, so
>> -     * we have to be prepared for it not being found.
>> -     */
>> -    apb_rst = devm_reset_control_get(dev, "apb");
>> -    if (IS_ERR(apb_rst)) {
>> -        ret = PTR_ERR(apb_rst);
>> -        if (ret == -ENOENT) {
>> -            apb_rst = NULL;
>> -        } else {
>> -            DRM_DEV_ERROR(dev,
>> -                      "Unable to get reset control: %d\n", ret);
>> -            return ret;
>> -        }
>> -    }
>> -
>> -    if (apb_rst) {
>> -        ret = clk_prepare_enable(dsi->pclk);
>> -        if (ret) {
>> -            DRM_DEV_ERROR(dev, "Failed to enable pclk\n");
>> -            return ret;
>> -        }
>> -
>> -        reset_control_assert(apb_rst);
>> -        usleep_range(10, 20);
>> -        reset_control_deassert(apb_rst);
>> -
>> -        clk_disable_unprepare(dsi->pclk);
>> -    }
>> -
>> -    if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
>> -        dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
>> -        if (IS_ERR(dsi->phy_cfg_clk)) {
>> -            ret = PTR_ERR(dsi->phy_cfg_clk);
>> -            DRM_DEV_ERROR(dev,
>> -                      "Unable to get phy_cfg_clk: %d\n", ret);
>> -            return ret;
>> -        }
>> -    }
>> -
>> -    if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) {
>> -        dsi->grf_clk = devm_clk_get(dev, "grf");
>> -        if (IS_ERR(dsi->grf_clk)) {
>> -            ret = PTR_ERR(dsi->grf_clk);
>> -            DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
>> -            return ret;
>> -        }
>> -    }
>> -
>> -    ret = clk_prepare_enable(dsi->pllref_clk);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n");
>> -        return ret;
>> -    }
>> -
>> -    ret = dw_mipi_dsi_register(drm, dsi);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret);
>> -        goto err_pllref;
>> -    }
>> -
>> -    pm_runtime_enable(dev);
>> -
>> -    dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> -    dsi->dsi_host.dev = dev;
>> -    ret = mipi_dsi_host_register(&dsi->dsi_host);
>> -    if (ret) {
>> -        DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
>> -        goto err_cleanup;
>> -    }
>> -
>> -    if (!dsi->panel) {
>> -        ret = -EPROBE_DEFER;
>> -        goto err_mipi_dsi_host;
>> -    }
>> -
>> -    dev_set_drvdata(dev, dsi);
>> -    return 0;
>> -
>> -err_mipi_dsi_host:
>> -    mipi_dsi_host_unregister(&dsi->dsi_host);
>> -err_cleanup:
>> -    drm_encoder_cleanup(&dsi->encoder);
>> -    drm_connector_cleanup(&dsi->connector);
>> -err_pllref:
>> -    clk_disable_unprepare(dsi->pllref_clk);
>> -    return ret;
>> -}
>> -
>> -static void dw_mipi_dsi_unbind(struct device *dev, struct device
>> *master,
>> -                   void *data)
>> -{
>> -    struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
>> -
>> -    mipi_dsi_host_unregister(&dsi->dsi_host);
>> -    pm_runtime_disable(dev);
>> -    clk_disable_unprepare(dsi->pllref_clk);
>> -}
>> -
>> -static const struct component_ops dw_mipi_dsi_ops = {
>> -    .bind    = dw_mipi_dsi_bind,
>> -    .unbind    = dw_mipi_dsi_unbind,
>> -};
>> -
>> -static int dw_mipi_dsi_probe(struct platform_device *pdev)
>> -{
>> -    return component_add(&pdev->dev, &dw_mipi_dsi_ops);
>> -}
>> -
>> -static int dw_mipi_dsi_remove(struct platform_device *pdev)
>> -{
>> -    component_del(&pdev->dev, &dw_mipi_dsi_ops);
>> -    return 0;
>> -}
>> -
>> -struct platform_driver dw_mipi_dsi_driver = {
>> -    .probe        = dw_mipi_dsi_probe,
>> -    .remove        = dw_mipi_dsi_remove,
>> -    .driver        = {
>> -        .of_match_table = dw_mipi_dsi_dt_ids,
>> -        .name    = DRIVER_NAME,
>> -    },
>> -};
>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
>> b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
>> new file mode 100644
>> index 0000000..c919d4f
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c
>> @@ -0,0 +1,756 @@
