lkml.org 
[lkml]   [2017]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/12] x86/jailhouse: Enable APIC and SMP support
Date
From: Jan Kiszka <jan.kiszka@siemens.com>

Register the APIC which Jailhouse always exposes at 0xfee00000 if in
xAPIC mode or via MSRs as x2APIC. The latter is only available if it was
already activated because there is no support for switching its mode
during runtime.

Jailhouse requires the APIC to be operated in phys-flat mode. Ensure
that this mode is selected by Linux.

The available CPUs are taken from the setup data structure that the
loader filled and registered with the kernel.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
arch/x86/kernel/apic/apic_flat_64.c | 4 +++-
arch/x86/kernel/jailhouse.c | 42 +++++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 226a6ab22b35..408bf5abad4c 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -19,6 +19,7 @@
#include <asm/smp.h>
#include <asm/apic.h>
#include <asm/ipi.h>
+#include <asm/jailhouse_para.h>

#include <linux/acpi.h>

@@ -239,7 +240,8 @@ static void physflat_send_IPI_all(int vector)

static int physflat_probe(void)
{
- if (apic == &apic_physflat || num_possible_cpus() > 8)
+ if (apic == &apic_physflat || num_possible_cpus() > 8 ||
+ jailhouse_paravirt())
return 1;

return 0;
diff --git a/arch/x86/kernel/jailhouse.c b/arch/x86/kernel/jailhouse.c
index fd71b278c308..9682e7089402 100644
--- a/arch/x86/kernel/jailhouse.c
+++ b/arch/x86/kernel/jailhouse.c
@@ -11,6 +11,7 @@
*/

#include <linux/kernel.h>
+#include <asm/apic.h>
#include <asm/cpu.h>
#include <asm/hypervisor.h>
#include <asm/setup.h>
@@ -31,12 +32,43 @@ static uint32_t __init jailhouse_detect(void)
return jailhouse_cpuid_base();
}

+static void __init jailhouse_get_smp_config(unsigned int early)
+{
+ unsigned int cpu;
+
+ if (x2apic_enabled()) {
+ /*
+ * We do not have access to IR inside Jailhouse non-root cells.
+ * So we have to run in physical mode.
+ */
+ x2apic_phys = 1;
+
+ /*
+ * This will trigger the switch to apic_x2apic_phys.
+ * Empty OEM IDs ensure that only this APIC driver picks up
+ * the call.
+ */
+ default_acpi_madt_oem_check("", "");
+ }
+
+ register_lapic_address(0xfee00000);
+
+ for (cpu = 0; cpu < setup_data.num_cpus; cpu++) {
+ generic_processor_info(setup_data.cpu_ids[cpu],
+ boot_cpu_apic_version);
+ }
+
+ smp_found_config = 1;
+}
+
static void __init jailhouse_init_platform(void)
{
u64 pa_data = boot_params.hdr.setup_data;
struct setup_data header;
void *mapping;

+ x86_init.mpparse.get_smp_config = jailhouse_get_smp_config;
+
while (pa_data) {
mapping = early_memremap(pa_data, sizeof(header));
memcpy(&header, mapping, sizeof(header));
@@ -68,8 +100,18 @@ bool jailhouse_paravirt(void)
return jailhouse_cpuid_base() != 0;
}

+static bool jailhouse_x2apic_available(void)
+{
+ /*
+ * The x2APIC is only available if the root cell enabled it. Jailhouse
+ * does not support switching between xAPIC and x2APIC.
+ */
+ return x2apic_enabled();
+}
+
const struct hypervisor_x86 x86_hyper_jailhouse __refconst = {
.name = "Jailhouse",
.detect = jailhouse_detect,
.init.init_platform = jailhouse_init_platform,
+ .init.x2apic_available = jailhouse_x2apic_available,
};
--
2.12.3
\
 
 \ /
  Last update: 2017-11-27 09:14    [W:0.128 / U:34.972 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site