lkml.org 
[lkml]   [2017]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 01/17] drm/sun4i: Refactor DE2 code
Date
Hi!

Dne torek, 28. november 2017 ob 16:54:42 CET je Maxime Ripard napisal(a):
> Hi,
>
> On Mon, Nov 27, 2017 at 09:57:34PM +0100, Jernej Skrabec wrote:
> > Since the time initial DE2 driver was written, some knowledge was gained
> > what setting are really necessary and what most of the magic values
> > mean.
> >
> > This commit renames some of the macro names to better fit the real
> > meaning, replace default values with self explaining macros where
> > possible and removes settings which are not really needed.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
>
> While those changes are quite welcome, it should be split in a number
> of patches...

You're right, I went over the changes again and now I have 8 patches instead
of one with much more explanation why each change is needed.

I'll send v2 as soon as I get some feedback on rest of the series.

Regards,
Jernej

>
> > ---
> >
> > drivers/gpu/drm/sun4i/sun8i_mixer.c | 65
> > +++++++++++++++++++------------------
> > drivers/gpu/drm/sun4i/sun8i_mixer.h | 31 ++++++++----------
> > 2 files changed, 47 insertions(+), 49 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > b/drivers/gpu/drm/sun4i/sun8i_mixer.c index cb193c5f1686..015943c0ed5a
> > 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > @@ -44,7 +44,8 @@ void sun8i_mixer_layer_enable(struct sun8i_mixer *mixer,
> >
> > /* Currently the first UI channel is used */
> > int chan = mixer->cfg->vi_num;
> >
> > - DRM_DEBUG_DRIVER("Enabling layer %d in channel %d\n", layer, chan);
> > + DRM_DEBUG_DRIVER("%sabling layer %d in channel %d\n",
> > + enable ? "En" : "Dis", layer, chan);
> >
> > if (enable)
> >
> > val = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN;
> >
> > @@ -55,15 +56,14 @@ void sun8i_mixer_layer_enable(struct sun8i_mixer
> > *mixer,>
> > SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
> > SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
> >
> > - /* Set the alpha configuration */
> > - regmap_update_bits(mixer->engine.regs,
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_MASK,
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_DEF);
> > + if (enable)
> > + val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(chan);
> > + else
> > + val = 0;
> > +
> >
> > regmap_update_bits(mixer->engine.regs,
> >
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MASK,
> > - SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_DEF);
> > + SUN8I_MIXER_BLEND_PIPE_CTL,
> > + SUN8I_MIXER_BLEND_PIPE_CTL_EN(chan), val);
>
> ... For example, this part right here will remove the alpha setup
> part, without any justification in the commit log ...
>
> > }
> >
> > static int sun8i_mixer_drm_format_to_layer(struct drm_plane *plane,
> >
> > @@ -71,15 +71,15 @@ static int sun8i_mixer_drm_format_to_layer(struct
> > drm_plane *plane,>
> > {
> >
> > switch (format) {
> >
> > case DRM_FORMAT_ARGB8888:
> > - *mode = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_ARGB8888;
> > + *mode = SUN8I_MIXER_FBFMT_ARGB8888;
> >
> > break;
> >
> > case DRM_FORMAT_XRGB8888:
> > - *mode = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_XRGB8888;
> > + *mode = SUN8I_MIXER_FBFMT_XRGB8888;
> >
> > break;
> >
> > case DRM_FORMAT_RGB888:
> > - *mode = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_RGB888;
> > + *mode = SUN8I_MIXER_FBFMT_RGB888;
> >
> > break;
> >
> > default:
> > @@ -107,7 +107,7 @@ int sun8i_mixer_update_layer_coord(struct sun8i_mixer