>> +/*
>> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
>> + * Author:
>> + *      Chris Zhong <zyw@rock-chips.com>
>> + *      Nickey Yang <nickey.yang@rock-chips.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>> + *
>> + * License terms:  GNU General Public License (GPL), version 2
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/math64.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +#include <linux/regmap.h>
>> +#include <drm/drm_of.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#define DSI_PHY_TST_CTRL0        0xb4
>> +#define PHY_TESTCLK            BIT(1)
>> +#define PHY_UNTESTCLK            0
>> +#define PHY_TESTCLR            BIT(0)
>> +#define PHY_UNTESTCLR            0
>> +
>> +#define DSI_PHY_TST_CTRL1        0xb8
>> +#define PHY_TESTEN            BIT(16)
>> +#define PHY_UNTESTEN            0
>> +#define PHY_TESTDOUT(n)            (((n) & 0xff) << 8)
>> +#define PHY_TESTDIN(n)            (((n) & 0xff) << 0)
>> +
>> +#define BYPASS_VCO_RANGE    BIT(7)
>> +#define VCO_RANGE_CON_SEL(val)    (((val) & 0x7) << 3)
>> +#define VCO_IN_CAP_CON_DEFAULT    (0x0 << 1)
>> +#define VCO_IN_CAP_CON_LOW    (0x1 << 1)
>> +#define VCO_IN_CAP_CON_HIGH    (0x2 << 1)
>> +#define REF_BIAS_CUR_SEL    BIT(0)
>> +
>> +#define CP_CURRENT_3UA    0x1
>> +#define CP_CURRENT_4_5UA    0x2
>> +#define CP_CURRENT_7_5UA    0x6
>> +#define CP_CURRENT_6UA    0x9
>> +#define CP_CURRENT_12UA    0xb
>> +#define CP_CURRENT_SEL(val)    ((val) & 0xf)
>> +#define CP_PROGRAM_EN        BIT(7)
>> +
>> +#define LPF_RESISTORS_15_5KOHM    0x1
>> +#define LPF_RESISTORS_13KOHM    0x2
>> +#define LPF_RESISTORS_11_5KOHM    0x4
>> +#define LPF_RESISTORS_10_5KOHM    0x8
>> +#define LPF_RESISTORS_8KOHM    0x10
>> +#define LPF_PROGRAM_EN        BIT(6)
>> +#define LPF_RESISTORS_SEL(val)    ((val) & 0x3f)
>> +
>> +#define HSFREQRANGE_SEL(val)    (((val) & 0x3f) << 1)
>> +
>> +#define INPUT_DIVIDER(val)    (((val) - 1) & 0x7f)
>> +#define LOW_PROGRAM_EN        0
>> +#define HIGH_PROGRAM_EN        BIT(7)
>> +#define LOOP_DIV_LOW_SEL(val)    (((val) - 1) & 0x1f)
>> +#define LOOP_DIV_HIGH_SEL(val)    ((((val) - 1) >> 5) & 0xf)
>> +#define PLL_LOOP_DIV_EN        BIT(5)
>> +#define PLL_INPUT_DIV_EN    BIT(4)
>> +
>> +#define POWER_CONTROL        BIT(6)
>> +#define INTERNAL_REG_CURRENT    BIT(3)
>> +#define BIAS_BLOCK_ON        BIT(2)
>> +#define BANDGAP_ON        BIT(0)
>> +
>> +#define TER_RESISTOR_HIGH    BIT(7)
>> +#define    TER_RESISTOR_LOW    0
>> +#define LEVEL_SHIFTERS_ON    BIT(6)
>> +#define TER_CAL_DONE        BIT(5)
>> +#define SETRD_MAX        (0x7 << 2)
>> +#define POWER_MANAGE        BIT(1)
>> +#define TER_RESISTORS_ON    BIT(0)
>> +
>> +#define BIASEXTR_SEL(val)    ((val) & 0x7)
>> +#define BANDGAP_SEL(val)    ((val) & 0x7)
>> +#define TLP_PROGRAM_EN        BIT(7)
>> +#define THS_PRE_PROGRAM_EN    BIT(7)
>> +#define THS_ZERO_PROGRAM_EN    BIT(6)
>> +
>> +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL    0x10
>> +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS    0x11
>> +#define PLL_LPF_AND_CP_CONTROL    0x12
>> +#define PLL_INPUT_DIVIDER_RATIO    0x17
>> +#define PLL_LOOP_DIVIDER_RATIO    0x18
>> +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL    0x19
>> +#define BANDGAP_AND_BIAS_CONTROL    0x20
>> +#define TERMINATION_RESISTER_CONTROL    0x21
>> +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY    0x22
>> +#define HS_RX_CONTROL_OF_LANE_0    0x44
>> +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL    0x60
>> +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL    0x61
>> +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL    0x62
>> +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL    0x63
>> +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL    0x64
>> +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL    0x65
>> +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL    0x70
