lkml.org 
[lkml]   [2017]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/2] dt-bindings: watchdog: Add Spreadtrum watchdog documentation
Hi Guenter,

Thanks again for you review.
I am very glad that this patch has been accepted.

Best Regards,
Eric Long

On Mon, Nov 27, 2017 at 08:09:18PM -0800, Guenter Roeck wrote:
> On 11/27/2017 06:18 PM, Eric Long wrote:
> >This patch adds the documentation for Spreadtrum watchdog driver.
> >
> >Signed-off-by: Eric Long <eric.long@spreadtrum.com>
> >Acked-by: Rob Herring <robh@kernel.org>
>
> The patch series is in my tree, and will ultimately find its way into Wim's tree.
> No need to resend it anymore.
>
> In general, if a patch is available in
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git watchdog-next
> there is no need to resend it.
>
> Thanks,
> Guenter
>
> >---
> >Changes since v6:
> >- No updates.
> >
> >Changes since v5:
> >- No updates.
> >
> >Changes since v4:
> >- No updates.
> >
> >Changes since v3:
> >- No updates.
> >
> >Changes since v2:
> >- Add acked tag from Rob.
> >
> >Changes since v1:
> >- No updates.
> >---
> > .../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >
> >diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >new file mode 100644
> >index 0000000..aeaf3e0
> >--- /dev/null
> >+++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >@@ -0,0 +1,19 @@
> >+Spreadtrum SoCs Watchdog timer
> >+
> >+Required properties:
> >+- compatible : Should be "sprd,sp9860-wdt".
> >+- reg : Specifies base physical address and size of the registers.
> >+- interrupts : Exactly one interrupt specifier.
> >+- timeout-sec : Contain the default watchdog timeout in seconds.
> >+- clock-names : Contain the input clock names.
> >+- clocks : Phandles to input clocks.
> >+
> >+Example:
> >+ watchdog: watchdog@40310000 {
> >+ compatible = "sprd,sp9860-wdt";
> >+ reg = <0 0x40310000 0 0x1000>;
> >+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> >+ timeout-sec = <12>;
> >+ clock-names = "enable", "rtc_enable";
> >+ clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
> >+ };
> >
>

\
 
 \ /
  Last update: 2017-11-28 07:21    [W:0.029 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site