lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hwmon: (pmbus/lm25066) Default coefficients for low current limit
From
Date
On 11/27/2017 04:28 PM, Robert Lippert wrote:
> There seems to be no way to detect the value of the CL/GAIN pin
> from the device using PMBus.
>
> Low current mode seems to be recommended (from LM5066 datasheet) for
> improved current reporting accuracy in a typical design.
>
> Assume the device is in low current mode unless the register override
> bit is set and indicates high current limit mode.
>
> Signed-off-by: Robert Lippert <rlippert@google.com>

Applied (silently fixed continuation line alignment).

Looking at the most recent version of various datasheets for the chips supported
by the driver, looks like TI changed the coefficients (again). Not the first time.
Time to go through all chips and update coefficients. Might be worthwhile
to do that at least for the chips(s) which are of interest for you.

Thanks,
Guenter

> ---
> drivers/hwmon/pmbus/lm25066.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
> index aa052f4449a9..f6ae7b4cf705 100644
> --- a/drivers/hwmon/pmbus/lm25066.c
> +++ b/drivers/hwmon/pmbus/lm25066.c
> @@ -43,6 +43,7 @@ enum chips { lm25056, lm25063, lm25066, lm5064, lm5066, lm5066i };
> #define LM25066_READ_AVG_IIN 0xde
> #define LM25066_READ_AVG_PIN 0xdf
>
> +#define LM25066_DEV_SETUP_CL_CONFIG BIT(2) /* Use pin or SMBus values */
> #define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */
>
> /* LM25056 only */
> @@ -526,16 +527,22 @@ static int lm25066_probe(struct i2c_client *client,
> info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R;
> info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R;
> info->R[PSC_POWER] = coeff[PSC_POWER].R;
> - if (config & LM25066_DEV_SETUP_CL) {
> - info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
> - info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b;
> - info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
> - info->b[PSC_POWER] = coeff[PSC_POWER_L].b;
> - } else {
> +
> + /*
> + * Assume chip is in low current limit/gain mode by default unless
> + * the register override is asserted AND indicates high limit mode.
> + */
> + if ((config & LM25066_DEV_SETUP_CL_CONFIG) &&
> + (config & LM25066_DEV_SETUP_CL)) {
> info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m;
> info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
> info->m[PSC_POWER] = coeff[PSC_POWER].m;
> info->b[PSC_POWER] = coeff[PSC_POWER].b;
> + } else {
> + info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
> + info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b;
> + info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
> + info->b[PSC_POWER] = coeff[PSC_POWER_L].b;
> }
>
> return pmbus_do_probe(client, id, info);
>

\
 
 \ /
  Last update: 2017-11-28 05:26    [W:0.055 / U:18.708 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site