>> +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL    0x71
>> +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL    0x72
>> +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL    0x73
>> +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL    0x74
>> +
>> +#define DW_MIPI_NEEDS_PHY_CFG_CLK    BIT(0)
>> +#define DW_MIPI_NEEDS_GRF_CLK        BIT(1)
>> +
>> +#define RK3288_GRF_SOC_CON6        0x025c
>> +#define RK3288_DSI0_SEL_VOP_LIT        BIT(6)
>> +#define RK3288_DSI1_SEL_VOP_LIT        BIT(9)
>> +
>> +#define RK3399_GRF_SOC_CON20        0x6250
>> +#define RK3399_DSI0_SEL_VOP_LIT        BIT(0)
>> +#define RK3399_DSI1_SEL_VOP_LIT        BIT(4)
>> +
>> +/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
>> +#define RK3399_GRF_SOC_CON22        0x6258
>> +#define RK3399_GRF_DSI_MODE        0xffff0000
>> +
>> +#define to_dsi(nm)    container_of(nm, struct dw_mipi_dsi_rockchip, nm)
>> +
>> +enum {
>> +    BANDGAP_97_07,
>> +    BANDGAP_98_05,
>> +    BANDGAP_99_02,
>> +    BANDGAP_100_00,
>> +    BANDGAP_93_17,
>> +    BANDGAP_94_15,
>> +    BANDGAP_95_12,
>> +    BANDGAP_96_10,
>> +};
>> +
>> +enum {
>> +    BIASEXTR_87_1,
>> +    BIASEXTR_91_5,
>> +    BIASEXTR_95_9,
>> +    BIASEXTR_100,
>> +    BIASEXTR_105_94,
>> +    BIASEXTR_111_88,
>> +    BIASEXTR_118_8,
>> +    BIASEXTR_127_7,
>> +};
>> +
>> +struct rockchip_dw_dsi_chip_data {
>> +    u32 dsi0_en_bit;
>> +    u32 dsi1_en_bit;
>> +    u32 grf_switch_reg;
>> +    u32 grf_dsi0_mode;
>> +    u32 grf_dsi0_mode_reg;
>> +    unsigned int flags;
>> +    unsigned int max_data_lanes;
>> +};
>> +
>> +struct dw_mipi_dsi_rockchip {
>> +    struct device *dev;
>> +    struct drm_encoder encoder;
>> +    void __iomem *base;
>> +
>> +    struct regmap *grf_regmap;
>> +    struct clk *pllref_clk;
>> +    struct clk *grf_clk;
>> +    struct clk *phy_cfg_clk;
>> +
>> +    unsigned int lane_mbps; /* per lane */
>> +    u16 input_div;
>> +    u16 feedback_div;
>> +    u32 format;
>> +
>> +    const struct rockchip_dw_dsi_chip_data *cdata;
>> +    struct dw_mipi_dsi_plat_data pdata;
>> +};
>> +
>> +struct dphy_pll_parameter_map {
>> +    unsigned int max_mbps;
>> +    u8 hsfreqrange;
>> +    u8 icpctrl;
>> +    u8 lpfctrl;
>> +};
>> +
>> +/* The table is based on 27MHz DPHY pll reference clock. */
>> +static const struct dphy_pll_parameter_map dppa_map[] = {
>> +    {  89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM},
>> +    {  99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM},
>> +    { 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM},
>> +    { 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM},
>> +    { 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM},
>> +    { 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM},
>> +    { 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM},
>> +    { 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM},
>> +    { 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM},
>> +    { 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM},
>> +    { 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM},
>> +    { 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM},
>> +    { 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM},
>> +    { 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM},
>> +    { 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM},
>> +    { 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM},
>> +    { 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM},
>> +    {1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM},
>> +    {1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM},
>> +    {1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM},
>> +    {1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}
>
> minor nit: you should leave a space before the closing brace '}'.
>
>> +};
>> +
