lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4/4] 44x/fsp2: add irq error handlers
Date
On Thursday, 2 November 2017 4:07:06 PM AEDT Ivan Mikhaylov wrote:
> * add irq error handlers for cmu, plb, opb, mcue, conf
> with debug information output in case of problem.
>
> Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
> ---
> arch/powerpc/platforms/44x/fsp2.c | 204 ++++++++++++++++++++++++++++++++++++-
> 1 files changed, 203 insertions(+), 1 deletions(-)
>
> diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c
> index 4e12490..2bbf9ea 100644
> --- a/arch/powerpc/platforms/44x/fsp2.c
> +++ b/arch/powerpc/platforms/44x/fsp2.c
> @@ -29,6 +29,15 @@
> #include <asm/ppc4xx.h>
> #include <asm/fsp2_reg.h>
> #include <asm/dcr.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +
> +#define FSP2_BUS_ERR "ibm,bus-error-irq"
> +#define FSP2_CMU_ERR "ibm,cmu-error-irq"
> +#define FSP2_CONF_ERR "ibm,conf-error-irq"
> +#define FSP2_OPBD_ERR "ibm,opbd-error-irq"
> +#define FSP2_MCUE "ibm,mc-ue-irq"
> +#define FSP2_RST_WRN "ibm,reset-warning-irq"
>
> static __initdata struct of_device_id fsp2_of_bus[] = {
> { .compatible = "ibm,plb4", },
> @@ -37,6 +46,193 @@
> {},
> };
>
> +static void l2regs(void)
> +{
> + pr_err("L2 Controller:\n");
> + pr_err("MCK: 0x%08x\n", mfl2(L2MCK));
> + pr_err("INT: 0x%08x\n", mfl2(L2INT));
> + pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0));
> + pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1));
> + pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0));
> + pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1));
> + pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2));
> + pr_err("CPUSTAT: 0x%08x\n", mfl2(L2CPUSTAT));
> + pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0));
> + pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0));
> + pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1));
> + pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2));
> + pr_err("WDFSTAT: 0x%08x\n", mfl2(L2WDFSTAT));
> + pr_err("LOG0: 0x%08x\n", mfl2(L2LOG0));
> + pr_err("LOG1: 0x%08x\n", mfl2(L2LOG1));
> + pr_err("LOG2: 0x%08x\n", mfl2(L2LOG2));
> + pr_err("LOG3: 0x%08x\n", mfl2(L2LOG3));
> + pr_err("LOG4: 0x%08x\n", mfl2(L2LOG4));
> + pr_err("LOG5: 0x%08x\n", mfl2(L2LOG5));
> +}
> +
> +static void show_plbopb_regs(u32 base, int num)
> +{
> + pr_err("\nPLBOPB Bridge %d:\n", num);
> + pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));
> + pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1));
> + pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2));
> + pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU));
> + pr_err("GEAR: 0x%08x\n", mfdcr(base + PLB4OPB_GEAR));
> +}
> +
> +static irqreturn_t error_irq_handler(int irq, void *data)
> +{
> + u32 crcs;
> + struct device_node *np = data;
> +
> + if (of_device_is_compatible(np, FSP2_BUS_ERR)) {

Rather than duplicating the logic of irg# -> compatible in a big if/else block
it might be better to have each of these blocks in a seperate irq handler. You
could then just use your node_irq_request() function to take an argument for the
handler to make sure each node has the right debug info printed. Eg:

node_irq_request(FSP2_CMU_ERR, cmu_err_handler);
node_irq_request(FSP2_BUS_ERR, bus_err_handler);
node_irq_request(FSP2_CONF_ERR, conf_err_handler);
node_irq_request(FSP2_OPBD_ERR, opbd_err_handler);
node_irq_request(FSP2_MCUE, mcue_handler);
node_irq_request(FSP2_RST_WRN, rst_wrn_handler);

Where *_handler contains the approriate prints. Then you could also drop the
#define's for the compatible properties and have them directly inline which is
also a little neater.

