lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 4/5] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v5
From
Date
On 11/23/2017 09:12 AM, Boris Ostrovsky wrote:
>
>
> On 11/23/2017 03:11 AM, Christian König wrote:
>> Am 22.11.2017 um 18:27 schrieb Boris Ostrovsky:
>>> On 11/22/2017 11:54 AM, Christian König wrote:
>>>> Am 22.11.2017 um 17:24 schrieb Boris Ostrovsky:
>>>>> On 11/22/2017 05:09 AM, Christian König wrote:
>>>>>> Am 21.11.2017 um 23:26 schrieb Boris Ostrovsky:
>>>>>>> On 11/21/2017 08:34 AM, Christian König wrote:
>>>>>>>> Hi Boris,
>>>>>>>>
>>>>>>>> attached are two patches.
>>>>>>>>
>>>>>>>> The first one is a trivial fix for the infinite loop issue, it now
>>>>>>>> correctly aborts the fixup when it can't find address space for
>>>>>>>> the
>>>>>>>> root window.
>>>>>>>>
>>>>>>>> The second is a workaround for your board. It simply checks if
>>>>>>>> there
>>>>>>>> is exactly one Processor Function to apply this fix on.
>>>>>>>>
>>>>>>>> Both are based on linus current master branch. Please test if they
>>>>>>>> fix
>>>>>>>> your issue.
>>>>>>> Yes, they do fix it but that's because the feature is disabled.
>>>>>>>
>>>>>>> Do you know what the actual problem was (on Xen)?
>>>>>> I still haven't understood what you actually did with Xen.
>>>>>>
>>>>>> When you used PCI pass through with those devices then you have
>>>>>> made a
>>>>>> major configuration error.
>>>>>>
>>>>>> When the problem happened on dom0 then the explanation is most
>>>>>> likely
>>>>>> that some PCI device ended up in the configured space, but the
>>>>>> routing
>>>>>> was only setup correctly on one CPU socket.
>>>>> The problem is that dom0 can be (and was in my case() booted with
>>>>> less
>>>>> than full physical memory and so the "rest" of the host memory is not
>>>>> necessarily reflected in iomem. Your patch then tried to configure
>>>>> that
>>>>> memory for MMIO and the system hang.
>>>>>
>>>>> And so my guess is that this patch will break dom0 on a single-socket
>>>>> system as well.
>>>> Oh, thanks!
>>>>
>>>> I've thought about that possibility before, but wasn't able to find a
>>>> system which actually does that.
>>>>
>>>> May I ask why the rest of the memory isn't reported to the OS?
>>> That memory doesn't belong to the OS (dom0), it is owned by the
>>> hypervisor.
>>>
>>>> Sounds like I can't trust Linux resource management and probably need
>>>> to read the DRAM config to figure things out after all.
>>>
>>> My question is whether what you are trying to do should ever be done
>>> for
>>> a guest at all (any guest, not necessarily Xen).
>>
>> The issue is probably that I don't know enough about Xen: What
>> exactly is dom0? My understanding was that dom0 is the hypervisor,
>> but that seems to be incorrect.
>>
>> The issue is that under no circumstances *EVER* a virtualized guest
>> should have access to the PCI devices marked as "Processor Function"
>> on AMD platforms. Otherwise it is trivial to break out of the
>> virtualization.
>>
>> When dom0 is something like the system domain with all hardware
>> access then the approach seems legitimate, but then the hypervisor
>> should report the stolen memory to the OS using the e820 table.
>>
>> When the hypervisor doesn't do that and the Linux kernel isn't aware
>> that there is memory at a given location mapping PCI space there will
>> obviously crash the hypervisor.
>>
>> Possible solutions as far as I can see are either disabling this
>> feature when we detect that we are a Xen dom0, scanning the DRAM
>> settings to update Linux resource handling or fixing Xen to report
>> stolen memory to the dom0 OS as reserved.
>>
>> Opinions?
>
> You are right, these functions are not exposed to a regular guest.
>
> I think for dom0 (which is a special Xen guest, with additional
> privileges) we may be able to add a reserved e820 region for host
> memory that is not assigned to dom0. Let me try it on Monday (I am out
> until then).


One thing I realized while looking at solution for Xen dom0 is that this
patch may cause problems for memory hotplug. What happens if new memory
is added to the system and we have everything above current memory set
to MMIO?

-boris

\
 
 \ /
  Last update: 2017-11-27 19:31    [W:0.174 / U:1.168 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site