lkml.org 
[lkml]   [2017]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals
Date
Add DT nodes for QSPI, on board LEDS, MMC, I2C, PCA IO expander,
gpio-decoder and regulators on K2G ICE board.

Thanks to Franklin S Cooper Jr <fcooper@ti.com> for initial work on few
peripherals.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-ice.dts | 336 +++++++++++++++++++++++++++++++++
1 file changed, 336 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 78692745e0af..1736eb53ad83 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -30,6 +30,191 @@
status = "okay";
};
};
+
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain_fixed";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ v5_0: fixedregulator-v5_0 {
+ /* TPS54531 */
+ compatible = "regulator-fixed";
+ regulator-name = "v5_0_fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vmain>;
+ regulator-always-on;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdd_1v8: fixedregulator-vdd_1v8 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdds_ddr: fixedregulator-vdds_ddr {
+ /* TLV62080 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdds_ddr_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vref_ddr: fixedregulator-vref_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vref_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: fixedregulator-vtt_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vdd_0v9: fixedregulator-vdd_0v9 {
+ /* TPS62180 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9_fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vddb: fixedregulator-vddb {
+ /* TPS22945 */
+ compatible = "regulator-fixed";
+ regulator-name = "vddb_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-decoder {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
+
+ leds1 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ led0 {
+ label = "status0:red:cpu0";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ led1 {
+ label = "status0:green:usr";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "status0:yellow:usr";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "status1:red:mmc0";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ led4 {
+ label = "status1:green:usr";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "status1:yellow:usr";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led6 {
+ label = "status2:red:usr";
+ gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led7 {
+ label = "status2:green:usr";
+ gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led8 {
+ label = "status2:yellow:usr";
+ gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led9 {
+ label = "status3:red:usr";
+ gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led10 {
+ label = "status3:green:usr";
+ gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led11 {
+ label = "status3:yellow:usr";
+ gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led12 {
+ label = "status4:green:heartbeat";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
};

&k2g_pinctrl {
@@ -39,6 +224,64 @@
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ qspi_pins: pinmux_qspi_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc1_sdcd.gpio0_69 */
+ K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_sdwp.mmc1_sdwp */
+ K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_pow.mmc1_pow */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ user_leds: pinmux_user_leds {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad11.gpio0_11 */
+ K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad12.gpio0_12 */
+ K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad13.gpio0_13 */
+ K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad14.gpio0_14 */
+ K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad15.gpio0_15 */
+ K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_clk.gpio0_16 */
+ K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_wen.gpio0_19 */
+ K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data9.gpio0_44 */
+ K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data10.gpio0_43 */
+ K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data11.gpio0_42 */
+ K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data12.gpio0_41 */
+ K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn0.gpio0_101 */
+ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */
+ >;
+ };
};

&uart0 {
@@ -51,3 +294,96 @@
memory-region = <&dsp_common_memory>;
status = "okay";
};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+ status = "okay";
+
+ flash0: m25p80@0 {
+ compatible = "s25fl256s1", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partition@0 {
+ label = "QSPI.u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@4 {
+ label = "QSPI.kernel";
+ reg = <0x001c0000 0x0800000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x009c0000 0x0040000>;
+ };
+ partition@6 {
+ label = "QSPI.file-system";
+ reg = <0x00a00000 0x1600000>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vdd_3v3>;
+ cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pca9536: gpio@41 {
+ compatible = "ti,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_3v3>;
+ };
+};
--
2.15.0
\
 
 \ /
  Last update: 2017-11-23 08:52    [W:0.101 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site