>> +static int max_mbps_to_parameter(unsigned int max_mbps)
>> +{
>> +    int i;
>> +
>> +    for (i = 0; i < ARRAY_SIZE(dppa_map); i++)
>> +        if (dppa_map[i].max_mbps >= max_mbps)
>> +            return i;
>> +
>> +    return -EINVAL;
>> +}
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32
>> reg, u32 val)
>> +{
>> +    writel(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg)
>> +{
>> +    return readl(dsi->base + reg);
>> +}
>> +
>> +static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32
>> reg, u32 mask)
>> +{
>> +    dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
>> +}
>> +
>> +static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi,
>> u32 reg,
>> +                   u32 mask, u32 val)
>> +{
>> +    dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
>> +}
>> +
>> +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi,
>> +                  u8 test_code,
>> +                  u8 test_data)
>> +{
>> +    /*
>> +     * With the falling edge on TESTCLK, the TESTDIN[7:0] signal
>> content
>> +     * is latched internally as the current test code. Test data is
>> +     * programmed internally by rising edge on TESTCLK.
>> +     */
>> +    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
>> +
>> +    dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
>> +                      PHY_TESTDIN(test_code));
>> +
>> +    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
>> +
>> +    dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
>> +                      PHY_TESTDIN(test_data));
>> +
>> +    dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
>> +}
>> +
>> +/**
>> + * ns2bc - Nanoseconds to byte clock cycles
>> + */
>> +static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi,
>> int ns)
>> +{
>> +    return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
>> +}
>> +
>> +/**
>> + * ns2ui - Nanoseconds to UI time periods
>> + */
>> +static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi,
>> int ns)
>> +{
>> +    return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000);
>> +}
>> +
>> +static int dw_mipi_dsi_phy_init(void *priv_data)
>> +{
>> +    struct dw_mipi_dsi_rockchip *dsi = priv_data;
>> +    int ret, i, vco;
>> +
>> +    vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
>> +
>> +    i = max_mbps_to_parameter(dsi->lane_mbps);
>> +    if (i < 0) {
>> +        DRM_DEV_ERROR(dsi->dev,
>> +                  "failed to get parameter for %dmbps clock\n",
>> +                  dsi->lane_mbps);
>> +        return i;
>> +    }
>> +
>> +    ret = clk_prepare_enable(dsi->phy_cfg_clk);
>> +    if (ret) {
>> +        DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
>> +        return ret;
>> +    }
>> +
>> +    dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
>> +                  BYPASS_VCO_RANGE |
>> +                  VCO_RANGE_CON_SEL(vco) |
>> +                  VCO_IN_CAP_CON_LOW |
>> +                  REF_BIAS_CUR_SEL);
>> +
>> +    dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
>> +                  CP_CURRENT_SEL(dppa_map[i].icpctrl));
>> +    dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
>> +                  CP_PROGRAM_EN | LPF_PROGRAM_EN |
>> +                  LPF_RESISTORS_SEL(dppa_map[i].lpfctrl));
>> +
>> +    dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
>> +                  HSFREQRANGE_SEL(dppa_map[i].hsfreqrange));
>> +
>> +    dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
>> +                  INPUT_DIVIDER(dsi->input_div));
>> +    dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
>> +                  LOOP_DIV_LOW_SEL(dsi->feedback_div) |
>> +                  LOW_PROGRAM_EN);
>> +    /*
>> +     * We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL
>> immediately
>> +     * to make the configured LSB effective according to IP simulation
>> +     * and lab test results.
