lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] ath9k: remove stray backslash in Makefile
On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
> ---
> drivers/net/wireless/ath/ath9k/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
> index 36a40ffdce15..90e4a341076c 100644
> --- a/drivers/net/wireless/ath/ath9k/Makefile
> +++ b/drivers/net/wireless/ath/ath9k/Makefile
> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
> obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
> ath9k_common-y:= common.o \
> common-init.o \
> - common-beacon.o \
> + common-beacon.o
>

It's not necessarily stray, there is nothing on the next line so it's
OK, and if you add \ at the end of all lines, you don't have to touch
the last line every time you add/remove something. Sort of like
putting a , after last enum value.

Just my $.02, not that I mind either way :)

> ath9k_common-$(CONFIG_ATH9K_COMMON_DEBUG) += common-debug.o \
> common-spectral.o

\
 
 \ /
  Last update: 2017-11-28 04:36    [W:0.048 / U:45.440 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site