lkml.org 
[lkml]   [2017]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/6] ARM: dts: keystone-k2g: Move ti,non-removable property to board dts
Date
On 66AK2G EVM mmc1 is connected to emmc whereas 66AK2G ICE baord has SD
card slot connected to mmc1. Therefore move emmc specific
ti,non-removable property from SoC file to EVM's dts file.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 1 +
arch/arm/boot/dts/keystone-k2g.dtsi | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 298a50555e46..03b3e7c5dc8e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -127,6 +127,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ ti,non-removable;
status = "okay";
};

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 01d29320b04c..ef82c0a6e607 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -372,7 +372,6 @@
dma-names = "tx", "rx";
bus-width = <8>;
ti,needs-special-reset;
- ti,non-removable;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
--
2.15.0
\
 
 \ /
  Last update: 2017-11-23 08:52    [W:0.075 / U:6.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site