>> +     * Only in this way can we get correct mipi phy pll frequency.
>> +     */
>> +    dw_mipi_dsi_phy_write(dsi,
>> PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
>> +                  PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
>> +    dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
>> +                  LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
>> +                  HIGH_PROGRAM_EN);
>> +    dw_mipi_dsi_phy_write(dsi,
>> PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
>> +                  PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
>> +
>> +    dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
>> +                  LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
>> +    dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
>> +                  HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
>> +
>> +    dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
>> +                  POWER_CONTROL | INTERNAL_REG_CURRENT |
>> +                  BIAS_BLOCK_ON | BANDGAP_ON);
>> +
>> +    dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
>> +                  TER_RESISTOR_LOW | TER_CAL_DONE |
>> +                  SETRD_MAX | TER_RESISTORS_ON);
>> +    dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
>> +                  TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
>> +                  SETRD_MAX | POWER_MANAGE |
>> +                  TER_RESISTORS_ON);
>> +
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
>> +                  TLP_PROGRAM_EN | ns2bc(dsi, 500));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
>> +                  THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
>> +                  THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
>> +                  THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
>> +                  BIT(5) | ns2bc(dsi, 100));
>> +    dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
>> +                  BIT(5) | (ns2bc(dsi, 60) + 7));
>> +
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
>> +                  TLP_PROGRAM_EN | ns2bc(dsi, 500));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
>> +                  THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
>> +                  THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
>> +    dw_mipi_dsi_phy_write(dsi,
>> HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
>> +                  THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
>> +    dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
>> +                  BIT(5) | ns2bc(dsi, 100));
>> +
>> +    clk_disable_unprepare(dsi->phy_cfg_clk);
>> +
>> +    return ret;
>> +}
>> +
>> +static int
>> +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode
>> *mode,
>> +              unsigned long mode_flags, u32 lanes, u32 format,
>> +              unsigned int *lane_mbps)
>> +{
>> +    struct dw_mipi_dsi_rockchip *dsi = priv_data;
>> +    int bpp;
>> +    unsigned long mpclk, tmp;
>> +    unsigned int target_mbps = 1000;
>> +    unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) -
>> 1].max_mbps;
>> +    unsigned long best_freq = 0;
>> +    unsigned long fvco_min, fvco_max, fin, fout;
>> +    unsigned int min_prediv, max_prediv;
>> +    unsigned int _prediv, uninitialized_var(best_prediv);
>> +    unsigned long _fbdiv, uninitialized_var(best_fbdiv);
>> +    unsigned long min_delta = ULONG_MAX;
>> +
>> +    dsi->format = format;
>> +    bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>> +    if (bpp < 0) {
>> +        DRM_DEV_ERROR(dsi->dev,
>> +                  "failed to get bpp for pixel format %d\n",
>> +                  dsi->format);
>> +        return bpp;
>> +    }
>> +
>> +    mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
>> +    if (mpclk) {
>> +        /* take 1 / 0.8, since mbps must big than bandwidth of RGB */
>> +        tmp = mpclk * (bpp / lanes) * 10 / 8;
>> +        if (tmp < max_mbps)
>> +            target_mbps = tmp;
>> +        else
>> +            DRM_DEV_ERROR(dsi->dev,
>> +                      "DPHY clock frequency is out of range\n");
>> +    }
>> +
>> +    fin = clk_get_rate(dsi->pllref_clk);
>> +    fout = target_mbps * USEC_PER_SEC;
>> +
>> +    /* constraint: 5Mhz <= Fref / N <= 40MHz */
>> +    min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC);
>> +    max_prediv = fin / (5 * USEC_PER_SEC);
>> +
>> +    /* constraint: 80MHz <= Fvco <= 1500Mhz */
>> +    fvco_min = 80 * USEC_PER_SEC;
>> +    fvco_max = 1500 * USEC_PER_SEC;
>> +
>> +    for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
>> +        u64 tmp;
>> +        u32 delta;
>> +        /* Fvco = Fref * M / N */
>> +        tmp = (u64)fout * _prediv;
>> +        do_div(tmp, fin);
>> +        _fbdiv = tmp;
>> +        /*
>> +         * Due to the use of a "by 2 pre-scaler," the range of the
>> +         * feedback multiplication value M is limited to even division
>> +         * numbers, and m must be greater than 6, less than 512.
