lkml.org 
[lkml]   [2017]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] staging: sm750fb: Fix coding style in ddk750_sii164.h
Date
This patch to ddk750_sii164.h fixes line length warnings found by the
checkpatch.pl script and reformats comments uniformly.

Signed-off-by: Jeremy Lacomis <j.lacomis@gmail.com>
---
drivers/staging/sm750fb/ddk750_sii164.h | 57 +++++++++++++--------------------
1 file changed, 22 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 2e9a88cd6af3..393a3c5be3ae 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -4,15 +4,20 @@

#define USE_DVICHIP

-/* Hot Plug detection mode structure */
+/*
+ * Hot Plug detection mode structure:
+ * Disable Hot Plug output bit (always high).
+ * Use Monitor Detect Interrupt bit.
+ * Use Receiver Sense detect bit.
+ * Use Hot Plug detect bit.
+ */
enum sii164_hot_plug_mode {
- SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
- SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
- SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
- SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
+ SII164_HOTPLUG_DISABLE = 0,
+ SII164_HOTPLUG_USE_MDI,
+ SII164_HOTPLUG_USE_RSEN,
+ SII164_HOTPLUG_USE_HTPLG
};

-
/* Silicon Image SiI164 chip prototype */
long sii164InitChip(unsigned char edgeSelect,
unsigned char busSelect,
@@ -28,7 +33,6 @@ long sii164InitChip(unsigned char edgeSelect,
unsigned short sii164GetVendorID(void);
unsigned short sii164GetDeviceID(void);

-
#ifdef SII164_FULL_FUNCTIONS
void sii164ResetChip(void);
char *sii164GetChipString(void);
@@ -39,35 +43,26 @@ unsigned char sii164CheckInterrupt(void);
void sii164ClearInterrupt(void);
#endif
/*
- * below register definition is used for
+ * The below register definition is used for the
* Silicon Image SiI164 DVI controller chip
*/
-/*
- * Vendor ID registers
- */
+
+/* Vendor ID registers */
#define SII164_VENDOR_ID_LOW 0x00
#define SII164_VENDOR_ID_HIGH 0x01

-/*
- * Device ID registers
- */
+/* Device ID registers */
#define SII164_DEVICE_ID_LOW 0x02
#define SII164_DEVICE_ID_HIGH 0x03

-/*
- * Device Revision
- */
+/* Device Revision */
#define SII164_DEVICE_REVISION 0x04

-/*
- * Frequency Limitation registers
- */
+/* Frequency Limitation registers */
#define SII164_FREQUENCY_LIMIT_LOW 0x06
#define SII164_FREQUENCY_LIMIT_HIGH 0x07

-/*
- * Power Down and Input Signal Configuration registers
- */
+/* Power Down and Input Signal Configuration registers */
#define SII164_CONFIGURATION 0x08

/* Power down (PD) */
@@ -95,9 +90,7 @@ void sii164ClearInterrupt(void);
#define SII164_CONFIGURATION_VSYNC_FORCE_LOW 0x00
#define SII164_CONFIGURATION_VSYNC_AS_IS 0x20

-/*
- * Detection registers
- */
+/* Detection registers */
#define SII164_DETECT 0x09

/* Monitor Detect Interrupt (MDI) */
@@ -127,9 +120,7 @@ void sii164ClearInterrupt(void);
#define SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG 0x30
#define SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG 0x30

-/*
- * Skewing registers
- */
+/* Skewing registers */
#define SII164_DESKEW 0x0A

/* General Purpose Input (CTL[3:1]) */
@@ -149,14 +140,10 @@ void sii164ClearInterrupt(void);
#define SII164_DESKEW_7_STEP 0xC0
#define SII164_DESKEW_8_STEP 0xE0

-/*
- * User Configuration Data registers (CFG 7:0)
- */
+/* User Configuration Data registers (CFG 7:0) */
#define SII164_USER_CONFIGURATION 0x0B

-/*
- * PLL registers
- */
+/* PLL registers */
#define SII164_PLL 0x0C

/* PLL Filter Value (PLLF) */
--
2.11.0
\
 
 \ /
  Last update: 2017-11-25 19:28    [W:0.562 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site