> > *mixer,>
> > state->crtc_h));
> >
> > DRM_DEBUG_DRIVER("Updating blender size\n");
> > regmap_write(mixer->engine.regs,
> >
> > - SUN8I_MIXER_BLEND_ATTR_INSIZE(0),
> > + SUN8I_MIXER_BLEND_ATTR_INSIZE(chan),
>
> I guess that one is fixing a bug too.
>
> > SUN8I_MIXER_SIZE(state->crtc_w,
> >
> > state->crtc_h));
> >
> > regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_OUTSIZE,
> >
> > @@ -173,6 +173,7 @@ int sun8i_mixer_update_layer_formats(struct
> > sun8i_mixer *mixer,>
> > return ret;
> >
> > }
> >
> > + val <<= SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_OFFSET;
> >
> > regmap_update_bits(mixer->engine.regs,
> >
> > SUN8I_MIXER_CHAN_UI_LAYER_ATTR(chan, layer),
> > SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK, val);
> >
> > @@ -247,6 +248,7 @@ static int sun8i_mixer_bind(struct device *dev, struct
> > device *master,>
> > struct sun8i_mixer *mixer;
> > struct resource *res;
> > void __iomem *regs;
> >
> > + int plane_cnt;
> >
> > int i, ret;
> >
> > /*
> >
> > @@ -325,27 +327,26 @@ static int sun8i_mixer_bind(struct device *dev,
> > struct device *master,>
> > regmap_write(mixer->engine.regs, SUN8I_MIXER_GLOBAL_CTL,
> >
> > SUN8I_MIXER_GLOBAL_CTL_RT_EN);
> >
> > - /* Initialize blender */
> > - regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_FCOLOR_CTL,
> > - SUN8I_MIXER_BLEND_FCOLOR_CTL_DEF);
> > - regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_PREMULTIPLY,
> > - SUN8I_MIXER_BLEND_PREMULTIPLY_DEF);
> > + /* Set background color to black */
> >
> > regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_BKCOLOR,
> >
> > - SUN8I_MIXER_BLEND_BKCOLOR_DEF);
> > - regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_MODE(0),
> > - SUN8I_MIXER_BLEND_MODE_DEF);
> > - regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_CK_CTL,
> > - SUN8I_MIXER_BLEND_CK_CTL_DEF);
> > + SUN8I_MIXER_BLEND_COLOR_BLACK);
> >
> > - regmap_write(mixer->engine.regs,
> > - SUN8I_MIXER_BLEND_ATTR_FCOLOR(0),
> > - SUN8I_MIXER_BLEND_ATTR_FCOLOR_DEF);
> > -
> > - /* Select the first UI channel */
> > - DRM_DEBUG_DRIVER("Selecting channel %d (first UI channel)\n",
> > - mixer->cfg->vi_num);
> > - regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_ROUTE,
> > - mixer->cfg->vi_num);
> > + /*
> > + * Set fill color of bottom plane to black. Generally not needed
> > + * except when VI plane is at bottom (zpos = 0) and enabled.
> > + */
> > + regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_PIPE_CTL,
> > + SUN8I_MIXER_BLEND_PIPE_CTL_FC_EN(0));
> > + regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_ATTR_FCOLOR(0),
> > + SUN8I_MIXER_BLEND_COLOR_BLACK);
> > +
> > + /* Fixed zpos for now */
> > + regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_ROUTE, 0x43210);
> > +
> > + plane_cnt = mixer->cfg->vi_num + mixer->cfg->ui_num;
> > + for (i = 0; i < plane_cnt; i++)
> > + regmap_write(mixer->engine.regs, SUN8I_MIXER_BLEND_MODE(i),
> > + SUN8I_MIXER_BLEND_MODE_DEF);
>
> You're reworking a significant part here as well, with some part
> moving (or being removed) and no clear justifications as to why you
> need to do that.
>
> This is not only an issue when you want to review this code, but also
> if you happen to introduce a bug, then someone bisects and finds that
> commit. It's quite difficult in that case what part is actually
> breaking stuff.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com


\
 
 \ /
  Last update: 2017-11-28 19:50    [W:0.046 / U:5.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site