>> +         */
>> +        if (_fbdiv < 6 || _fbdiv > 512)
>> +            continue;
>> +
>> +        _fbdiv += _fbdiv % 2;
>> +
>> +        tmp = (u64)_fbdiv * fin;
>> +        do_div(tmp, _prediv);
>> +        if (tmp < fvco_min || tmp > fvco_max)
>> +            continue;
>> +
>> +        delta = abs(fout - tmp);
>> +        if (delta < min_delta) {
>> +            best_prediv = _prediv;
>> +            best_fbdiv = _fbdiv;
>> +            min_delta = delta;
>> +            best_freq = tmp;
>> +        }
>> +    }
>> +
>> +    if (best_freq) {
>> +        dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC);
>> +        *lane_mbps = dsi->lane_mbps;
>> +        dsi->input_div = best_prediv;
>> +        dsi->feedback_div = best_fbdiv;
>> +    } else {
>> +        DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n");
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops
>> = {
>> +    .init = dw_mipi_dsi_phy_init,
>> +    .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
>> +};
>> +
>> +static struct rockchip_dw_dsi_chip_data rk3288_chip_data = {
>> +    .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
>> +    .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
>> +    .grf_switch_reg = RK3288_GRF_SOC_CON6,
>> +    .max_data_lanes = 4,
>> +};
>> +
>> +static struct rockchip_dw_dsi_chip_data rk3399_chip_data = {
>> +    .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT,
>> +    .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT,
>> +    .grf_switch_reg = RK3399_GRF_SOC_CON20,
>> +    .grf_dsi0_mode = RK3399_GRF_DSI_MODE,
>> +    .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
>> +    .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
>> +    .max_data_lanes = 4,
>> +};
>> +
>> +static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = {
>> +    {
>> +     .compatible = "rockchip,rk3288-mipi-dsi",
>> +     .data = &rk3288_chip_data,
>> +    }, {
>> +     .compatible = "rockchip,rk3399-mipi-dsi",
>> +     .data = &rk3399_chip_data,
>> +    },
>> +    { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids);
>
> It would be nice to have the above 3 structs at the bottom of the file
> along with the dw_mipi_dsi_rockchip_driver struct creation. Using
> of_device_get_match_data() should avoid the need to keep the of_device_id
> table at the bottom.
Done in patch v3
>
>> +
>> +static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
>> +                         struct drm_display_mode *mode,
>> +                         struct drm_display_mode *adjusted)
>> +{
>> +    struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
>> +    const struct rockchip_dw_dsi_chip_data *cdata = dsi->cdata;
>> +    int val, ret;
>> +
>> +    ret = drm_of_encoder_active_endpoint_id(dsi->dev->of_node,
>> +                        &dsi->encoder);
>> +    if (ret < 0)
>> +        return;
>> +    /*
>> +     * For the RK3399, the clk of grf must be enabled before writing
>> grf
>> +     * register. And for RK3288 or other soc, this grf_clk must be
>> NULL,
>> +     * the clk_prepare_enable return true directly.
