lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 11/29] Drivers: ide: deprecate pci_get_bus_and_slot()
Date
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().

Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/ide/sl82c105.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 8755df3..3300dac 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -239,8 +239,9 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
/*
* The bridge should be part of the same device, but function 0.
*/
- bridge = pci_get_bus_and_slot(dev->bus->number,
- PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
+ dev->bus->number,
+ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
if (!bridge)
return -1;

--
1.9.1
\
 
 \ /
  Last update: 2017-11-27 18:07    [W:0.024 / U:11.364 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site