- Alistair

> + pr_err("Bus Error\n");
> +
> + l2regs();
> +
> + pr_err("\nPLB6 Controller:\n");
> + pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD));
> + pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR));
> +
> + pr_err("\nPLB6-to-PLB4 Bridge:\n");
> + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR));
> + pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH));
> + pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL));
> +
> + pr_err("\nPLB4-to-PLB6 Bridge:\n");
> + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR));
> + pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH));
> + pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL));
> +
> + pr_err("\nPLB6-to-MCIF Bridge:\n");
> + pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0));
> + pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1));
> + pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH));
> + pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL));
> +
> + pr_err("\nPLB4 Arbiter:\n");
> + pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH));
> + pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL));
> + pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));
> + pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));
> + pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH));
> + pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL));
> + pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));
> + pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));
> +
> + show_plbopb_regs(DCRN_PLB4OPB0_BASE, 0);
> + show_plbopb_regs(DCRN_PLB4OPB1_BASE, 1);
> + show_plbopb_regs(DCRN_PLB4OPB2_BASE, 2);
> + show_plbopb_regs(DCRN_PLB4OPB3_BASE, 3);
> +
> + pr_err("\nPLB4-to-AHB Bridge:\n");
> + pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR));
> + pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR));
> + pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR));
> +
> + pr_err("\nAHB-to-PLB4 Bridge:\n");
> + pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR));
> + pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR));
> + panic("Bus Error\n");
> + } else if (of_device_is_compatible(np, FSP2_CMU_ERR)) {
> + pr_err("CMU Error\n");
> + pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0));
> + panic("CMU Error\n");
> + } else if (of_device_is_compatible(np, FSP2_CONF_ERR)) {
> + pr_err("Configuration Logic Error\n");
> + pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC));
> + pr_err("RPERR0: 0x%08x\n", mfdcr(DCRN_CONF_RPERR0));
> + pr_err("RPERR1: 0x%08x\n", mfdcr(DCRN_CONF_RPERR1));
> + panic("Configuration Logic Error\n");
> + } else if (of_device_is_compatible(np, FSP2_OPBD_ERR)) {
> + panic("OPBD Error\n");
> + } else if (of_device_is_compatible(np, FSP2_MCUE)) {
> + pr_err("DDR: Uncorrectable Error\n");
> + pr_err("MCSTAT: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCSTAT));
> + pr_err("MCOPT1: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT1));
> + pr_err("MCOPT2: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT2));
> + pr_err("PHYSTAT: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_PHYSTAT));
> + pr_err("CFGR0: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR0));
> + pr_err("CFGR1: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR1));
> + pr_err("CFGR2: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR2));
> + pr_err("CFGR3: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR3));
> + pr_err("SCRUB_CNTL: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_SCRUB_CNTL));
> + pr_err("ECCERR_PORT0: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_PORT0));
> + pr_err("ECCERR_ADDR_PORT0: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_ADDR_PORT0));
> + pr_err("ECCERR_CNT_PORT0: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_COUNT_PORT0));
> + pr_err("ECC_CHECK_PORT0: 0x%08x\n",
> + mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECC_CHECK_PORT0));
> +
> + pr_err("MCER0: 0x%08x\n",
> + mfdcr(DCRN_CW_BASE + DCRN_CW_MCER0));
> + pr_err("MCER1: 0x%08x\n",
> + mfdcr(DCRN_CW_BASE + DCRN_CW_MCER1));
> +
> + pr_err("BESR: 0x%08x\n",
> + mfdcr(DCRN_PLB6MCIF_BESR0));
> + pr_err("BEARL: 0x%08x\n",
> + mfdcr(DCRN_PLB6MCIF_BEARL));
> + pr_err("BEARH: 0x%08x\n",
> + mfdcr(DCRN_PLB6MCIF_BEARH));
> + panic("DDR: Uncorrectable Error\n");
> + } else if (of_device_is_compatible(np, FSP2_RST_WRN)) {
> + crcs = mfcmu(CMUN_CRCS);
> + switch (crcs & CRCS_STAT_MASK) {
> + case CRCS_STAT_CHIP_RST_B:
> + panic("Received chassis-initiated reset request");
> + default:
> + panic("Unknown external reset: CRCS=0x%x", crcs);
> + }
> + }
> + return IRQ_HANDLED;
> +}
> +
> +static void node_irq_request(const char *compat)
> +{
> + struct device_node *np;
> + irq_handler_t handler = error_irq_handler;
> + unsigned int irq;
> + int32_t rc;
> +
> + for_each_compatible_node(np, NULL, compat) {
> + irq = irq_of_parse_and_map(np, 0);
> + if (irq == NO_IRQ) {
> + pr_err("device tree node %s is missing a interrupt",
> + np->name);
> + return;
> + }
> +
> + rc = request_irq(irq, handler, 0, np->name, np);
> + if (rc) {
> + pr_err("fsp_of_probe: request_irq failed: np=%s rc=%d",
> + np->full_name, rc);
> + return;
> + }
> + }
> +}
> +
> +static void critical_irq_setup(void)
> +{
> + node_irq_request(FSP2_CMU_ERR);
> + node_irq_request(FSP2_BUS_ERR);
> + node_irq_request(FSP2_CONF_ERR);
> + node_irq_request(FSP2_OPBD_ERR);
> + node_irq_request(FSP2_MCUE);
> + node_irq_request(FSP2_RST_WRN);
> +}
> +
> static int __init fsp2_device_probe(void)
> {
> of_platform_bus_probe(NULL, fsp2_of_bus, NULL);
> @@ -105,11 +301,17 @@ static int __init fsp2_probe(void)
> return 1;
> }
>
> +static void __init fsp2_irq_init(void)
> +{
> + uic_init_tree();
> + critical_irq_setup();
> +}
> +
> define_machine(fsp2) {
> .name = "FSP-2",
> .probe = fsp2_probe,
> .progress = udbg_progress,
> - .init_IRQ = uic_init_tree,
> + .init_IRQ = fsp2_irq_init,
> .get_irq = uic_get_irq,
> .restart = ppc4xx_reset_system,
> .calibrate_decr = generic_calibrate_decr,
>


\
 
 \ /
  Last update: 2017-11-27 07:25    [W:0.065 / U:0.984 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site