>> +     */
>> +    ret = clk_prepare_enable(dsi->grf_clk);
>> +    if (ret) {
>> +        DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
>> +        return;
>> +    }
>> +
>> +    val = cdata->dsi0_en_bit << 16;
>> +    if (ret)
>> +        val |= cdata->dsi0_en_bit;
>
> Is this "if (ret)" check okay here? The older code checked on a "mux"
> variable.
>
>> +    regmap_write(dsi->grf_regmap, cdata->grf_switch_reg, val);
>> +
>> +    if (cdata->grf_dsi0_mode_reg)
>> +        regmap_write(dsi->grf_regmap, cdata->grf_dsi0_mode_reg,
>> +                 cdata->grf_dsi0_mode);
>> +
>> +    clk_disable_unprepare(dsi->grf_clk);
>> +}
>> +
>> +static int
>> +dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
>> +                 struct drm_crtc_state *crtc_state,
>> +                 struct drm_connector_state *conn_state)
>> +{
>> +    struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
>> +    struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
>> +
>> +    switch (dsi->format) {
>> +    case MIPI_DSI_FMT_RGB888:
>> +        s->output_mode = ROCKCHIP_OUT_MODE_P888;
>> +        break;
>> +    case MIPI_DSI_FMT_RGB666:
>> +        s->output_mode = ROCKCHIP_OUT_MODE_P666;
>> +        break;
>> +    case MIPI_DSI_FMT_RGB565:
>> +        s->output_mode = ROCKCHIP_OUT_MODE_P565;
>> +        break;
>> +    default:
>> +        WARN_ON(1);
>> +        return -EINVAL;
>> +    }
>> +
>> +    s->output_type = DRM_MODE_CONNECTOR_DSI;
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct drm_encoder_helper_funcs
>> +dw_mipi_dsi_encoder_helper_funcs = {
>> +    .mode_set = dw_mipi_dsi_encoder_mode_set,
>
> Are we using the mode_set() encoder helper func (instead of
> enable/disable) here because
> the dw-mipi-dsi bridge driver also does the majority of the DW DSI
> controller configuration
> in the bridge's mode_set() helper?
yes, GRF should be set before bridge's mode_set().
>
>> +    .atomic_check = dw_mipi_dsi_encoder_atomic_check,
>> +};
>> +
>> +static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = {
>> +    .destroy = drm_encoder_cleanup,
>> +};
>> +
>> +static int rockchip_dsi_drm_create_encoder(struct
>> dw_mipi_dsi_rockchip *dsi,
>> +                       struct drm_device *drm_dev)
>> +{
>> +    struct drm_encoder *encoder = &dsi->encoder;
>> +    int ret;
>> +
>> +    encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
>> +                                 dsi->dev->of_node);
>> +
>> +    ret = drm_encoder_init(drm_dev, encoder,
>> &dw_mipi_dsi_encoder_funcs,
>> +                   DRM_MODE_ENCODER_DSI, NULL);
>> +    if (ret) {
>> +        DRM_ERROR("Failed to initialize encoder with drm\n");
>> +        return ret;
>> +    }
>> +
>> +    drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs);
>> +
>> +    return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_rockchip_bind(struct device *dev,
>> +                     struct device *master,
>> +                     void *data)
>> +{
>> +    const struct of_device_id *of_id =
>> +            of_match_device(dw_mipi_dsi_rockchip_dt_ids, dev);
>> +    const struct rockchip_dw_dsi_chip_data *cdata = of_id->data;
>
> You could use of_device_get_match_data() here.
>
>> +    struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
>
> I guess this needs to be fixed as Brian described in the other mail.
>
> Thanks,
> Archit
>


\
 
 \ /
  Last update: 2017-11-28 12:27    [W:0.132 / U:2.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site